基于全光法和电光法的三角形脉冲产生技术

利用光子学的技术来产生微波信号是目前一个热门的研究课题,在通信系统、信号处理、雷达等领域有着广泛应用。主要介绍了利用光子学的技术来生成具有三角形时域特性的光脉冲信号的方法,并对全光法以及包含频谱控制和时域叠加在内的电光法进行详细介绍和对比,从脉冲重复频率的调谐能力、脉冲占空比、脉冲类型、系统结构稳定性等方面分析其优缺点。

基于电光变换法的真空断路器监测研究

文中介绍了真空断路器的电气特性及现有真空断路器检测手段,分析了各种手段的优劣,选择了用电光变换法作为监测装置的方法;其次详细介绍了电光变换法的原理、模糊控制理论与小波变换理论,为装置和系统的设计奠定基础;设计了基于电光变换法的真空断路器在线监控装置,同时展示了与其配套的在线监控系统;最后根据试验结果,进行了社会效益、经济效益、生产和经营管理的分析,制定了巡检特征值与巡检策略,并分析了该成果的整体水平。在线监控系统的上位机采用VB6.0进行人机交互界面的开发,交互界面友好、直观,能够存储、筛选和显示真空断路器的历史和实时信息状态。真空断路器在线监控装置经过试验和调试,能够正常工作。

绝缘子表面电场及电荷的测量

绝缘子表面电荷积聚及其引起的表面电场分布畸变是导致绝缘子表面闪络电压低的主要原因。对绝缘子表面电场及电荷分布进行测量有助于正确地设计绝缘子。为此,在阅读大量相关文献及进行技术调研的基础上,结合作者目前正在进行的研究,对绝缘子表面电场及电荷的测量技术进行了综述。首先简要分析了绝缘子表面电荷的来源(场致发射、局部放电、固体介质夹层极化、电导率分布不均匀或非线性、表面金属微粒等),然后详细介绍了几种绝缘子表面电荷及电场的测量技术,包括静电探头法(有源静电探头和无源静电探头)、粉尘图法、电光法(克尔效应和普克尔斯效应),最后分析了这几种方法的优缺点。

The Determination of Heavy Metal Elements in Honey by MWD-ICP-AES

In order to build method for measuring of elements in honey, the contents of Ba, Cu, Pb, Cd, As, Hg, Cr, Mn, Se had been determined by microwave diges- tion （MWD） and actively coupled plasma atomic emission spectrometry （ICP-AES）. The results show that, the range of heavy metal elements were in the range of 0- 10.0 mg/L, with good linear relationship. In addition, all correlation coefficients kept higher than 0.999, and the recovery rate of ample added with standard solution was in 94.1%-110%. By comparison with the result of chemical experiment, the method was quickly accessible and convenient, widely used in the measurement of elements in honey, with satisfactory results.

Research on Activity and Expression of Tyrosinase in Varicorhinus macrolepis

[Objective] This study aimed to analyze tyrosinase activity and its expression in Varicorhinus macrolepis. [Method] V. macrolepis was used as experimental material for the analysis and research of tyrosinase in nine kinds of organs and tissues of male and female V. macrolepis individuals by using polyacrylamide gel electrophoresis and biochemical staining method, spectrophotometry and enzyme histochemical technology. [Result] Tyrosinase exists in the liver and pancreas, intestine and spleen of female and male V. macrolepis and in the gallbladder of male V. macrolepis. Tyrosinase activities in various tissues of V. macrolepis varied largely. Specifically, tyrosinase activities in the spleen was the maximum, which was higher in female V. macrolepis than in males. According to the enzyme histochemistry results, strong positive signals of tyrosinase existed in the spleen, intestine, liver and pancreas and gallbladder of V. macrolepis, which was the strongest in the spleen. [Conclusion] In this paper, research on tissue localization of tyrosinase in V. macrolepis had been first reported, which provided theoretical basis for further exploring the functions of tyrosinase in V. macrolepis.

