Effects of Different Management Modes on Yield and Nutrient Efficiency of Ginger

In order to establish high-yield and high-efficient cultivation technology for ginger in the central region of Shandong Province, the effects of different manage-ment modes on yield of ginger, nutrient efficiency and soil nitrate were carried out by field experiment. Four management modes were farmer convention mode, high yield and high efficiency mode, super high yield mode and super high yield and high efficiency mode, in which farmer convention mode was local farmers ’ conven-tional cropping methods, the other three management modes were optimized combi-nations of al management measures under a certain goal of increasing yield and efficiency. The results were as fol ows： ginger yield and nitrogen fertilizer efficiency under such three optimized management measures combinations as high yield and high efficiency mode, super high yield mode and super high yield and high efficien-cy mode were al higher than these of farmer convention mode, moreover, com-pared with farmer convention mode, the yield increased by 11.85%, 25.75% and 23.34%, respectively, and nitrogen fertilizer efficiency increased by 47.94%, 11.24%and 33.14%, respectively. Thereinto, the yield under super high yield mode were the greatest,and nitrogen fertilizer efficiency under high yield and high efficiency mode was the highest.

超薄异质结太阳能电池性能的研究

随着硅片切割技术的不断进步,越来越薄的晶体硅太阳能电池成为光伏组件产品成本下降的重要途径之一。 在各种不同的太阳能电池工艺路线之中,异质结太阳能电池以其正反双面对称的结构,以及全程低温工艺的特点,显示出优于其它太阳能电池工艺路线的对于超薄太阳能硅片的兼容性。本文主要通过实验方法,测试超薄硅片在异质结生产线上的电池性能以及生产良率。并针对硅片的厚度,提出异质结电池的生产改善方案。

The quantified analysis of China's GM cotton yield capacity by C-D function and stochastic frontier model

Using a modified C D function and stochastic frontier model, the paper analyzed China's cotton yield capacity and found that the yield and technical efficiency of China's cotton planting system can be increased by the use of genetically modified (GM) varieties.

Multi-objective optimization of rolling schedule based on cost function for tandem cold mill

In terms of tandem cold mill productivity and product quality, a multi-objective optimization model of rolling schedule based on cost fimction was proposed to determine the stand reductions, inter-stand tensions and rolling speeds for a specified product. The proposed schedule optimization model consists of several single cost fi.mctions, which take rolling force, motor power, inter-stand tension and stand reduction into consideration. The cost function, which can evaluate how far the rolling parameters are from the ideal values, was minimized using the Nelder-Mead simplex method. The proposed rolling schedule optimization method has been applied successfully to the 5-stand tandem cold mill in Tangsteel, and the results from a case study show that the proposed method is superior to those based on empirical formulae.

Evaluation for Use Efficiency of Agricultural Resources in Grain Production:A Case Study of Changshu,Taihe and Ansai in China

This paper aims to establish an index system for evaluation of agricultural resources use efficiency(ARUE) in grain production and discuss the causes of low efficiency and high consumption of agricultural resources in Changshu of Jiangsu Province,Taihe of Jiangxi Province and Ansai of Shaanxi Province in China by analyzing the data about meteorology,soil,water consumption and grain production. Agro-ecological Zone(AEZ) method was adopted to calculate the potential productivity,and synthetically multivariate equation was used to evaluate the ARUE of study areas. This paper can be concluded as:1) the agricultural resources in grain production can be classified into five categories,i.e.,climatic resources,water resources,land resources,biological resources and assistant resources,and 15 indexes were selected to evaluate their use efficiency in grain production;2) the values of ARUE in grain production are 0.5868,0.6368 and 0.5390 respectively in Changshu,Taihe and Ansai;and 3) Changshu ranks the highest among the three study areas in terms of the use efficiency of climatic resources and biological resources(evaluation values are 0.0277 and 0.1530) ,but Taihe tops the three in terms of the use efficiency of water resources,land resources and assistant resources(evaluation values are 0.0502,0.2945 and 0.1379 respectively) . However,the ARUE remains always low in Ansai for all the resources. The inefficiencies are caused by poor grain revenue in Changshu,deficient agriculture investments in Taihe and unfavorable natural conditions in Ansai.

