小学数学教学中培养学生兴趣尝试

兴趣是学习的不竭动力。在小学数学教学中如何培养学生的学习兴趣呢？创设教学情境，诱发学生兴趣；巧设课始导语，引起学生兴趣；引导动手操作，培养学生兴趣；运用电化教学，激发学生兴趣；通过教学总结，巩固学生兴趣都是行之有效的。

普通物理教学中形象化教具的应用

当前,各院校都在进行教学改革,而教学手段的改革又是教改的重点之一.在普通物理教学中,笔者通过近年来教学实践,在教学过程中大量使用形象化教具与现代化教学手段相结合,进行了教学手段改革的尝试,取得了比较好的教学效果.以下结合'刚体转动'这一章的教学内容谈谈笔者的一些作法与体会.1 课堂教学中应用形象化教具的特点形象化教具主要指在课堂教学中使用演示器材、模型、挂图、幻灯。

Electrochemical and corrosion behaviors of pure Mg in neutral 1.0% NaCl solution

The corrosion behaviors and corresponding electrochemical impedance spectroscopy（EIS） and polarization curves of pure Mg in neutral 1.0% NaCl solution were investigated.The fractal dimension of EIS at different time was studied.The corrosion process and EIS evolution are divided into three stages.In the initial stage,EIS is composed of two overlapped capacitive arcs,the polarization resistance and charge transfer resistance increase rapidly with immersion time,and the corrosion rate decreases.Then,two well-defined capacitive arcs appear,and the charge transfer resistance and corrosion rate remain stable.After a long immersion time,inductive component appears in a low frequency range,the charge transfer resistance decreases and the corrosion rate increases with the immersion time.The fractal dimension obtained from the time records of EIS seems to be a promising tool for the analysis of corrosion morphology because of its direct relationship with the metal surface.

Characterization of pitting corrosion of 7A60 aluminum alloy by EN and EIS techniques

The pitting corrosion behaviors of 7A60 aluminum alloy in the retrogression and re-aging （RRA） temper were investigated by electrochemical impedance spectroscopy （EIS） and electrochemical noise （EN） techniques, and the microstructure and the second phase content of the alloy were observed and determined by scanning electron microscopy （SEM） and energy dispersive spectrometer （EDS）. The results show that there exist two different corrosion stages for 7A60 alloy in 3.5%NaCl solution, and the corrosion process can be detected by the appearance of EIS spectrum with two capacitive time constants and the wavelet fractal dimension D extracted from EN. SEM and EDS results also demonstrate that severe pitting corrosion in 7A60 alloy is mainly caused by electrochemical active MgZn2 particles, secondly by Al2MgCu and Mg2Si. Al7Cu2Fe particles make little contribution to the pitting corrosion of 7A60 alloy.

Effect of ultrasonic on structure and electrochemical performance of α-Ni(OH)_2 electrodes

Al/Co co-doped α-Ni（OH）2 samples were prepared by either ultrasonic co-precipitation method （Sample B） or co-precipitation method （Sample A）. The crystal structure and particle size distribution of the prepared samples were examined by X-ray diffraction （XRD） and laser particle size analyzer, respectively. The results show that Sample B has more crystalline defects and smaller average diameter than Sample A. The cyclic voltammetry and electrochemical impedance spectroscopy measurements indicate that Sample B has better electrochemical performance than Sample A, such as better reaction reversibility, lower charge-transfer resistance and better cyclic stability. Proton diffusion coefficient of Sample B is 1.96×10-10cm2/s, which is two times as large as that （9.78×10-11cm2/s） of Sample A. The charge-discharge tests show that the discharge capacity （308 mA·h/g） of Sample B is 25 mA·h/g higher than that of Sample A （283 mA·h/g）.

Calculation of electron structure by density function theory and electrochemical process of surface (100) of FeS_2

The electron structure of FeS2 surface （100） was computed by DFT （density function theory） and the process of electron transfer in sulfide flotation was simulated through ab-initio calculation. The results show that the interaction between xanthate and FeS2 is controlled by the energy of valence band. The products and degree of the reaction depend on the density of state of valence band and concentration election structure on the surface of of positive hole in valence band. Interaction between xanthate and pyrite can be changed by modifying the of the surface of pyrite. Xanthate is adsorbed on the surface of intrinsic pyrite. But the amount of xanthate adsorbed the pyrite with sulfur vacancy is more than that on the surface of the intrinsic pyrite due to the higher electron and vacancy density. Xanthate is not adsorbed on the surface of pyrite with Fe vacancy because of its high Fermi energy