EVALUATION OF ELECTROMAGNETIC SCATTERING OF TWO DIMENSIONAL CONDUCTING OBJECTS--TE CASE

A hybrid technique is developed for the evaluation of two dimensional electromagnetic scattering from electrically large conducting bodies with cracks on their surfaces (TE case). The edge based finite element method (FEM) is employed to compute the scattering from the cracks. Physical optics (PO) and physical theory of diffraction (PTD) are utilized to evaluate the scattering from the large bodies with the cracks filled with perfect conductors. These two methods are combined by an efficient coupling scheme. Some of numerical results are presented. It is shown that the hybrid technique has some advantages over other methods in regard to saving computer memory units and CPU time.

The Determination of Heavy Metal Elements in Sipunculs nudus by MWD-ICP-AES

In order to develop a method for measuring of elements in Sipunculus nudus, the contents of Cu, Pb, Cd, Cr, Mn, As, Hg and Ba were determined by actively coupled plasma atomic emission spectrometry （MWD） and microwave digestion （ICP-AES）. The results showed that correlation coefficients al kept higher than 0.999 and the recovery rates of sample added standard solutions were in 98%-114%. The results indicated that the contents of Cu, Pb, Cd, Cr, Mn, As, Hg and Ba were 17.119, 3.781, 0.695, 7.351, 1997.982, 0.620, 0.144, 4.249 mg/kg respectively. The contents of Mn exceeded national limit by hundredfold, Cd sevenfold, Pd fourfold, Cd three-and-a-half-fold, and As onefold. Sipunculs nudus became seriously pol uted. Therefore, it is necessary to formulate robust policies to fol ow closely and pay close attention to coastal areas pol ution around Dongfang City.

Fabrication of Silicon Crystal-Facet-Dependent Nanostructures by Electron-Beam Lithography

Silicon crystal-facet-dependent nanostructures have been successfully fabricated on a （100）-oriented silicon-oninsulator wafer using electron-beam lithography and the silicon anisotropic wet etching technique. This technique takes advantage of the large difference in etching properties for different crystallographic planes in alkaline solution. The minimum size of the trapezoidal top for those Si nanostructures can be reduced to less than 10nm. Scanning electron microscopy （SEM） and atomic force microscopy （AFM） observations indicate that the etched nanostructures have controllable shapes and smooth surfaces.

Analysis of variabilities of serum proteomic spectra in patients with gastric cancer before and after operation

AIM： To study the variabilities of serum proteomic spectra in patients with gastric cancer before and after operation in order to detect the specific protein markers that can be used for quick diagnosis of gastric cancer. METHODS： Proteomic spectra of 46 serum samples from patients with gastric cancer before and after operation and 40 from normal individuals were generated by IMAC-Cu protein chip and surface-enhanced laser desorption/ionization time of flight mass spectrometry. RESULTS： Fourteen differentially expressed proteins in serum were screened by analysis of proteomic spectra of preoperative patients and normal individuals. We obtained 4 proteins （heat shock protein 27, glucoseregulated protein, prohibitin, protein disulfide isomerase A3） making up marker pattern which was able to class the patient-team and normal-team. These marker patterns yielded 95.7% sensitivity and 92.5% specificity, respectively. The proteins over-expressed in serum of preoperative patients were obviously down-regulated. CONCLUSION： Specific protein markers of gastric cancer can be used for the quick diagnosis of gastric cancer and judgment of prognosis. SELDI-TOF-MS is a useful tool for the detection and identification of new protein markers in serum.

Plant Proteomics in the Post-genomic Era

Proteomics is one of the most active research fields in the post-genomic era. Here we briefly introduce the scientific background of the origination of proteomics and its content, research method. The new developments of proteomics at the levels of individual plants, tissues, organs and organells, as well as its applications in the area of plant genetic diversity, mutant characterization, and plant physiology, etc are reviewed. At last, the challenge and prospect of proteomics are discussed.

A Real-time Modeling of Photovoltaic Array

This paper mainly aims at the modeling problem of the photovoltaic (PV) array with a 30 kW PV grid-connected generation system. An iterative method for the time-varying parameters is proposed to model a plant of PV array. The relationship of PV cell and PV array is obtained and the solution for PV array model is unique. The PV grid-connected generation system is used to demonstrate the effectiveness of the proposed method by comparing the calculated values with the actual output of the system.

