醴陵马颈坳瓷石矿精选试验初步实践

本文有针对性的介绍了醴陵瓷产区瓷石矿特点及应用情况以及精选工艺试验取得的初步成效;对进一步扩大中间工场试验,综合利用矿山资源,提出了一些可行的设想。对解决生产实际问题,提高产区原料自给率有深远和现实意义。

浅谈新庄瓷石(土)矿特征及性能

在对新庄瓷石(土)矿工作的基础上,对该瓷石(土)矿的地质特征、矿体特征、矿石特征以及该矿床的矿石矿物成份、化学成份和物理性能等方面进行了探讨,并对该矿床的平均化学成份与我国部分瓷石产地矿床的平均化学成份进行了对比。

紫金县朴鸠树高岭土(瓷石)矿水文地质条件特征

紫金县朴鸠树高岭土(瓷石)矿位于广东省紫金县境内,区内水系不发育,气候为亚热带季风气候区。地下水类型简单,主要为HCO_3-Na型或HCO_3-Na·Ca型淡水,大气降水为区内地下水的主要补给来源,充水矿床勘探的复杂程度划分为简单型,属水文地质条件简单矿床。

Dielectric properties and phase transitions of La_2O_3- and Sb_2O_3-doped barium strontium titanate ceramics

The dielectric properties and phase transition characteristics of La2O3- and Sb2O3-doped barium strontium titanate ceramics prepared by solid state route were investigated. The microstructure was identified by X-ray diffraction method and scanning electron microscope was also employed to observe the surface morphologies. It is found that （La,Sb）-codoped barium strontium titanate ceramics exhibit typical perovskite structure and the average grain size decreases dramatically with increasing the content of Sb2O3. Both La3＋ ions and Sb3＋ ions occupy the A-sites in perovskite lattice. The dielectric constant and dielectric loss of barium strontium titanate based ceramics are obviously influenced by La2O3 as well as Sb2O3 addition content. The tetragonal-cubic phase transition of La2O3 modified barium strontium titanate ceramics is of second order and the Curie temperature shifts to lower value with increasing the La2O3 doping content. The phase transition of （La,Sb）-codoped barium strontium titanate ceramics diffuses and the deviation from Curie-Weiss law becomes more obvious with the increase in Sb2O3 concentration. The temperature corresponding to the dielectric constant maximum of （La,Sb）-codoped barium strontium titanate ceramics decreases with increasing the Sb2O3 content, which is attributed to the replacement of host ions by the Sb3＋ ions.

Structure, Electrical and Oxygen Transport Properties of Fe-Doped SrCoO3-δ Perovskites

The structure-property relationship of Fe-doped SrCoO3-δ was studied. With increase of Fe content in SrCol-xFexO3-δ from x=0 to x=0.2, the phase composition changed pro- gressively in the order of hexagonal→brownmillerite （main）＋hexagonal→cubic （main）＋ brownmillerite→single cubic phase. Transition between the hexagonal/brownmillerite phase and the cubic phase took place with variation of the operating conditions, and was associated with remarkable changes in the electrical conductivity and oxygen permeation flux.

Phase, magnetism and thermal conductivity of glass ceramics from iron ore tailings

In order to develop the applications of ore tailings, the glass ceramics were prepared by using a conventional melting-quenching-sintering process. The phase component, microstructures, magnetic properties and thermal conductivities of the prepared glass ceramics were investigated by using X-ray diffractometer, scanning electron microscopy, vibrating sample magnetometer and thermophysical properties tester, respectively. The results show that orthorhombic olivine-type phase and triclinic sunstone-type phase formed when the glass was annealed at 700 oC, the concentration of olivine-type and sunstone-type phases decreased, the spinel-type cubic phase occurred and the amount increased when the annealing temperatures increased. The magnetic properties from the cubic spinel ferrites were detected in the glass ceramics, and the related saturation magnetization increased with the annealing temperature increasing. The porous glass ceramics with magnetic property showed much lower thermal conductivity, compared with the non-magnetic porous glass-ceramic and the dense glass-ceramics.