Analytical Dielectric Spectrum Formula Based on Representative Frequencies

According to experimental data available for the complex refractive index of particular dielectrics, a dielectric spectrum formula is proposed by the least square fitting technique combined with selected natural frequencies. From the dielectric spectrum formula, the spectra of optical and dielectric constants can be obtained in the whole frequency region. Three dielectrics, water, ethanol, and toluene, are taken as examples. In the region where the ex- perimental data are available, the spectra of the optical constants calculated by the formula are in good agreement with the real refractive spectrum obtained by Kramers-Kronig （K-K） transform and the experimental imaginary refractive spectrum. In the region where no ex- perimental data are available, the extrapolation of our formula can make predictions. The merits of the present treatment are that we are able to get the uniform spectrum formula, without splitting into different frequency sections, and the analytical form of the dielectric spectra will be useful in the theoretical description of solvation dynamics.

Control of repair effect and hydrogen embrittlement risk by parameters optimization for BIEM

Bidirectional electromigration rehabilitation(BIEM)is a novel electrochemical rehabilitation method involving the injection of inhibitors into steel bar surface.The BIEM effect and hydrogen embrittlement(HE)risk depend on the electrochemical parameters(current density and duration)and operating condition(stress level and concrete cover thickness)of reinforced concrete structures.Experiments were performed in this study to investigate the relationships between the aforementioned factors.For a small current density group,a linear relationship was established between electric flux and chloride extraction.For a large current density group,the reasonable current density,stress level,and treatment time were obtained.Finally,the querying method of electrochemical parameters combined with treatment time and current density was proposed.

Electrode models in electrical impedance tomography

This paper presents different views on electrode modelling, which include electrode electrochemistry models for modelling the effects of electrode-electrolyte interface, electric field electrode models for modelling electrode geometry, and electrode models for modelling the effects of electrode common mode voltage and double layer capacitance. Taking the full electrode models into consideration in electrical impedance tomography (EIT) will greatly help the optimised approach to a good solution and further understanding of the measurement principle.

Influence of chloride ion concentration on initial corrosion of AZ63 magnesium alloy

The initial corrosion behavior of AZ63 magnesium alloy was investigated in 1,3,5 and 7 wt.%NaCl solutions by means of corrosion potential,linear polarization,electrochemical impedance spectroscopy,and polarization measurements,during exposure in the corrosion media.Results show that the increase in chloride concentration provokes an increase in the corrosion rate.Based on the obtained kinetics parameters the mechanisms of anodic dissolution and hydrogen evolution reactions were discussed,and kinetic models were proposed.It is concluded that anodic dissolution proceeds under Temkin conditions and hydrogen evolution reaction depends on the surface coverage of Mg(OH);species.

Degradation Process of Coated Tinplate by Phase Space Reconstruction Theory

The degradation process of organosol coated tinplate in beverage was investigated by electrochemical noise (EN) technique combined with morphology characterization.EN data were analyzed using phase space reconstruction theory.With the correlation dimensions obtained from the phase space reconstruction,the chaotic behavior of EN was quantitatively evaluated.The results show that both electrochemical potential noise (EPN) and electrochemical current noise (ECN) have chaotic properties.The correlation dimensions of EPN increase with corrosion extent,while those of ECN seem nearly unchanged.The increased correlation dimensions of EPN during the degradation process are associated with the increased susceptibility to local corrosion.

Optimization of parameters, characterization and thermal property analysis of hafnium ethoxide synthesized by electrochemical method

Hafnium ethoxide was synthesized using electrochemical method.Optimization experiments were used to optimizevarious parameters namely Et4NBr concentration(c):0.01?0.06mol/L,solution temperature(t):30?78°C,polar distance(D):2.0?4.0cm and current density(J):100?400A/m2.The electrolytic products obtained under optimum conditions of c=0.04mol/L,t=78°C,D=2.0cm and J=100A/m2were further isolated by vacuum distillation under5kPa.The product was characterized byFourier transform infrared(FT-IR)spectra,nuclear magnetic resonance(NMR)spectra.The results indicated that the product washafnium ethoxide.ICP analysis suggested that the content of hafnium ethoxide in the final product exceeded99.997%.Thermalproperties of the product were analyzed by TG/DTG.The vaporization enthalpy of hafnium ethoxide was found to be79.1kJ/mol.The result confirmed that hafnium ethoxide was suitable for the preparation of hafnium oxide by atomic layer deposition.