Comparison of growth and survival of larvae among different shell color stocks of bay scallop Argopecten irradians irradians(Lamarck 1819)

In order to improve production and breed new broods of bay scallop Argopecten irradians irradians, different-colored orange, purple and white lines were established by two mating methods of self-fertilization and mass spawning at a commercial scallop hatchery in spring, 2002. And then larval growth and survival of different lines was compared to test whether there is a relationship between shell color and growth and survival at early developmental stage. Both growth and survival have no significant differences among different experimental larvae of self-fertilization or mass spawning. Results are as following in the order of orange, purple and white shell stock. For the self-fertilization, growth rates of larvae were 6.174, 6.412, and 6.599 μm/d, respectively. Survival rates of larvae at Day 3 were 74.41%, 76.86%, and 82.05%; Day 6 were 49.14%, 65.63%, and 52.79%; and Day 9 were 25.06%, 20.80%, and 26.47%, respectively. For the mass spawning, the growth rates were 7.836, 7.941, and 7.878 μm/d, respectively. Survival rates at Day 3 were 93.05%, 91.95%, and 92.50%; Day 6 were 79.17%, 78.05%, and 82.50%; and Day 9 were 34.72%, 36.67%, and 38.33%, respectively. The absence of any relationship between shell color and growth and survival at the larval stage may be resulted from their common genetic basis.

Re-measuring Status of China＇s High-Tech Industries in International Division of Labor： Applying a Non-Competitive Input-Output Model

Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the index of＂ weighted value-added productivity ＂ by compiling non-competitive input-output tables which distinguish high-tech industries from traditional industries. The new method effectively avoids ＂statistical illusion＂ which stems from a biased focus on gross exports under intra-product specialization. The empirical study shows that since 1995, the status of China＇s high-tech industries has grown quickly as a result of enhanced labor productivity, but still lags behind those of major developed countries. In addition, the study also suggests that the status of China＇s high-tech industries has been over-estimated using the traditional gross export statistical method.

Development of process energy intensity formula under different state variables

In a production process, the actual energy consumption is greatly affected by the production state. Certain processing operations are classified into six states, including normal production, abnormal production, planned overhaul, unplanned overhaul, transitional period from unplanned overhaul to normal production (referred for short as unplanned transition) and transitional period from planned overhaul to normal production (referred for short as planned transition). The article takes the analysis of relationship between different states of a certain processing operation and corresponding energy consumptions as a startup point to develop a process energy intensity formula with variables of operating rate, yielding rate and operating frequency, etc. This process energy intensity formula can be used to analyze effectively the pattern of impact exerted by different state variables on energy consumption.

Measurement of Technical, AIIocative and Economic Efficiency of Tomato Farms in Northern Pakistan

The study measures productive efficiency of tomato growers in village Akbarpura of Disctrict Nowshera in Khyber Pakhtunkhwa （KPK） province of Northern Pakistan. The study uses household level data collected in summer 2010 from sample farmers selected by multi-staged sampling. The study uses a theoretical framework to measure productive efficiency and estimates the Cobb-Douglas frontier production and cost models. The study found that technical efficiency indices varied significantly, with technical efficiency index averaging at 65%. The indices of allocative efficiency also varied widely, with an average of 56%. There was a wide gap between the highest and lowest economic efficiency indices, with a mean economic efficiency of 35%. The study concluded that farmer education, extension visits, age and access to credit contributed significantly and positively to productive efficiencies. A policy implication of this study is that there is enough potential for farmers to increase tomato production and net profits. The study recommends that the government should further invest in public education and strengthen extension services farmer education and because extension visits constituted important determinants of productive efficiencies.

Impact of Inflation, Dollar Exchange Rate and Interest Rate on Red Meat Production in Turkey： Vector Autoregressive （VAR） Analysis

In this study, impact of inflation （WPI--Wholesale Price Index）, exchange rate, and interest rate on the production of red meat in Turkey was examined using the vector autoregressive （VAR） model. The model consisting of variables of dollar exchange rate, inflation rate, interest rate, beef, buffalo meat, mutton, and goat meat production amounts has been estimated for the period from 1981 to 2014. It has been detected that there is a tie among the dollar exchange rate, inflation rate, interest rate, and the amount of red meat production in Turkey. In order to determine the direction of this relation, Granger causality test was conducted. A one-way causal relation has been observed between： the goat meat production and dollar exchange rate; the buffalo meat production and the mutton production; and the beef production and the mutton production. To interpret VAR model, the impulse response function and variance decomposition analysis was used. As a result of variance decomposition, it has been detected that explanatory power of changes in the variance of dollar exchange rate, inflation rate, and interest rate in goat meat production amount is more than explanatory power of changes in the variances of mutton, beef, and buffalo meat variables.