Preparation and properties of porous ceramics from spodumene flotation tailings by low-temperature sintering

Porous ceramics were prepared with spodumene flotation talings(SFT),kaolin and low-melting point glass(LPG)powder,whose pores were formed by the chemical reaction of hydrogen peroxide(H_(2)O_(2)).LPG was used to reduce the sintering temperature of porous ceramics and kaolin was used to realize the adsorption to methylene blue(MB)of porous ceramics.The average flexural strength,compressive strength,apparent porosity,water absorption and maximum MB adsorption capacity were 5.60 MPa,4.66 MPa,52.27%,44.32%and 0.7 mg/g,respectively.Moreover,the results of orthogonal experiments present that the sintering temperature and the dosage of H_(2)O_(2)had great influence on the mechanical properties and apparent porosity of porous ceramics,respectively.The main reason for the improvement of mechanical properties of porous ceramics was that LPG gradually became soft with increasing the sintering temperature,which made the mineral particles adhere to each other closely.Kaolinite was not completely converted into metakaolin at 550℃,which might be the main reason why porous ceramics had adsorption properties.

Sintering behavior and mechanical properties of sintered ceramics based on spodumene tailings

In this study,ceramics was prepared by slip casting(no pressure was used during shaping step)and atmospheric pressure sintering with low-melting point glass(LPG)powder as the binding material to facilitate the transformation of spodumene flotation tailings(SFTs)into ceramics at lower temperatures.The influence of sintering temperature and mass ratio of LPG on the mechanical properties(flexural strength and compressive strength)of ceramic materials was studied by orthogonal test.The results showed that when the mass ratio of LPG powder was higher than or equal to 20 wt%and the sintering temperature was higher than or equal to 550℃,mutual adhesion between the sample particles was realised and consequently the ceramic materials could be prepared with good mechanical properties(the maximum flexural strength=19.55 MPa,the maximum compressive strength=42.25 MPa,average porosity=24.52%,average apparent density=1.66 g/cm^(3),and average water absorption=14.79%).The sintered ceramics were characterized by XRF,XRD,optical microscopy analysis,SEM,TGA-DSC and FT-IR.The formation of liquid phase at high temperature may lead to the mutual bonding between particles,which might be the main reason for the improvement of mechanical properties of ceramic materials.Overall,SFTs were successfully sintered at low temperature to prepare ceramic materials with good mechanical properties,which are crucial for energy conservation and environmental preservation.

Ferroelectric and piezoelectric properties of SrZrO_3-modified Bi_(0.5)Na_(0.5)TiO_3 lead-free ceramics

The lead-free SrZrO3-modified Bi0.5Na0.5TiO3(BNT-SZ100 x, with x=0-0.15) ceramics were fabricated by a conventional solid-state reaction method. The effects of SZ addition on BNT ceramics were investigated through X-ray diffraction(XRD), scanning electron microscopy(SEM), ferroelectric and electric field-induced strain characterizations. XRD analysis revealed a pure perovskite phase without any traces of secondary phases. Ferroelectric and bipolar field induced-strain curves indicated a disruption of ferroelectric order upon SZ addition into BNT ceramics. A maximum value of remnant polarization(32 μC/cm2) and piezoelectric constant(102 pC/N) was observed at 5%(mole fraction) of SZ. Maximum value of the electric field-induced strain(Smax=0.24%) corresponding to normalized strain(Smax/Emax= d*33= 340 pm/V) was obtained at BNT-SZ9.

