期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
UPS电源在广播发射台站的选用与保养 被引量:1
1
作者 顾惠先 《西部广播电视》 2016年第12期235-235,237,共2页
近年来,我国广播电视事业快速发展,同时对其播出信号质量提出了更高的要求,当市电出现异常时,就会影响到广播发射机房正常运行,有时还会造成机器的故障发生,为了保障机器的正常工作运行,我们需要提高电源的不间断性和安全性,因此,为台... 近年来,我国广播电视事业快速发展,同时对其播出信号质量提出了更高的要求,当市电出现异常时,就会影响到广播发射机房正常运行,有时还会造成机器的故障发生,为了保障机器的正常工作运行,我们需要提高电源的不间断性和安全性,因此,为台站发射机加装UPS电源是很有必要的。本文就发射机房台站加装UPS电源和常用维护方法发表下自己的看法。 展开更多
关键词 电力断电 切换 UPS
下载PDF
On-Line Broken-Bar Fault Diagnosis System of Induction Motor 被引量:2
2
作者 张荣 王秀和 《Transactions of Tianjin University》 EI CAS 2008年第2期144-147,共4页
Induction motor faults including mechanical and electrical faults are reviewed.The fault diagnosis methods are summarized.To analyze the influence of stator current,torque,speed and rotor current on faulted bars,a tim... Induction motor faults including mechanical and electrical faults are reviewed.The fault diagnosis methods are summarized.To analyze the influence of stator current,torque,speed and rotor current on faulted bars,a time-stepping transient finite element(FE)model of induction motor with bars faulted is created in this paper.With wavelet package analysis method and FFT method, the simulation result of finite element is analyzed.Based on the simulation analysis,the on-line fault diagnosis system of induction motor with bars faulted is developed.With the speed of broken bars motor changed from 1 478 r/min to 1 445 r/min,the FFT power spectra and the wavelet package decoupling factors are given.The comparison result shows that the on-line diagnosis system can detect broken-bar fault efficiently. 展开更多
关键词 induction motor fault diagnosis finite element method broken-bar
下载PDF
Crack initiation rate of brittle rock under thermal-hydro-mechanical coupling condition 被引量:2
3
作者 Zhuo LI Qiu-hua RAO +1 位作者 Peng LI Wei YI 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2018年第10期2107-2113,共7页
A calculation formula of thermal-hydro-mechanical(THM)coupling crack initiation rate for brittle rock was derived based on the energy conservation law.The self-designed THM coupling fracture test with conductive adhe... A calculation formula of thermal-hydro-mechanical(THM)coupling crack initiation rate for brittle rock was derived based on the energy conservation law.The self-designed THM coupling fracture test with conductive adhesive electrical measurement method was applied to measuring the THM coupling crack propagation rate of brittle rock continuously.Research results show that both calculation and test results of crack initiation rate increased with increase of the temperature and the hydraulic pressure.They are almost in good agreement,which can prove validity of the calculation formula of THM coupling crack initiation rate. 展开更多
关键词 crack initiation rate thermal-hydro-mechanical coupling test conductive adhesive electrical method fracture mechanism brittle rock
下载PDF
An Ensemble Application of Conflict-Resolving ART-Based Neural Networks to Fault Detection and Diagnosis 被引量:1
4
作者 Shing-chiang TAN Chee-peng LIM 《Journal of Measurement Science and Instrumentation》 CAS 2011年第4期371-377,共7页
Accurate fault detection and diagnosis is important for secure and profitable operation of modern power systems.In this paper,an ensemble of conflict-resolving Fuzzy ARTMAP classifiers,known as Probabilistic Multiple ... Accurate fault detection and diagnosis is important for secure and profitable operation of modern power systems.In this paper,an ensemble of conflict-resolving Fuzzy ARTMAP classifiers,known as Probabilistic Multiple Fuzzy ARTMAP with Dynamic Decay Adjustment(PMFAMDDA),for accurate discrimination between normal and faulty operating conditions of a Circulating Water(CW)system in a power generation plant is proposed.The decisions of PMFAMDDA are reached through a probabilistic plurality voting strategy that is in agreement with the Bayesian theorem.The results of the proposed PMFAMDDA model are compared with those from an ensemble of Probabilistic Multiple Fuzzy ARTMAP(PMFAM)classifiers.The outcomes reveal that PMFAMDDA,in general,outperforms PMFAM in discriminating operating conditions of the CW system. 展开更多
关键词 fault detection and diagnosis fuzzy ARTMAP dynamic decay adjustment algorithm pluralityvoting circulating water system
下载PDF
State of the Art and Future Trends of Unconventional PD-Measurement at Power Transformers 被引量:1
5
作者 Jurgen Fabian Martin Neuwersch +2 位作者 Christof Sumereder Michael Muhr Robert Schwarz 《Journal of Energy and Power Engineering》 2014年第6期1093-1098,共6页