Geometric Design of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells by Multiphysics Simulations

High volumetric power density （VPD） is the basis for the commercial success of micro-tubular solid oxide fuel cells （mtSOFCs）. To find maximal VPD （MVPD） for anode-supported mtSOFC （as-mtSOFC）, the effects of geometric parameters on VPD are analyzed and the anode thickness, tan, and the cathode length, lea, are identified as the key design parameters. Thermo-fluid electrochemical models were built to examine the dependence of the electrical output on the cell parameters. The multiphysics model is validated by reproducing the experimental I-V curves with no adjustable parameters. The optimal lea and the corresponding MVPDs are then determined by the multiphysics model for 20 combinations of rin, the inner tube radius, and tan. And all these optimization are made at 1073.15 K. The results show that： （i） significant performance improvement may be achieved by geometry optimization, （ii） the seemingly high MVPD of 11 and 14 W/cm^3 can be easily realized for as-mtSOFC with single- and double-terminal anode current collection, respectively. Moreover, the variation of the area specific power density with/cac（2 mm, 40 mm） is determined for three representative （tin, tan） combinations. Besides, it is demonstrated that the current output of mtSOFC with proper geometric parameters is comparable to that of planar SOFC.

Synthesis and thermoelectric properties of Mg_2Si_(1-x)Sn_x solid solutions by microwave irradiation

In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx （x=0.2, 0.4, 0.6, 0.8） solid solutions, microwave irradiation techniques were used in preparing them as thermoelectric materials. Structure and phase composition of the obtained materials were investigated by X-ray diffraction （XRD）. The electrical conductivity, Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 750 K. It is found that Mg2Si1-xSnx solid solutions are well formed with excessive content of 5% （molar fraction） Mg from the stoichiometric MgESil.xSnx under microwave irradiation. A maximum dimensionless figure of merit, ZT, of about 0.26 is obtained for Mg2Si1-xSnx solid solutions at about 500 K for x=0.6.

Electrochemical behavior of diverse vanadium ions at modified graphite felt electrode in sulphuric solution

PAN-based graphite felt （PGF） treated in 98% sulphuric acid for 5 h and then kept at 450 ℃ for 2 h was evaluated for their electrochemical performance as electrodes of vanadium redox battery （VRB）. Structure and characteristic of treated PAN-based graphite felt （TPGF） were determined by means of Fourier Transform Infi-ared Spectroscopy, Scanning Electron Microscopy, Brunauer-Emmett-Teller surface area analysis and VRB test system. The results show that the acid and heat synergistic effect increase the number of --COOH functional groups on the PGF surface, and the PGF is eroded by sulphuric acid oxidation, resulting in the surface area increases from 0.31 m^2/g to 0.45 m^2/g. The V（ Ⅱ ）/V（Ⅲ） redox reaction is electrochemically reversible on the TPGF electrode, while the V（Ⅳ）/V（Ⅴ） couple is a quasi reversible process. The diffusion coefficients of the oxidation for V（Ⅳ）/V（Ⅴ） obtained from the scope of peak current Ip vs scan rate v^1/2 is 4.4×10^-5 cm^2/s. The improvement of electrochemical activity for the electrode is mainly ascribed to the increase of the number of ---COOH groups on the TPGF, which behaves as active sites catalyzing the vanadium species reactions and accelerating electron transfer reaction and oxygen transfer.

Electrochemistry of aristolochic acid interacting with guanine

Interaction of Aristolochic acid （AA） and guanine （G） was studied by electrochemical techniques in this paper. When AA was added into the guanine solution, the oxidation peak currents of mixture solution decreased, while the peak potential and the electrochemical kinetic parameters remained the same as when AA was absent, except that the electrode process of guanine that involved two protons and two electrons changed from adsorption controlled to diffusion controlled. It is suggested that an electrochemical inactive supramolecular adduct AA-Gua （1：1） was formed in the system. The adduct cannot be oxidized on the glassy carbon electrode, which indirectly results in the decrease of the free concentration of guanine in the reaction solution and the decrease of peak currents. The binding constant （13） of this adduct is calculated as 7.14× 10^3 mol/L. The possible mechanism for the interaction of Aristolochic acid and DNA was proposed, that may provide a possible pathway for the nosogenesis research of aristolochic acid.

