Microbial fuel cells （MFCs） rely on microbial conversion of organic substrates to electricity. The optimal perfor- mance depends on the establishment of a microbial community rich in electrogenic bacteria. Usually t...Microbial fuel cells （MFCs） rely on microbial conversion of organic substrates to electricity. The optimal perfor- mance depends on the establishment of a microbial community rich in electrogenic bacteria. Usually this micro- bial community is established from inoculation of the MFC anode chamber with naturally occurring mixed inocula. In this study, the electrochemical performance of MFCs and microbial community evolution were eval- uated for three inocula including domestic wastewater （DW）, lake sediment （LS） and biogas sludge （BS） with varying substrate loading （Lsub） and external resistance （Rext） on the MFC. The electrogenic bacterium Geobacter sulfurreducens was identified in all inocula and its abundance during MFC operation was positively linked to the MFC performance. The IS inoculated MFCs showed highest abundance （18% ± 1%） of G. sulfurreducens, maximum current density [Imax = （690 ± 30） mA.m 2] and coulombic efficiency （CE = 29% ±1%） with acetate as the substrate./max and CE increased to （1780 ± 30） mA.m-2 and 58%± 1%, respectively, after decreasing the Rext from 1000 Ωto 200 Ω, which also correlated to a higher abundance ofG. sulfurreducens （21% ±0.7%） on the MFC anodic biofilm. The data obtained contribute to understanding the microbial community response to Lsub and Roy, for of timizing electricity eneration in MFCs.展开更多
OBJECTIVE: To investigate the biomechanical characters of human dura and its substitutes and to establish guidelines for selection of optimal repair materials for reconstruction of skull base defects. METHODS: A measu...OBJECTIVE: To investigate the biomechanical characters of human dura and its substitutes and to establish guidelines for selection of optimal repair materials for reconstruction of skull base defects. METHODS: A measurement of creep properties of human dura and its substitutes were conducted using biomechanical tests. The dynamic changes of biomechanical properties of canine dura obtained from skull base defects were observed as well. RESULTS: The creep properties of human dura presented a linear-relationship between initial strain and stress, and the creep strain increased slowly with time. The creep compliance formula for human dura and its substitutes was as follows: J (t) = J(0) + Kf (t). The initial compliance of canine dura in skull base defects was reduced by 35%, 46% and 50%, respectively 1, 3 and 6 months after surgery. CONCLUSION: The optimal material for the repair of skull base defects can be estimated using creep compliance analysis. The less the compliance, the better the property of anti-protrusion. Fresh human dura is the least compliant and then in increasing order are lyophilized human dura, fresh human pericranium, Terylene and silicon membranes. The pattern of biomechanical characteristics of the dura mater at skull base defects shows that the strain ability of the dura mater decreases distinctly for 1 - 3 months and then remains almost unchanged for 3 - 6 months after surgery.展开更多
Most previous researches have focused on biochar application in agricultural soils; however, limited information is available concerning the effects of biochar amendment on greenhouse substrate properties. A greenhous...Most previous researches have focused on biochar application in agricultural soils; however, limited information is available concerning the effects of biochar amendment on greenhouse substrate properties. A greenhouse experiment was conducted to investigate effects of wheat straw biochar （0-160 mL L-1） and super absorbent polymer （SAP, 0.8 g L-1） on physical and chemical properties of a substrate based on spent pig litter compost and the growth of water spinach （Ipomoea aquatica Forsk）. Total porosity, water-holding capacity~ pH and electrical conductivity （EC） of the substrate significantly increased with increasing biochar rates, especially in the substrate without SAP. The values of pH and EC were significantly lower in the substrate with SAP than those without SAP at the high biochar application rates （100-160 mL L-l）. The germination rates of water spinach decreased with increasing biochar rates when biochar was added alone （76.9%-83.7%）, whereas the rates increased to 83.6%-85.8% when biochar was added in combination with SAP. Growth parameters of water spinach and nutrient uptake by shoots and roots increased with increasing biochar rates and reached the maximum values at the biochar rate of 100 mL L-1. There were significant cubic relationships between the uptake of nutrients （N, P, and K） and biochar rates, both with and without SAP addition. In order to avoid negative effects on plant growth, the biochar application rate should be controlled at an optimal level （100 mL L-1 ）. The SAP addition not only enhanced the positive effects of biochar application on the properties of the substrate, but also inhibited the excessive rise of pH and EC following biochar additions, which led to better plant growth and enhanced nutrient uptakes by water spinach.展开更多