Design of intrinsically safe power supply

Aiming to make a high power direct current supply safely used in coal mine production, this paper made a deep research on characteristics of intrinsically safe power supply, using the mathematical model established according to coal mine intrinsic safety standards. It provides theory support for the application of high power intrinsically safe power supply. The released energy of output short circuit of switch power supply, and the close related factors that influence the biggest output short-circuit spark discharge energy are the theoretical basis of the power supply. It is shown how to make a high power intrinsically safe power supply using the calculated values in the mathematical model, and take values from intrinsically safe requirements parameters scope, then this theoretical calculation value can be developed as the ultimate basis for research of the power supply. It gets the identification method of intrinsically safe from mathematics model of intrinsically safe power supply characteristics study, which solves the problem of theory and application of designing different power intrinsically safe power supply, and designs a kind of high power intrinsically safe power supply through this method. energy, flyback

Microalgae Lipid Triggering by Cooling Stressing

Microalgae lipids/oils are a promising feedstock for biodiesel production. The desired lipids are triacylglycerols. These can either be transesterified to biodiesel or decarboxylated to ＂green diesel＂. Increasing microalgae lipids production by thermal stressing is important in improving the economics of biodiesel production, but its effectiveness needs to be determined. This paper focuses on the effect of cooling stressing lipid triggering on the microalgae production and lipids yield. Two microalgae species were studied, Chlorella sp. and Dunaliella. In each case, microalgae were grown in two identical 2 L PBRs （photobiorectors） at room temperature. At the end of the exponential growth phase, one PBR was placed in a cold environment while the other PBR was left at room temperature. Microalgae was harvested, freeze dried and the algae oil was extracted. Measurements show that cooling stressing slightly increased the biomass of algae （11% for C2 and 13% for Dunaliella）, but it decreased the lipids content of the microalgae, 62% for Chlorella sp. and 13% for Dunaliella. The net effect is a decrease in the lipid production rate （mg lipid/L-day） 58% in case of Chlorella sp., and 2% in case of Dunaliella.

Prevalence of Rice Diseases in Ogor and Orum Sub-counties, Otuke District

Rice （Oryza sativa L.） is an important food staple in most of the tropical and sub tropical countries of the world. In Uganda, rice has grown to become an important food security crop and source of cash income for the majority of the rural farming communities across the country. Despite its importance, rice production has consistently remained low averaging 1.5 t/ha under farm conditions. The low production of rice is attributed to a number of production constraints. Therefore the objective of the survey was to ascertain the major production constraints in rice growing in the two sub-counties of Orum and Ogor, Otuke district. A diagnostic survey using semi- structured questionnaires was conducted in the two sub counties between July and August 2010 to gather information on the major production constraints from key informants, opinion leaders, farmers, technical and political leaderships. The findings showed that diseases were the major constraints in rice production accounting to 27% compared to other constraints. The other constraints included insect pests （23%）, weeds （21%）, drought （20%） and low prices （9%）. The major diseases encountered were rice blast （30%）, brown spot （23%）, rice yellow mottle virus （19%）, sheath rot （15%） and grain rot （13%）. Overall, diseases accounted for 79% of the yield reduction in rice. The implication of these findings therefore is that diseases and other constraints in rice production must be adequately identified for easy management to ensure sustainable rice production. More importantly, farmers should be sensitised on disease recognition, means of spread and control.

Study and application on the evaluation method of porous formation for long-term waterflooding sand reservoir

Nine targets which stand both for the static characteristic of produced formations and the dynamic parameter of wells including the average permeability,variation coefficient of permeability,moving capability,remaining recoverable reserves,coefficient of flooding,daily oil production,increasing rate of water cut,cumulative liquid production per unit meter and efficiency index of oil production are selected as the evaluation indexes,a novel model to evaluate the porous formations in long-term waterflooding sand reservoir was established by using the support vector machine and clustering analysis. Data of 57 wells from Shentuo 21 block Shengli oilfield was analyzed by using the model. Four kinds of formation groups were gained. According to the analysis result,different adjustment solutions were put forward to develop the relevant formations. The Monthly oil production increased 7.6 % and the water cut decreased 8.9 % after the adjusted solutions. Good results indicate that the learning from this method gained will be valuable adding to other long-term waterflooding sand reservoirs in Shengli oilfield and other similar reservoirs worldwide.

Desalination by Simple Solar Distiller Assisted by a Heat Pump

The increase in the population of Tunisia and the industrial development posed with acuity during the end of the major problems. Without contribution of additional resources, water will then be likely to be done increasingly rare. The solar still is a small production system, yielding on average 2-5 L/day. In this study we propose a solar distiller assisted by a heat pump. The design of this distiller uses for the evaporation of water and its condensation two phenomena are studied Simple Solar Distiller （SSD） and Simple Solar Still Distiller Hybrid with heat Pump （SSDHP）. The performance is less than 2 L/mVday and a performance of 30% for the SSD. But the SSDHP is 12 L/m2/day, the energetic efficiency reaches 90%.