The Marine Dynamics and Changing Trend off the Modern Yellow River Mouth

Topography around the Yellow River mouth has changed greatly in recent years, but studies on the current state of ma- rine dynamics off the Yellow River mouth are relatively scarce. This paper uses a two-dimension numerical model （MIKE 21） to reveal the tidal and wave dynamics in 2012, and conducts comparative analysis of the changes from 1996 to 2012. The results show that M2 amphidromic point moved southeastward by 11 kin. It further reveals that the tides around the Yellow River mouth are relatively stable due to the small variations in the tidal constituents. Over the study period, there is no noticeable change in the distribution of tidal types and tidal range, and the mean tidal range off the river mouth during the period studied is 0.5-1.1 m. However, the tidal currents changed greatly due to large change in topography. It is observed that the area with strong tidal currents shifted from the old river mouth （1976-1996） to the modem river mouth （1996-present）. While the tidal current speeds decreased continually off the old river mouth, they increased off the modem river mouth. The Maximum Tidal Current Speed （MTCS） reached 1.4 m s-1, and the maximum current speed of 50-year return period reached 2.8 m s-1. Waves also changed greatly due to change in topography. The significant wave height （H1/3） of 50-year return period changed proportionately with the water depth, and the ratio of Hi/3 to depth being 0.4-0.6. H1/3 of the 50-year return period in erosion zone increased continually with increasing water depth, and the rate of change varied between 0.06 and 0.07myr-1. Based on the results of this study, we infer that in the future, the modem river mouth will protrude gradually northward, while the erosion zone, comprising the old river mouth and area between the modern river mouth and the old river mouth （Intermediate region） will continue to erode. As the modem river mouth protrudes towards the sea, there will be a gradual increase in the current speed and decrease in wave height. Conversely, the old river mouth will retreat, with gradual decrease in current speed and increase in wave height. As more coastal constructions spring up around the Yellow River mouth in the future, we recommend that variation in hydrodynamics over time should be taken into consideration when designing such coastal constructions.

Microstructure characterization and electrochemical corrosion behavior of Zn and Zn/Mg alloys in H_2SO_4 solution

The three systems of pure Zn, Zn-0.10% Mg(mass fraction), and Zn-0.15% Mg(mass fraction) were cast under controlled atmosphere and their microstructures were characterized by SEM/EDS analysis. The electrochemical corrosion behavior of these three samples was examined in the very aggressive solution of 50% H2SO4(mass fraction) using electrochemical impedance spectroscopy(EIS) and potentiodynamic polarization measurements. The results show that magnesium improves in some extent the corrosion resistance of pure Zn in 50% H2SO4(mass fraction) confirmed by EIS test. Results of polarization measurment also demonstrate that small amount of Mg significantly improves the passivation of Zn in the test solution. Results of surface morphology of the samples and EDS analysis reveal that Mg reduced the corrosion attacks to pure Zn.

The Implementation and Evaluation of Training Course for Chinese as Second Language E-Teacher

In this study, we made references to past literatures and developed an e-learning training program for CSL （Chinese as a Second Language） teachers. The class was held from July to August, 2010, in Chinese Culture University （Taiwan）, and we designed a performance-evaluation questionnaire with the Delphi method. Three months after the training program was completed, the questionnaire was given to the 30 students of the class, and they were asked to answer questions regarding their use of e-learning in the actual practice. We also asked 5 teachers to conduct experimental e-learning for us to video-record and observe. This effort allows us to discuss the use of e-learning among CSL teachers in Taiwan, come up with a conclusion and suggestions, and use the findings as references for course-planning and policies or research regarding the digital learning of Chinese.

Determination of consolidation behaviour of clay slurries

The main objective of this study was to determine the consolidation behaviour of clay slurries.A finegrained clay with high consistency limits(W_L = 180%,w_P= 120%) was investigated using conventional oedometer and bench-top centrifuge tests.Results indicated that the slurry had an apparent preconsolidation(due to initial conditions,electrochemical interactions,tortuous drainage,and thixotropic strength) from e = 5.7 to e = 5.5 followed by virgin compression.Likewise,the low hydraulic conductivity(10^(-10)-10^(-12) m/s) was due to low porosity(small pore throats) and high tortuosity(long flow paths).Unlike consolidation of soils,the c_v and m_v decreased with increasing σ' but increased with increasing e and k.The data from the two tests correlated well in the range of σ' = 10-65 kPa,e = 5.5-3.86,k= 1.7 × 10^(-10)-5×10^(-11) m/s,F_c = 1-40 MN.New equations were developed to correlate the consolidation parameters(e,σ',k) with F_c.The deviation of k beyond 40 MN(e = 4.65) was due to deviation from the initial straight line portion of the settlement curve in the centrifuge test.