Effect of PSA tin plating process on trace lead in tin coating

In this paper,effects of conditions in phenol sulfonic acid(PSA) plating for tin coating of MR low carbon aluminum killed steel on trace Pb were examined.Trace Pb was measured by atomic absorption spectrometry(AAS)and glow discharge spectrometry,and coating morphology was observed by scanning electronic microscopy(SEM).Corrosion resistance of the tin coating was analyzed by electrochemical methods.The results indicated that Pb content in the tin coating reduced as bath temperature increased.When the temperature exceeded40 ℃,the grains in the coating were coarse and loose,reducing the corrosion resistance.As current density increased,Pb content increased rapidly,while low current density plating could lead to drain regions.The plating speed had no obvious effect on trace Pb in tin coating.In the tin plating layer,Pb was enriched at the surface and gradually reduced to zero along the depth.At bath temperature of 40 ℃ and current density of 20 A·dm^(-2),the amount of Pb could be less than 100 mg·kg^(-1) with excellent corrosion resistance.

Electronic image stabilization algorithm based on fixed-lag smooth filtering

An algorithm using fixed-lag smooth filtering to improve the precision of EIS algorithm is presented in this paper. Ftrstly, gray projection algorithm （GPA） is used to calculate the interframe global motion vectors. Secondly, the fixed-lag smooth filter is used to smoothen the motion track of the original video sequence, according to different motion models. At last, the original sequence is compensated by using the compensation vectors calculated from filtering. This algorithm has been proved superior in filtering precision by experiments of video sequences in different motion scenes. This algorithm also satisfies the real-time request.

Purification of indium by vacuum distillation and its analysis

High purity （99.999% or 5N, mass fraction） indium （In） was obtained through vacuum distillation using a 2N （99%） In as input material under a dynamic vacuum of 5 Pa. The glow discharge mass spectrometry （GDMS） was applied for the analysis of input material and the distilled indium. The results indicate that high-volatile impurities namely Cd, Zn, T1 and Pb can be removed from the indium matrix at the low fraction stage of 1 223 K for 120 min; Low-volatile impurities such as Fe, Ni, Cu, Sn can be reduced at the high fraction stage of 1 323 K for 120 min. The separation coefficient ,8i and activity coefficient Yi of impurities are calculated according to the experiments to fill the inadequate data of the thermodynamics.

Measurement of Rotatory Optics Element in Tensor Dielectric Matrix for Rotatory Optical Fiber

The rotatory optics element in the tensor dielectric coefficient matrix is an important para-(meter) for analyzing and calculating a rotatory optical fiber by electromagnetic theory. But the mea-(surement) of rotatory optics element is difficult for the rotatory optical fiber. A simple principle and method for measuring rotatory optics element are put forward in this paper. Firstly by using electromagnetic theory it was demonstrated that the rotatory optics element has a simple linear relation with the rotatory angle, and then the rotatory optics element has a simple linear relation with the magnetic field strength (or bias current in the helix coil) . Secondly a measurement system for the rotatory optics element in the rotatory optical fiber was designed. Using the measurement system the rotatory element can be obtained by measuring the bias current simply.

Negative Corona Discharge Ion Source Under Ambient Conditions with Mini Line-cylinder Electrodes

A novel ambient negative corona discharge ion source with mini line-cylinder electrodes is designed. The diameters of inner and outer electrode are 0.16 and 4 mm respectively. With a special assembly method, a perfect coaxiality of the two electrodes is obtained. An injection system utilizing a temperature control technique, achieves a constant and stable concentration of the sample, which is critical to the experiment. The formulas of the corona onset voltage of line-cylinder electrodes are also introduced. The experiment results show that negative substances such as formic acid and acetic acid can be ionized under ambient conditions. When combined with micro electrical mechanical system fabricationprocess, the volume of the ion source can be reduced dramatically, but there is an undesirable surface discharge. To solve the surface discharge problem, an improved structure was designed and tested. The simplicity of the interface of the ion source makes it suitable for mass spectrometer, micro mass spectrometer, ion mobility spectrometer, and high-field asymmetric waveform ion mobility spectrometer applications.