Re-measuring Productivity, Energy and Environmental Factors of China＇s New Industrialization

This paper identifies low-carbon, energy-efficient, and green economic growth as the primary goals of China＇s new industrialization and defines productivity under new industrialization which; unlike conventional productivity, simultaneously satisfies these goals. In contrast to conventional methods for measuring productivity, this paper employs a non-radial, non-angular SBM directional distance function to estimate new industrialization productivity of industrial sectors across 30 Chinese provinces, municipalities and autonomous regions between 1998 and 2008. Our research shows that conventional measurements of productivity overestimate industrial growth in China＇s central and western regions. On the whole, prospects for growth performance of China＇s industrial sectors are not optimistic. The degree of new industrialization is higher in eastern region than in central and western regions, where balancing industrial growth with resources and the environment is a daunting task. This paper＇s conclusions support ＂environmental Kuznets curve＂ and ＂Porter hypothesis＂ but reject ＂pollution asylum hypothesis ＂.

Methane adsorption-induced coal swelling measured with an optical method

In order to quantify the effect of matrix shrinkage on reservoir permeability during coalbed methane production, coal samples from Huozhou, Changzhi and Jincheng areas in Shanxi province （classified as high-volatile bituminous coal, low-volatile bituminous coal and anthracite, respectively） were collected, and adsorption-induced coal swelling in methane were determined by an optical method at 40 ℃ and pressure up to 12 MPa. All three coals showed similar behavior-that swelling increased as a function of pressure up to about 10 MPa but thereafter no further increase in swelling was observed. Swelling in the direction perpendicular to the bedding plane is greater than that parallel to the bedding plane, and the differences are about 7.77-8.33%. The maximum volumetric swelling ranges from 2.73% to 3.21 %-increasing with increasing coal rank. The swelling data can be described by a modified DR model. In addition, swelling increases with the amount of adsorption. However, the increase shows a relatively slower stage followed by a relatively faster stage instead of a linear increase. Based on the assumption that sorption-induced swelling/shrinkage of coal in methane is reversible, the permeability increases induced by coal shrinkage during methane desorption was analyzed, and the results indicate that the permeability change is larger for higher rank coal in the same unit of pressure depletion.

Increasing Production Efficiency through Casting Quality Improving by Electromagnetic Field Applying

The increased production efficiency of heat treatable A1 alloys, as the result of applied electromagnetic field during continuous casting process was investigated. The applied frequency of the electromagnetic field （EMF） during the AI alloys continuous casting was changing from 30 Hz to 50 Hz, while some castings were obtained without the EMF influence. The mechanical characterization of continuous casted AI alloys EN AW 2007 and En AW 2024 was done on testing machine Zwick/Roell Z 100. The microstructure of as-cast samples was examined, as well. When the frequency decreases （from 50 Hz to 30 Hz）, the grain size decreases as well, what is noticeable through the finer microstructure and its uniformity throughout the cross-section. These results have shown that low frequency electromagnetic field significantly influenced the microstructure and therefore the mechanical properties of as cast ingots. Thus, through improved castings quality, operation time and energy savings, the production efficiency was increased.

Recombinants for Enhanced Productivity and Drought Tolerance in Barley （Hordeum vulgare L.）

In an attempt to enhance productivity as well as drought tolerance of barley cultivar, a 5 × 5 diallel cross involving rainfed cultivars was made. Of the 10 crosses, cross K603 x K560 was most promising as it yielded highest number of recombinants （21 in irrigated and 36 in rainfed conditions）; the cultivar K506 was considered as drought resistant （drought susceptibility index 〈 1）. A total of 22 out of 64 and 18 out of 59 most promising F2 recombinants in irrigated and rainfed conditions, respectively from 6 crosses were evaluated for yield, harvest index as well as proline content. All the recombinants selected under rainfed condition （including a few from irrigated condition） showed enhanced level of proline content coupled with high grain yield and harvest index. Further, a total of twenty-nine segregants （12 rainfed and 17 irrigated derived cultures） showing significantly higher values of proline content and grain yield were grown during 2007-2008 under both the environments, rainfed and irrigated to determine the geometric mean （GM） and drought susceptibility index （S）. The segregants （Culture No. 8, 10 ＆ 13） derived from cross K 603 × K 560 and culture No. 5 from K 560 × RD 2508 gave maximum mean yield under rainfed and geometric mean coupled with lower drought susceptibility index （S）. Also, it has been observed that the transgressive segregants selected from limited water environment （rainfed） performed better than those selected from irrigated environment for higher grain yield and drought tolerance.

Decoherence,Orbit,and Classical Linear Frequency Entropy:Quantum-Classical Correspondence

The decoherence process is analyzed for an open quantum system that is classically chaotic,with a classicallinear frequency entropy developed to measure the stability of classical motion,Investigation shows that the decoherencemeasured by the rate of quantum linear entropy production varies significantly with both the underlying classical orbitsand the classical linear frequency entropy.Such correspondence is also supported by the further investigation on theLoschmidt Echo.