基金grateful to Danida Fellowship Centre for supporting the research project (Biobased electricity in developing countries,DFC No.11-091 Ris?)The financial support from China Scholarship Council (CSC No.2011635051) for Guotao Sun is gratefully acknowledged.Annette E.Jensen,DTU is thanked for technical support
文摘Microbial fuel cells （MFCs） rely on microbial conversion of organic substrates to electricity. The optimal perfor- mance depends on the establishment of a microbial community rich in electrogenic bacteria. Usually this micro- bial community is established from inoculation of the MFC anode chamber with naturally occurring mixed inocula. In this study, the electrochemical performance of MFCs and microbial community evolution were eval- uated for three inocula including domestic wastewater （DW）, lake sediment （LS） and biogas sludge （BS） with varying substrate loading （Lsub） and external resistance （Rext） on the MFC. The electrogenic bacterium Geobacter sulfurreducens was identified in all inocula and its abundance during MFC operation was positively linked to the MFC performance. The IS inoculated MFCs showed highest abundance （18% ± 1%） of G. sulfurreducens, maximum current density [Imax = （690 ± 30） mA.m 2] and coulombic efficiency （CE = 29% ±1%） with acetate as the substrate./max and CE increased to （1780 ± 30） mA.m-2 and 58%± 1%, respectively, after decreasing the Rext from 1000 Ωto 200 Ω, which also correlated to a higher abundance ofG. sulfurreducens （21% ±0.7%） on the MFC anodic biofilm. The data obtained contribute to understanding the microbial community response to Lsub and Roy, for of timizing electricity eneration in MFCs.
基金ThisstudywassupportedbyagrantfromtheNationalNaturalScienceFoundationofChina (No 3 9670 199)
文摘OBJECTIVE: To investigate the biomechanical characters of human dura and its substitutes and to establish guidelines for selection of optimal repair materials for reconstruction of skull base defects. METHODS: A measurement of creep properties of human dura and its substitutes were conducted using biomechanical tests. The dynamic changes of biomechanical properties of canine dura obtained from skull base defects were observed as well. RESULTS: The creep properties of human dura presented a linear-relationship between initial strain and stress, and the creep strain increased slowly with time. The creep compliance formula for human dura and its substitutes was as follows: J (t) = J(0) + Kf (t). The initial compliance of canine dura in skull base defects was reduced by 35%, 46% and 50%, respectively 1, 3 and 6 months after surgery. CONCLUSION: The optimal material for the repair of skull base defects can be estimated using creep compliance analysis. The less the compliance, the better the property of anti-protrusion. Fresh human dura is the least compliant and then in increasing order are lyophilized human dura, fresh human pericranium, Terylene and silicon membranes. The pattern of biomechanical characteristics of the dura mater at skull base defects shows that the strain ability of the dura mater decreases distinctly for 1 - 3 months and then remains almost unchanged for 3 - 6 months after surgery.
基金supported by the National Natural Science Foundation of China (No.41401259)the General Financial Grant from the China Postdoctoral Science Foundation (No.2014M551528)+1 种基金the Independent Innovation Project of Jiangsu Province,China (No.CX(14)2035)the Special Scientific Research Fund of Agricultural Public Welfare Profession of China (No.201203050)
文摘Most previous researches have focused on biochar application in agricultural soils; however, limited information is available concerning the effects of biochar amendment on greenhouse substrate properties. A greenhouse experiment was conducted to investigate effects of wheat straw biochar （0-160 mL L-1） and super absorbent polymer （SAP, 0.8 g L-1） on physical and chemical properties of a substrate based on spent pig litter compost and the growth of water spinach （Ipomoea aquatica Forsk）. Total porosity, water-holding capacity~ pH and electrical conductivity （EC） of the substrate significantly increased with increasing biochar rates, especially in the substrate without SAP. The values of pH and EC were significantly lower in the substrate with SAP than those without SAP at the high biochar application rates （100-160 mL L-l）. The germination rates of water spinach decreased with increasing biochar rates when biochar was added alone （76.9%-83.7%）, whereas the rates increased to 83.6%-85.8% when biochar was added in combination with SAP. Growth parameters of water spinach and nutrient uptake by shoots and roots increased with increasing biochar rates and reached the maximum values at the biochar rate of 100 mL L-1. There were significant cubic relationships between the uptake of nutrients （N, P, and K） and biochar rates, both with and without SAP addition. In order to avoid negative effects on plant growth, the biochar application rate should be controlled at an optimal level （100 mL L-1 ）. The SAP addition not only enhanced the positive effects of biochar application on the properties of the substrate, but also inhibited the excessive rise of pH and EC following biochar additions, which led to better plant growth and enhanced nutrient uptakes by water spinach.