Characterization of Pegmatoid from Dimension Stones Tailings for Application as Ceramic Raw Material

Exploitation and processing of pegmatoids at Brazil＇s northeast （Serido region-RN State） aiming further use as dimension stone produces mass losses ranging between 30%-90%. The tailings are predominantly composed by feldspar, quartz, muscovite and other Fe-bearing silicates such as biotite and amphiboles, suitable for ceramic production. The recovery of these elements depends on mica＇s remotion to levels under 2.0%, preferentially by dry methods due the scarce amount of water prevailing at Serido region. This paper presents results from pegmatite tailings characterization from Serido region showing the potentially application as raw material for ceramic production. To do it, a new technological route must be developed to fit it as main component to white ceramic industry, considering the properties required by ceramic industries.

SYNTHESIS OF AG(NB_(0.8) TA_(0.2)) O_3 CERAMICS UNDER DIFFERENT AMBIENT CONDITIONS

Different ambient conditions for the synthesis of Ag（Nb0.8Ta0.2）O3 ceramics were investi- gated. The Ag（Nb0.8Ta0.2）O3 powder was synthesized at 950 ℃ under different ambient conditions, and then pressed into disks and sintered between 1060 ℃ and 1100 ℃ respectively. Samples were investigated by X-ray diffraction, scanning electron microscopy and dielectric measurement. The results show that perovskite Ag（Nb0.8Ta0.2）O3 powder was easier to be synthesized in air than in vacuum at 950℃. Grain size of ceramic samples sintered in air was uniform （about 1 μm） and its dielectric loss was small for its high density. However, the samples decomposed greatly and ceramics could hardly be densified when sintered in vacuum, Thus,. higher atmospheric pressure and oxygen atmosphere would benifit the synthesis of Ag （Nb0.8Ta0.2）O3, and suppress its decomposition at high temperature.

Study the Physical, Chemical, Mineralogical, and Geo-technical Properties of Soils Used in Pottery Industries, Kurdistan-lraq

The study area is located in Duhok and Sulaimania province in Kurdistan region, lraq. Study soils developed from parent material that has derived from limestone. Randomize, composed and disturbed surface soil samples were collected. The bulk soils were air dried, crushed and passed through 2 mm sieve. Standard methods were used for chemical, physical, geotechnical and mineralogical analyses of soil samples. The results indicated that the study soils texture were clay to loam clay, this texture was considered as suitable for ceramic and pottery industries as a result of increasing clay contents that ranged between 301 g/kg and 676 g/kg. Soil consistence depending on geotechnical properties increased the ability of study soils for resistance rapture and deformation. Existence the high amount of cementing agents in study soils such as organic matter, iron oxides and particularly total carbonate （247.2-308.8 g/kg） act to reduce the bad effect of the smectite minerals group （high shrinkage） in soils of study locations through increasing the resistance of these soils for rupture and deformation. The existing of Kaolinite, palygorskite and chlorite allows clay to be dried in ceramic and pottery industries without cracking from shrinkage. Study soils were different in their colors as a result of existence, different pigmentation materials that led to coloring soils with different colors in turn caused coloring of pottery and ceramic materials. Since, there are no available academic studies or researches about this subject in Kurdistan region in addition the clay pottery and ceramic sector still has a good market at the same time using this type of soils for arts, therefore, this study was conducted.

Perovskite Formation and Dielectric Responses in PZN Modified PMF-PZT Ceramics

PMF-PZN-PZT （0.01Pb（Mol/3Fe2/3）O3-xPb（Znl/3Nb2/3）O3-（O.99-x）P（Zro53Tio 47）03 piezoelectric ceramics）, where x = 0.00 0.01, 0.03, 0.05 and 0.07 were prepared by a conventional mixed-oxide method. The results show that the pure peroveskit phase forms in these ceramics. X-ray diffraction analysis indicated that the phase of the material is a MPB （morphotropic phase boundary） structure. The effects of PZN content on the crystal structure and electrical properties were investigated, optimal dielectric properties were achieved at composition x = 0.07 ceramics by calcination at 800 ℃ and sintering at 1,180 ℃, with a curie temperature of approximately 430 ℃. These results clearly show the significance of PZN in controlling the electrical responses of the PMF-PZN-PZT system.