Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using pote...Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.展开更多
A new-style direct drive motor with double-stator structure is proposed. The structure and principle of the permanent-magnet (PM) brushless motor are discussed. On the basis of numerical calculation, the cogging torqu...A new-style direct drive motor with double-stator structure is proposed. The structure and principle of the permanent-magnet (PM) brushless motor are discussed. On the basis of numerical calculation, the cogging torque waveforms of the prototype motor when staggering two stators are analyzed. The method that can reduce torque ripple making use of the structure features of this motor is investigated. The results of numerical calculation and experiment indicate that designing motor with this kind of structure is a good scheme for increasing the power density.展开更多
The brushless DC motor can be used in the marine electric propulsion system for its excellent control characteristics and large thrust. In order to estimate the operating performances of the brushless DC motor for the...The brushless DC motor can be used in the marine electric propulsion system for its excellent control characteristics and large thrust. In order to estimate the operating performances of the brushless DC motor for the high-power shipping during the design stage, the steady-state analysis is as important as the dynamic analysis generally. A mathematical model of the brushless DC propulsion motor is established according to the state-space method for the dynamic and steady-state performance analysis. The state-space mathematical model is a set of linear differential equations, so the steady-state currents of the armature windings can be gained directly by the symmetrical boundary conditions and the eigenvalues of the system matrix. The steady-state simulation results are compared with the dynamic ones to validate the correctness of this eigenvector method.展开更多
Authors developed a highly effective brushless DC motor with a simple operation principle. If the operation principle of the motor is simple, a drive circuit will also become simple and its production cost will be low...Authors developed a highly effective brushless DC motor with a simple operation principle. If the operation principle of the motor is simple, a drive circuit will also become simple and its production cost will be lower. From the above fact, Minato motor was noticed. In this motor, a unidirectional current flows in the electromagnets. In other words, unidirectional windings are used. In this motor, only strong repulsive force is utilized when a permanent magnet of a rotor and an electromagnet of a stator are adjacent. Hence, torque constant becomes higher and the efficiency of the motor is high. However, an effective value of the electromagnetic current increases because a large current flows in a short period. Therefore, copper loss increases and the efficiency of the motor decreases. In order to solve above defects, a new motor is proposed. From the experiment, it is clarified that the efficiency of the proposed motor is higher than that of the commercial motors.展开更多
Pulsed electrohydrodynamic printing （EHDP） is used to fabricate conductive silver patterns with micrometer resolution. The silver ink pendant experiences swelling, pulsation, and ejection under an applied pulse volt...Pulsed electrohydrodynamic printing （EHDP） is used to fabricate conductive silver patterns with micrometer resolution. The silver ink pendant experiences swelling, pulsation, and ejection under an applied pulse voltage of 20 Hz. The droplet deposi- tion frequency is equal to the applied voltage frequency so that the EHDP can deposit silver ink on demand. A low applied voltage favors uniform and non-scattering silver patterns while a high applied voltage results in ink scattering. Discrete drop- lets with 45-55 gm in diameter and continuous tracks with 60 gm in width are generated by using a ll0-i.tm-cailber nozzle. The feature size of deposited patterns is about half of the nozzle caliber, and a finer resolution can be achieved with the intro- duction of smaller nozzle calibers. Furthermore, the appropriate curing condition is investigated for sufficient combustion of ink solvent. The minimum resistivity of 3.3 gf~ cm is demonstrated for a continuous track cured at 200~C for 10 min. Eventu- ally, several passive electrical components, such as coated resistors, interdigitated capacitors （6 pF）, and spiral inductors （0.6 gH）, are successfully fabricated.展开更多
基金Project(50871044)supported by the National Natural Science Foundation of ChinaProject(2012M511207)supported by the Postdoctoral Science Foundation of ChinaProject(10122011)supported by the Science Research Foundation of Wuhan Institute Technology,China
文摘Effect of direct current electric field （DCEF） on corrosion behaviour of copper printed circuit board （PCB-Cu）, Cl-ion migration behaviour, dendrites growth under thin electrolyte layer was investigated using potentiodynamic polarization and scanning electron microscopy （SEM） with energy dispersive spectrometer （EDS）. Results indicate that DCEF decreases the corrosion of PCB-Cu;Cl-ions directionally migrate from the negative pole to the positive pole, and enrich on the surface of the positive pole, which causes serious localized corrosion; dendrites grow on the surface of the negative pole, and the rate and scale of dendrite growth become faster and greater with the increase of external voltage and exposure time, respectively.
文摘A new-style direct drive motor with double-stator structure is proposed. The structure and principle of the permanent-magnet (PM) brushless motor are discussed. On the basis of numerical calculation, the cogging torque waveforms of the prototype motor when staggering two stators are analyzed. The method that can reduce torque ripple making use of the structure features of this motor is investigated. The results of numerical calculation and experiment indicate that designing motor with this kind of structure is a good scheme for increasing the power density.
文摘The brushless DC motor can be used in the marine electric propulsion system for its excellent control characteristics and large thrust. In order to estimate the operating performances of the brushless DC motor for the high-power shipping during the design stage, the steady-state analysis is as important as the dynamic analysis generally. A mathematical model of the brushless DC propulsion motor is established according to the state-space method for the dynamic and steady-state performance analysis. The state-space mathematical model is a set of linear differential equations, so the steady-state currents of the armature windings can be gained directly by the symmetrical boundary conditions and the eigenvalues of the system matrix. The steady-state simulation results are compared with the dynamic ones to validate the correctness of this eigenvector method.
文摘Authors developed a highly effective brushless DC motor with a simple operation principle. If the operation principle of the motor is simple, a drive circuit will also become simple and its production cost will be lower. From the above fact, Minato motor was noticed. In this motor, a unidirectional current flows in the electromagnets. In other words, unidirectional windings are used. In this motor, only strong repulsive force is utilized when a permanent magnet of a rotor and an electromagnet of a stator are adjacent. Hence, torque constant becomes higher and the efficiency of the motor is high. However, an effective value of the electromagnetic current increases because a large current flows in a short period. Therefore, copper loss increases and the efficiency of the motor decreases. In order to solve above defects, a new motor is proposed. From the experiment, it is clarified that the efficiency of the proposed motor is higher than that of the commercial motors.
基金supported by the National Natural Science Foundation of China (Grant No. 51035002)the Key Project of Chinese Ministry of Edu-cation (Grant No. 708055)the Fundamental Research Funds for the Central Universities (Grant No. 2010121039)
文摘Pulsed electrohydrodynamic printing （EHDP） is used to fabricate conductive silver patterns with micrometer resolution. The silver ink pendant experiences swelling, pulsation, and ejection under an applied pulse voltage of 20 Hz. The droplet deposi- tion frequency is equal to the applied voltage frequency so that the EHDP can deposit silver ink on demand. A low applied voltage favors uniform and non-scattering silver patterns while a high applied voltage results in ink scattering. Discrete drop- lets with 45-55 gm in diameter and continuous tracks with 60 gm in width are generated by using a ll0-i.tm-cailber nozzle. The feature size of deposited patterns is about half of the nozzle caliber, and a finer resolution can be achieved with the intro- duction of smaller nozzle calibers. Furthermore, the appropriate curing condition is investigated for sufficient combustion of ink solvent. The minimum resistivity of 3.3 gf~ cm is demonstrated for a continuous track cured at 200~C for 10 min. Eventu- ally, several passive electrical components, such as coated resistors, interdigitated capacitors （6 pF）, and spiral inductors （0.6 gH）, are successfully fabricated.
