Pyrolysis of phenol formaldehyde resin has been investigated by Pyrolysis Gas Chromatography-Mass Spectroscopy at the different temperatures from 500℃ to 750℃. Its composition of pyrclysates has been analyzed. Sever...Pyrolysis of phenol formaldehyde resin has been investigated by Pyrolysis Gas Chromatography-Mass Spectroscopy at the different temperatures from 500℃ to 750℃. Its composition of pyrclysates has been analyzed. Several compounds, especially benzene, toluene, p-xylene could only be formed above 500-550℃. Howerver, peak intensities for some pbend derivatives were decreased at the higher temperature. During pyrolysis, for thermo-setting phenol formaldehyde resins, polymeric chain scissions take place as a successive removal of the monomer units from the polymeric chain. The chain scissions are followed by secondary reactions, which leads to a variety of compounds. Addition reactions can also take place among the double-bond compounds during pyrolysis.展开更多
The synthesis of gold nanoparticles caped with visible light-responsible TiO2 nanoparticles. was prepared by using electrochemical Oxidation-Reduction Cycles （ORC） in 0.1 M HCI aqueous solution containing 60 mM visi...The synthesis of gold nanoparticles caped with visible light-responsible TiO2 nanoparticles. was prepared by using electrochemical Oxidation-Reduction Cycles （ORC） in 0.1 M HCI aqueous solution containing 60 mM visible light-responsible TiO2 nanoparticles. Firstly, an Au substrate was cycled in a deoxygenated aqueous solution containing 0.1 M HCI and 60 mM anatase TiO2 nanoparticles from -0.28 to ＋1.22 V vs Ag/AgCI at 500 mV/s with 25 scans. The durations at the cathodic and anodic vertexes are 10 and 5 s, respectively. After this process, Au-and TiO2-containing complexes were left in the solution. Then a Pt electrode immediately replaced the Au working electrode, and a cathodic overpotential of 0.6 V from the Open Circuit Potential （OCP） was applied under sonification to synthesize Au nanoparticles. Encouragingly, the prepared Au nanoparticles caped with visible light-responsible TiO2 nanoparticles are more active for the decomposition of formaldehyde than pure visible light-responsible TiO2 nanoparticles are in the same condition. After 5 days testing, the formaldehyde was decomposed ca. 35% in containing Au nanoparticles caped with visible light-responsible TiO2 nanoparticles, but the formaldehyde was decomposed only ca. 25% in containing pure visible light-responsible TiO2 nanoparticles.展开更多
A method for decomposition of cellulose to produce 5-hydroxymethyl-furaldehyde （5- HMF） in subcritical water-carbon dioxide binary system was proposed. A series of experiments were performed in a batch reaction vess...A method for decomposition of cellulose to produce 5-hydroxymethyl-furaldehyde （5- HMF） in subcritical water-carbon dioxide binary system was proposed. A series of experiments were performed in a batch reaction vessel. Main products of the decomposition of cellulose are 5-HMF, furfural, levulinic acid and 1, 2, 4-benzenetrioI.The optimum condition for the preparation of 5-HMF was found as 523.15 K, 5.0% carbon dioxide mole fraction, and 30 min reaction time. The addition of carbon dioxide to water conduced to the decomposition of cellulose to 5-HMF. As can be seen from the distribution of the prod-ucts, the decomposition mechanism of cellulose is similar to the hydrothermal reaction of D-glucose and D-fructose.展开更多
文摘Pyrolysis of phenol formaldehyde resin has been investigated by Pyrolysis Gas Chromatography-Mass Spectroscopy at the different temperatures from 500℃ to 750℃. Its composition of pyrclysates has been analyzed. Several compounds, especially benzene, toluene, p-xylene could only be formed above 500-550℃. Howerver, peak intensities for some pbend derivatives were decreased at the higher temperature. During pyrolysis, for thermo-setting phenol formaldehyde resins, polymeric chain scissions take place as a successive removal of the monomer units from the polymeric chain. The chain scissions are followed by secondary reactions, which leads to a variety of compounds. Addition reactions can also take place among the double-bond compounds during pyrolysis.
文摘The synthesis of gold nanoparticles caped with visible light-responsible TiO2 nanoparticles. was prepared by using electrochemical Oxidation-Reduction Cycles （ORC） in 0.1 M HCI aqueous solution containing 60 mM visible light-responsible TiO2 nanoparticles. Firstly, an Au substrate was cycled in a deoxygenated aqueous solution containing 0.1 M HCI and 60 mM anatase TiO2 nanoparticles from -0.28 to ＋1.22 V vs Ag/AgCI at 500 mV/s with 25 scans. The durations at the cathodic and anodic vertexes are 10 and 5 s, respectively. After this process, Au-and TiO2-containing complexes were left in the solution. Then a Pt electrode immediately replaced the Au working electrode, and a cathodic overpotential of 0.6 V from the Open Circuit Potential （OCP） was applied under sonification to synthesize Au nanoparticles. Encouragingly, the prepared Au nanoparticles caped with visible light-responsible TiO2 nanoparticles are more active for the decomposition of formaldehyde than pure visible light-responsible TiO2 nanoparticles are in the same condition. After 5 days testing, the formaldehyde was decomposed ca. 35% in containing Au nanoparticles caped with visible light-responsible TiO2 nanoparticles, but the formaldehyde was decomposed only ca. 25% in containing pure visible light-responsible TiO2 nanoparticles.
文摘A method for decomposition of cellulose to produce 5-hydroxymethyl-furaldehyde （5- HMF） in subcritical water-carbon dioxide binary system was proposed. A series of experiments were performed in a batch reaction vessel. Main products of the decomposition of cellulose are 5-HMF, furfural, levulinic acid and 1, 2, 4-benzenetrioI.The optimum condition for the preparation of 5-HMF was found as 523.15 K, 5.0% carbon dioxide mole fraction, and 30 min reaction time. The addition of carbon dioxide to water conduced to the decomposition of cellulose to 5-HMF. As can be seen from the distribution of the prod-ucts, the decomposition mechanism of cellulose is similar to the hydrothermal reaction of D-glucose and D-fructose.