Effects of heavy metal on dielectric properties of E. coli revealed by dielectric spectroscopy

Dielectric spectroscopy of E. coli cell before and after exposure to heavy metals Cd^2＋ , Cu^2＋ , Zn^2＋ and Ca^2＋ was investigated. The results indicate that changes in dielectric spectra reflect effects of heavy metal on the structure and function of E. coli cells. Heavy metal can change membrane capacitance as well as pennittivity and conductivity of the cytoplasm. Changes in volume fraction suggested that dielectric measurement could monitor the growth of E. coli cells. These results demonstrated that dielectric spectroscopy was a potential effective technique for studying electric properties of biological cells.

Characterization and recycling of nickel- and chromium-contained pickling sludge generated in production of stainless steel

Pickling sludge generated during the neutralization of pickling wastewater with calcium hydroxide in stainless steel pickling process was characterized using X-ray fluorescence spectrometry, X-ray diffractometry, scanning electron microscopy, thermogravimetry and differential scanning calorimetry, etc. The major compositions of pickling sludge are CaF2, CaSO4, Me（OH）, （M： Fe, Cr, Ni）, and the content of CaF2 is high in the sludge. The melting point of pickling sludge is about 1350℃ and the viscosity is about 0.14 Pa.s at 1450 ℃, which are comparatively lower than those of normal refining slag. After heat treatment, the contents of sulfur and fluorine in the pickling sludge were reduced, confirming the thermal decomposition of sulfate in the sludge. Fluorine in the sludge is reduced by the gaseous SiF4 and A1F3 generated through the reactions of CaF2 with SiO2 and Al2O3. The preliminary results from the reduction test indicate that the sulfur content in the steel is not affected by the presence of sulfur in the sludge. The recovery of nickel is about 40%, and the chromium content changes marginally due to the protective atmosphere under the reduction condition of chromic oxide. The pickling sludge is a potential auxiliary material for the production of stainless steel.

State-to-state Photoionization Dynamics of Vanadium Nitride by Two-color Laser Photoionization and Photoelectron Methods

We have conducted a two-color visible-ultraviolet （VIS-UV） resonance-enhanced laser pho- toionization and pulsed field ionization-photoelectron （PFI-PE） study of gaseous vana- dium mononitride （VN） in the total energy range of 56900-59020 cm-1. The VN molecules were selectively excited to single rotational levels of the intermediate VN（D3H0, v＇=0） state by using a VIS dye laser prior to photoionization by employing a UV laser. This two-color scheme allows the measurements of rovibronically selected and re- solved PFI-PE spectra for the VN＋（X2A; v＋=0, 1, and 2） ion vibrational bands. By simulating the rotationally resolved PFI-PE spectra, J＋=3/2 is determined to be the lowest rotational level of the ground electronic state, indicating that the symmetry of the ground VN＋ electronic state is 2A3/2. The analysis of the PFI-PE spectra for VN＋ also yields accurate values for the adiabatic ionization energy for the formation of VN＋（X2A3/2）, IE（VN）=56909.5＋0.8 cm-1 （7.05588±0.00010 eV）, the vibrational fre- quency wc＋=1068.0±0.8 cm-1, the anharmonicity constant wc＋Xe＋=5.8±0.8 cm-1, the rotational constants Be＋=0.6563±0.0005 cm-1 and ae＋=0.0069±0.0004 cm-1, and the equi-librium bond length, re＋=1.529A, for VN＋（X2A3/2）; along with the rotational constants Bc＋=0.6578i0.0028 cm-1 and a＋=0.0085±0.0028 cm-1, and the equilibrium bond length re＋=1.527A for VN＋（X2As/2）, and the spin-orbit coupling constant A=153.3±0.8 cm-1 for VN＋（X2/k5/2,3/2）. The highly precise energetic and spectroscopic data obtained in the present study are valuable for benchmarking the predictions based on state-of-the-art ab initio quantum calculations.

Optical and Electrical Properties of Sensitized Polyaniline by Electrochemical Polymerization

To sensitize polyaniline with dyes by electrochemical polymerization, HClO 4 is employed as the dopant and oxidant, and the polyaniline with different sensitive properties is synthesized. The effect of sensitized emeraldine salt on the absorption spectrum is discussed in details. The maximum conductivity of sensitized films reaches 1.22 S/cm, and investigation on dye sensitizing of the polymer reveals that C.I. Direct Blue 71, C.I. Direct Blue 84, C.I. Direct Black 19 and CuPc-(COOH) 4 may enhance the photoconductivity of polyaniline greatly.