Anatase Ti0_(2) nanosheet-based hierarchical spheres(HSs)with nearly 100%exposed{001}facets were synthesized via a facile solvothermal process.Using these hierarchical spheres as a scattering layer on nanocrystaline T...Anatase Ti0_(2) nanosheet-based hierarchical spheres(HSs)with nearly 100%exposed{001}facets were synthesized via a facile solvothermal process.Using these hierarchical spheres as a scattering layer on nanocrystaline TiO_(2)film,hi-layered dye-sensitized solar cells(DSSCs)have been fabricated by electrophoresis deposition method,which well preserved the fragile hierarchical structure.Owing to the superior dye adsorption and light scattering effect of HSs,an overall energy conversion efficiency of 7.38%is achieved,which is 26%higher than that of nanoparticle-based photoanode.展开更多
Study of electrochemical behavior of chromium （molybdenum, tungsten） and silicon containing melts allowed defining conditions for synthesis of silicides of chromium, molybdenum and tungsten in the form of fine powde...Study of electrochemical behavior of chromium （molybdenum, tungsten） and silicon containing melts allowed defining conditions for synthesis of silicides of chromium, molybdenum and tungsten in the form of fine powders by electrolysis of halide-oxide melts. Sequence of stages of electrosynthesis of silicides of molybdenum and tungsten was found as follows： deposition of more electroposifve metal （molybdenum or tungsten）, deposition of the second component （silicon） on the surface of metal deposited previously, and reaction diffusion of silicon into the deep of the metal-salt ＂pear＂ with the formation of silicide phases of different compositions up to the higher silicides. In contrast, during the electrodeposition of chromium silicides, one of the components （chromium） is deposited not in elemental form, but in oxide form, and the other （silicon） acts as a reducing agent for this oxide to form binary compounds. Duration of the synthesis first stage （deposition of refractory metal or of its oxide） depends on the refractory metal compound content in the system and on the cathode current density. Synthesis of silicides is possible due to retention of powders of molybdenum （tungsten） or chromium oxide at the cathode without scaling. Optimal values of concentrations ratio, current density, temperature, and duration of electrosynthesis were found. Phase composition of products were obtained, as well as their chemical and thermal stability, were studied.展开更多
To obtain the refined electrodeposited nickel layer on AZ91D magnesium alloy,ultrasonic technology was applied in the processes of pre-treatment and electrodeposition.The phases of pre-treatment layer and the nickel c...To obtain the refined electrodeposited nickel layer on AZ91D magnesium alloy,ultrasonic technology was applied in the processes of pre-treatment and electrodeposition.The phases of pre-treatment layer and the nickel coating were analyzed by X-ray diffractometry(XRD)and X-ray photoelectron spectroscopy(XPS),and the microstructure was observed by scanning electron microscopy(SEM).Then,the effects of ultrasonic dispersion on the microstructure of pre-treatment layer and the grain refinement of electrodeposited nickel layer were discussed.The results showed that the pre-treatment electrodeposited Cu-Sn layer with compact microstructure could be synthesized in alkaline copper-tin liquid with ultrasonic agitation,as a result,smooth and refined nickel coating formed on AZ91D magnesium alloy.On the other hand,preferred orientation in the coating decreased because of the refined grains.展开更多
文摘Anatase Ti0_(2) nanosheet-based hierarchical spheres(HSs)with nearly 100%exposed{001}facets were synthesized via a facile solvothermal process.Using these hierarchical spheres as a scattering layer on nanocrystaline TiO_(2)film,hi-layered dye-sensitized solar cells(DSSCs)have been fabricated by electrophoresis deposition method,which well preserved the fragile hierarchical structure.Owing to the superior dye adsorption and light scattering effect of HSs,an overall energy conversion efficiency of 7.38%is achieved,which is 26%higher than that of nanoparticle-based photoanode.
文摘Study of electrochemical behavior of chromium （molybdenum, tungsten） and silicon containing melts allowed defining conditions for synthesis of silicides of chromium, molybdenum and tungsten in the form of fine powders by electrolysis of halide-oxide melts. Sequence of stages of electrosynthesis of silicides of molybdenum and tungsten was found as follows： deposition of more electroposifve metal （molybdenum or tungsten）, deposition of the second component （silicon） on the surface of metal deposited previously, and reaction diffusion of silicon into the deep of the metal-salt ＂pear＂ with the formation of silicide phases of different compositions up to the higher silicides. In contrast, during the electrodeposition of chromium silicides, one of the components （chromium） is deposited not in elemental form, but in oxide form, and the other （silicon） acts as a reducing agent for this oxide to form binary compounds. Duration of the synthesis first stage （deposition of refractory metal or of its oxide） depends on the refractory metal compound content in the system and on the cathode current density. Synthesis of silicides is possible due to retention of powders of molybdenum （tungsten） or chromium oxide at the cathode without scaling. Optimal values of concentrations ratio, current density, temperature, and duration of electrosynthesis were found. Phase composition of products were obtained, as well as their chemical and thermal stability, were studied.
文摘To obtain the refined electrodeposited nickel layer on AZ91D magnesium alloy,ultrasonic technology was applied in the processes of pre-treatment and electrodeposition.The phases of pre-treatment layer and the nickel coating were analyzed by X-ray diffractometry(XRD)and X-ray photoelectron spectroscopy(XPS),and the microstructure was observed by scanning electron microscopy(SEM).Then,the effects of ultrasonic dispersion on the microstructure of pre-treatment layer and the grain refinement of electrodeposited nickel layer were discussed.The results showed that the pre-treatment electrodeposited Cu-Sn layer with compact microstructure could be synthesized in alkaline copper-tin liquid with ultrasonic agitation,as a result,smooth and refined nickel coating formed on AZ91D magnesium alloy.On the other hand,preferred orientation in the coating decreased because of the refined grains.
