期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
电厂冷却水管化学镀Ni-Co-P/PTFE复合镀层及其防垢耐蚀性能
1
作者 李鹏飞 颜武岳 《电镀与精饰》 CAS 北大核心 2021年第1期18-24,共7页
在电厂冷却水管常用的20#钢表面化学镀Ni-Co-P镀层,并以沉积速率作为指标,通过单因素实验得到化学镀Ni-Co-P镀层较优的溶液成分和工艺条件。在此基础上,通过向溶液中添加PTFE制备出Ni-Co-P/PTFE复合镀层,进一步研究了PTFE浓度对Ni-Co-P/... 在电厂冷却水管常用的20#钢表面化学镀Ni-Co-P镀层,并以沉积速率作为指标,通过单因素实验得到化学镀Ni-Co-P镀层较优的溶液成分和工艺条件。在此基础上,通过向溶液中添加PTFE制备出Ni-Co-P/PTFE复合镀层,进一步研究了PTFE浓度对Ni-Co-P/PTFE复合镀层防垢耐蚀性能的影响。结果表明,随着PTFE浓度增加,Ni-Co-P/PTFE复合镀层的生垢速率和平均腐蚀速率都呈先减小后增大的趋势,与PTFE质量分数先升高后下降有关联性。PTFE浓度为25 mL/L时,Ni-Co-P/PTFE复合镀层的生垢速率和平均腐蚀速率均最小,依次为1.66×10^−2 g/(m^2·h)和1.85×10^−5 g/(cm^2·h)。该复合镀层经24 h生垢实验后表面的污垢呈稀疏分布,覆盖面积小,经84 h浸泡实验后表面的蚀坑相对较小,表现出较好的防垢耐蚀性能。 展开更多
关键词 Ni-Co-P/PTFE复合镀层 化学镀 性能 生垢速率 耐蚀性能 平均腐蚀速率
下载PDF
Scaling in Rate-Changeable Birth and Death Processes with Random Removals
2
作者 KE Jian-Hong LIN Zhen-Quan CHEN Xiao-Shuang 《Communications in Theoretical Physics》 SCIE CAS CSCD 2009年第1期165-169,共5页
We propose a monomer birth-death model with random removals, in which an aggregate of size k can produce a new monomer at a time-dependent rate I(t)k or lose one monomer at a rate J(t)k, and with a probability P(... We propose a monomer birth-death model with random removals, in which an aggregate of size k can produce a new monomer at a time-dependent rate I(t)k or lose one monomer at a rate J(t)k, and with a probability P(t) an aggregate of any size is randomly removed. We then anedytically investigate the kinetic evolution of the model by means of the rate equation. The results show that the scaling behavior of the aggregate size distribution is dependent crucially on the net birth rate I(t) - J(t) as well as the birth rate I(t). The aggregate size distribution can approach a standard or modified scaling form in some cases, but it may take a scale-free form in other cases. Moreover, the species can survive finally only if either I(t) - J(t) ≥ P(t) or [J(t) + P(t) - I(t)]t ≈ 0 at t ≥ 1; otherwise, it will become extinct. 展开更多
关键词 kinetic behavior birth/death rate changeable scaling law
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部