This paper discusses the current state of the art of diagnostics at power transformers. A special focus is set on the UHF-PD-measurement (ultra-high-frequency partial discharge measurement) because at power transfor... This paper discusses the current state of the art of diagnostics at power transformers. A special focus is set on the UHF-PD-measurement (ultra-high-frequency partial discharge measurement) because at power transformers, this diagnostic method has become more important in recent years. The current state, basics and principles of operations, proceedings as well as advantages of PD-measurement methods are covered. Furthermore problems and proposed solutions are discussed. Bushings and tap changers are not discussed in detail. In many cases, one single diagnostic method does not have the ability to sufficiently evaluate a power transformer. Therefore, a variety of diagnostic methods came up over times, which are commonly used by now. To expand the evaluation opportunities of power transformers, science strives to develop new diagnostic methods as well as to improve the existing ones. Furthermore, environmentally friendly and hardly inflammable ester liquids are examined for the use at power transformers and PD-measurement at HVDC (high voltage direct current) converter transformers as well. Potential diagnostic options and respectively current developments and findings in the field of oil-paper-insulation systems are outlined conclusively. 展开更多
关键词 Power transformer unconventional PD-measurement UHF-PD-measurement environmentally friendly alternativeinsulating liquids HVDC converter transformer.
下载PDF
Influence of DFIG Wind Turbine Protection and Control during Voltage Dip on Circuit Breaker Operation
6
作者 Anssi Salomo Makinen Ontrei Raipala Sami Repo Heikki Tuusa 《Journal of Energy and Power Engineering》 2013年第1期126-138,共13页
This paper analyzes a DFIG (doubly fed induction generator) WT (wind turbine) fault current after a symmetrical network voltage dip. The goal is to identify the factors determining how fast the first zero crossing... This paper analyzes a DFIG (doubly fed induction generator) WT (wind turbine) fault current after a symmetrical network voltage dip. The goal is to identify the factors determining how fast the first zero crossings of the fault current occur. This is an important subject because the ftmdamental property of the CB (circuit breaker) is that it breaks the current when the current is very near zero. The study was conducted using a hardware-in-the-loop test environment constructed using two real time simulators (dSPACE and RTDS) and a commercial protection relay. It is found that the reactive current injection during a voltage dip demanded by the grid codes enhances the operation of the WT protection because the zero crossings of the currents through CB are attained earlier. In addition, the size of the crowbar resistance has a significant influence on the zero crossings. 展开更多
关键词 DFIG reactive current circuit breaker loss of mains relay protection.
下载PDF
Effect of electrostatic tractions on the fracture behavior of a dielectric material under mechanical and/or electric loading
7
作者 ZHANG TongYi XIE Tao 《Science China(Technological Sciences)》 SCIE EI CAS 2012年第9期2391-2403,共13页
The effect of electrostatic tractions on the fracture behavior of a dielectric material under mechanical and/or electric loading is analyzed,by studying a pre-cracked parallel-plate capacitor,and illustrated by plots.... The effect of electrostatic tractions on the fracture behavior of a dielectric material under mechanical and/or electric loading is analyzed,by studying a pre-cracked parallel-plate capacitor,and illustrated by plots.The results indicate that electrostatic tractions on the electrodes compress the material in front of the crack tip,while electrostatic tractions on the crack faces have the tendency to close the crack and stretch the material behind the crack tip.Mechanical load is the driving force to propagate the crack,while applied electric field retards crack propagation due to the electrostatic tractions.As a direct consequence,the fracture criterion is composed of two parts:the energy release rate must exceed a critical value and the mechanical load must be higher than the critical value for crack opening. 展开更多
关键词 electrostatic traction FRACTURE dielectric materials combined mechanical and electrical loading energy release rate
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部