This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generat...This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generate optimal triangulation; the other is coupling the classic paving and Delaunay triangulation for optimal quadrilateral meshing. Various electric machine models are meshed successfully to demonstrate the robustness and effectiveness of the methods.展开更多
[Objective] The paper was to carry out ecological geochemical survey and ecological risk assessment on the heavy metals in latosol in western area of Hainan Island.[Method] The contents of six heavy metals including C...[Objective] The paper was to carry out ecological geochemical survey and ecological risk assessment on the heavy metals in latosol in western area of Hainan Island.[Method] The contents of six heavy metals including Cr,Cu,Zn,As,Cd and Pb in latosol in western area of Hainan Island were analyzed.Single-factor index method and Hakanson ecological risk index method were used to evaluate the integrated pollution effect of heavy metals in latosol.[Result] The average contents of Cr,Cu,Zn,As,Cd and Pb in latosol in western area of Hainan Island were 65.57,35.16,93.56,8.50,0.24 and 79.29 mg/kg,respectively.The major pollution factor of heavy metal was Pb.The sequence of influence factors of various heavy metals was PbCu = ZnCrAsCd.The potential ecological risk coefficient of various heavy metals was PbCdCuAsCrZn.The average value of potential ecological risk index（RI）was 45.14,belonging to low ecological risk range.[Conclusion] The heavy metal pollution in latosol in western area of Hainan Island belongs to slight pollution.展开更多
The fourth BRICS Healt h Ministers’Meeting was held in Brasilia,Brazil’s capital,on December 5.Brazilian Health Minister Arthur Chioro,South African Health Minister Pakishe Aaron Motsoaledi,Indian Vice-Health Minist...The fourth BRICS Healt h Ministers’Meeting was held in Brasilia,Brazil’s capital,on December 5.Brazilian Health Minister Arthur Chioro,South African Health Minister Pakishe Aaron Motsoaledi,Indian Vice-Health Minister Vishwa Mohan Katoch and Russian ViceHealth Minister Kostennikov Dmitry attended the meeting.展开更多
Sixteen controlled low-strength material( CLSM)mixtures with various cement-to-sand( C/Sa) ratios and water-to-solid( W/So) ratios were prepared using recycled fine aggregate from urban red brick based construction wa...Sixteen controlled low-strength material( CLSM)mixtures with various cement-to-sand( C/Sa) ratios and water-to-solid( W/So) ratios were prepared using recycled fine aggregate from urban red brick based construction waste.The fluidity and bleeding of the fresh CLSM mixtures were measured via the modified test methods, and the hardened CLSM mixtures were then molded to evaluate their compressive strength and durability. The results showthat the fluidity of the fresh CLSM mixtures is 105 to 227 mm with the corresponding bleeding rate of 3. 7% to 15. 5%, which increases with the increase in fluidity. After aging for 28 d,the compressive strength of the hardened CLSM mixtures reaches 1. 15 to 13. 96 M Pa, and their strength can be further enhanced with longer curing ages. Additionally, the strength increases with the increase of the C/Sa ratio, and decreases with the increase of the W/So ratio under the same curing age. Based on the obtained compressive strength, a fitting model for accurately predicting the compressive strength of the CLSM mixtures was established, which takes into account the above two independent variables( C/Sa and W/So ratios).M oreover, the durability of the hardened CLSM mixtures is enhanced for samples with higher C/Sa ratios.展开更多
文摘This paper describes two modified methods for triangular and quadrilateral meshing for finite element analysis of 2D electric machines. One is coupling the classic Delaunay method and advancing front method to generate optimal triangulation; the other is coupling the classic paving and Delaunay triangulation for optimal quadrilateral meshing. Various electric machine models are meshed successfully to demonstrate the robustness and effectiveness of the methods.
基金Supported by Natural Science Foundation of Hainan Province (40879)Educational Commission of Hunan Province of China (HJKJ2010-28)+1 种基金Scientific Research Foundation for Returned Scholars,Ministry of Education of ChinaCo-financing of Key Subjects"Cartography and Geographic Information System" and "Physical Geography"of Hainan Normal University~~
文摘[Objective] The paper was to carry out ecological geochemical survey and ecological risk assessment on the heavy metals in latosol in western area of Hainan Island.[Method] The contents of six heavy metals including Cr,Cu,Zn,As,Cd and Pb in latosol in western area of Hainan Island were analyzed.Single-factor index method and Hakanson ecological risk index method were used to evaluate the integrated pollution effect of heavy metals in latosol.[Result] The average contents of Cr,Cu,Zn,As,Cd and Pb in latosol in western area of Hainan Island were 65.57,35.16,93.56,8.50,0.24 and 79.29 mg/kg,respectively.The major pollution factor of heavy metal was Pb.The sequence of influence factors of various heavy metals was PbCu = ZnCrAsCd.The potential ecological risk coefficient of various heavy metals was PbCdCuAsCrZn.The average value of potential ecological risk index（RI）was 45.14,belonging to low ecological risk range.[Conclusion] The heavy metal pollution in latosol in western area of Hainan Island belongs to slight pollution.
文摘The fourth BRICS Healt h Ministers’Meeting was held in Brasilia,Brazil’s capital,on December 5.Brazilian Health Minister Arthur Chioro,South African Health Minister Pakishe Aaron Motsoaledi,Indian Vice-Health Minister Vishwa Mohan Katoch and Russian ViceHealth Minister Kostennikov Dmitry attended the meeting.
基金The National Science and Technology Support Program of China(No.2014BAC07B03)the Science and Technology Project of Transportation Committee of Beijing Government(No.2016-LZJKJ-01-006)the National Natural Science Foundation of China(No.51278016)
文摘Sixteen controlled low-strength material( CLSM)mixtures with various cement-to-sand( C/Sa) ratios and water-to-solid( W/So) ratios were prepared using recycled fine aggregate from urban red brick based construction waste.The fluidity and bleeding of the fresh CLSM mixtures were measured via the modified test methods, and the hardened CLSM mixtures were then molded to evaluate their compressive strength and durability. The results showthat the fluidity of the fresh CLSM mixtures is 105 to 227 mm with the corresponding bleeding rate of 3. 7% to 15. 5%, which increases with the increase in fluidity. After aging for 28 d,the compressive strength of the hardened CLSM mixtures reaches 1. 15 to 13. 96 M Pa, and their strength can be further enhanced with longer curing ages. Additionally, the strength increases with the increase of the C/Sa ratio, and decreases with the increase of the W/So ratio under the same curing age. Based on the obtained compressive strength, a fitting model for accurately predicting the compressive strength of the CLSM mixtures was established, which takes into account the above two independent variables( C/Sa and W/So ratios).M oreover, the durability of the hardened CLSM mixtures is enhanced for samples with higher C/Sa ratios.
