Aim To study fuel dispersion in fuel air explosive(FAE) and computational ways of fuel dispersion velocity in the near area. Methods\ The dispersion process of fuel in FAE was analyzed by the use of results measured ...Aim To study fuel dispersion in fuel air explosive(FAE) and computational ways of fuel dispersion velocity in the near area. Methods\ The dispersion process of fuel in FAE was analyzed by the use of results measured with KODAK EKTAPRO EM Motion Analyzer and setting up mechanical models. Results\ Computational methods for fuel dispersion velocity in the acceleration stage is given and taken as a base for the study of fuel dispersion in the intermediate and the far area. Conclusion\ When the fuel flow velocity is higher than that of the explosion gas in the center cavity, the fuel divides with the explosion gas and its velocity of flow reaches a maximum. The acceleration stage ends at that time. The fuel dispersion velocity at this time is the initial conditions for numeral analyses of dispersion process in the intermediate and far areas.展开更多
The results of experimental works aimed on finding the optimal composition of concretes containing alternative materials as mineral additives for assurance their high resistance to chemical aggressive attack are prese...The results of experimental works aimed on finding the optimal composition of concretes containing alternative materials as mineral additives for assurance their high resistance to chemical aggressive attack are presented in the paper. 4 kinds of additives （blast furnace slag, fly ash, non-treated and treated serpentinite waste） and 4 kinds of aggressive environments （distilled water, HCI, MgSO4 and NaOH） representing the concrete corrosive processes was checked within experimental process. The open laboratory curing was used as a reference environment. Moreover, the amounts of additives were varied, so 16 various recipes were checked on the whole. The resistance of samples was tested in the terms of flexural strength, compressive strength and evaluation of decrease/increase of strengths after long time （28 months） exposition in monitored aggressive media. Based on obtained results, it is possible for each of aggressive environments recommend the most promising recipe from various points of view, in accordance with user＇s priorities. From the percentage increase of 28-day compressive strengths point of view, there are： for HCI action - recipe with 20% of non treated serpentinite waste with plasticizer application, for MgSO4 action - recipe with 20% of blast furnace slag without plasticizer application and for NaOH action - recipe with 10% of non treated serpentinite waste without plasticizer application. Application of alternative materials as partial substitution of cement appears to be beneficial for achievement the resistance to aggressive chemical actions. With the keeping or enhancement of technical parameters it extra represents both the environmental and economic benefit.展开更多
The work describes the properties of soluble organic silicates and their applications to obtain nanocomposite materials. We analyzed the properties of the water-soluble high-modulus silicate systems and their technolo...The work describes the properties of soluble organic silicates and their applications to obtain nanocomposite materials. We analyzed the properties of the water-soluble high-modulus silicate systems and their technology for producing. The aim of this paper is the comparison properties of binders based on liquid glass containing strong organic bases silicates. We have shown how these systems are transformed from lower to higher oligomers through the formation of the silica sol and the implementation of the sol-gel process for these oligomers. We have conducted advanced research of various aspects of the use of these materials as the binder. Advantages of strong organic bases silicates in the preparation of heat resistant, nanocomposite materials are shown. Ways to obtaining quaternary ammonium silicates and their use to produce nanocomposites are proposed. Products obtained in this way can be used as a binder in the preparation of nanostruetured composite materials, water-based paints, coatings, etc. Modifiers have been proposed for making of hybrid nanostructured composite materials by a sol-gel process. There have been shown of structuring phenomena some aspects, synthesis and application of hybrid materials based on silica with grafted polymers. It has been shown, the possibility of modifying compositions using the nanostructuring agents such as tetrafurfuryloxysilane. This paper also describes methods for the synthesis of products for modifying a sol-gel process using organic soluble silicates. We are displaying their use for the production of new nanocomposite materials and coatings for protection against various external factors.展开更多
文摘Aim To study fuel dispersion in fuel air explosive(FAE) and computational ways of fuel dispersion velocity in the near area. Methods\ The dispersion process of fuel in FAE was analyzed by the use of results measured with KODAK EKTAPRO EM Motion Analyzer and setting up mechanical models. Results\ Computational methods for fuel dispersion velocity in the acceleration stage is given and taken as a base for the study of fuel dispersion in the intermediate and the far area. Conclusion\ When the fuel flow velocity is higher than that of the explosion gas in the center cavity, the fuel divides with the explosion gas and its velocity of flow reaches a maximum. The acceleration stage ends at that time. The fuel dispersion velocity at this time is the initial conditions for numeral analyses of dispersion process in the intermediate and far areas.
文摘The results of experimental works aimed on finding the optimal composition of concretes containing alternative materials as mineral additives for assurance their high resistance to chemical aggressive attack are presented in the paper. 4 kinds of additives （blast furnace slag, fly ash, non-treated and treated serpentinite waste） and 4 kinds of aggressive environments （distilled water, HCI, MgSO4 and NaOH） representing the concrete corrosive processes was checked within experimental process. The open laboratory curing was used as a reference environment. Moreover, the amounts of additives were varied, so 16 various recipes were checked on the whole. The resistance of samples was tested in the terms of flexural strength, compressive strength and evaluation of decrease/increase of strengths after long time （28 months） exposition in monitored aggressive media. Based on obtained results, it is possible for each of aggressive environments recommend the most promising recipe from various points of view, in accordance with user＇s priorities. From the percentage increase of 28-day compressive strengths point of view, there are： for HCI action - recipe with 20% of non treated serpentinite waste with plasticizer application, for MgSO4 action - recipe with 20% of blast furnace slag without plasticizer application and for NaOH action - recipe with 10% of non treated serpentinite waste without plasticizer application. Application of alternative materials as partial substitution of cement appears to be beneficial for achievement the resistance to aggressive chemical actions. With the keeping or enhancement of technical parameters it extra represents both the environmental and economic benefit.
文摘The work describes the properties of soluble organic silicates and their applications to obtain nanocomposite materials. We analyzed the properties of the water-soluble high-modulus silicate systems and their technology for producing. The aim of this paper is the comparison properties of binders based on liquid glass containing strong organic bases silicates. We have shown how these systems are transformed from lower to higher oligomers through the formation of the silica sol and the implementation of the sol-gel process for these oligomers. We have conducted advanced research of various aspects of the use of these materials as the binder. Advantages of strong organic bases silicates in the preparation of heat resistant, nanocomposite materials are shown. Ways to obtaining quaternary ammonium silicates and their use to produce nanocomposites are proposed. Products obtained in this way can be used as a binder in the preparation of nanostruetured composite materials, water-based paints, coatings, etc. Modifiers have been proposed for making of hybrid nanostructured composite materials by a sol-gel process. There have been shown of structuring phenomena some aspects, synthesis and application of hybrid materials based on silica with grafted polymers. It has been shown, the possibility of modifying compositions using the nanostructuring agents such as tetrafurfuryloxysilane. This paper also describes methods for the synthesis of products for modifying a sol-gel process using organic soluble silicates. We are displaying their use for the production of new nanocomposite materials and coatings for protection against various external factors.
