To reduce output voltage noise and improve dynamic response performance,this study designed a buck converter on the basis of secondary filters and adaptive voltage positioning(AVP).A hybrid control method was proposed...To reduce output voltage noise and improve dynamic response performance,this study designed a buck converter on the basis of secondary filters and adaptive voltage positioning(AVP).A hybrid control method was proposed for the compensation of the secondary filter.The introduction of a high-frequency feedback path,in addition to the traditional feedback path,effectively improved the influence of the secondary filter on the loop stability and direct current regulation performance.A small-signal model of the buck converter based on the proposed control method was derived,and the stability and selection of control parameters were analyzed.AVP is realized using an easy-to-implement and low-cost control method that was proposed to improve dynamic response performance by changing the low-frequency gain of the control loop and load regulation of the output voltage.The experimental results of the buck converter showed that the proposed method effectively reduced the output voltage noise by 50%and improved the dynamic response capability to meet the target requirements of mainstream electronic systems.展开更多
To extend the operating speed range of a conventional configuration of FESS （flywheel energy storage system）, an additional DC-DC boost converter is required between the machine and grid side converters to regulate ...To extend the operating speed range of a conventional configuration of FESS （flywheel energy storage system）, an additional DC-DC boost converter is required between the machine and grid side converters to regulate the output voltage. This paper presents a new FESS based on three-phase boost inverter topology. The proposed system facilitates voltage boost capability directly in a single-stage. The main advantage of the three-phase boost inverter is the deployment of only six switches and undersized passive elements to obtain a boosted AC output voltage weighed against the input DC supply. In this paper, FESS based on boost inverter topology is modeled and simulated using MATLAB/S1MULINK. An experimental setup has been built for the three-phase boost inverter to present its boosting capability. The simulation and experimental results sustain the proposed configuration.展开更多
文摘To reduce output voltage noise and improve dynamic response performance,this study designed a buck converter on the basis of secondary filters and adaptive voltage positioning(AVP).A hybrid control method was proposed for the compensation of the secondary filter.The introduction of a high-frequency feedback path,in addition to the traditional feedback path,effectively improved the influence of the secondary filter on the loop stability and direct current regulation performance.A small-signal model of the buck converter based on the proposed control method was derived,and the stability and selection of control parameters were analyzed.AVP is realized using an easy-to-implement and low-cost control method that was proposed to improve dynamic response performance by changing the low-frequency gain of the control loop and load regulation of the output voltage.The experimental results of the buck converter showed that the proposed method effectively reduced the output voltage noise by 50%and improved the dynamic response capability to meet the target requirements of mainstream electronic systems.
文摘To extend the operating speed range of a conventional configuration of FESS （flywheel energy storage system）, an additional DC-DC boost converter is required between the machine and grid side converters to regulate the output voltage. This paper presents a new FESS based on three-phase boost inverter topology. The proposed system facilitates voltage boost capability directly in a single-stage. The main advantage of the three-phase boost inverter is the deployment of only six switches and undersized passive elements to obtain a boosted AC output voltage weighed against the input DC supply. In this paper, FESS based on boost inverter topology is modeled and simulated using MATLAB/S1MULINK. An experimental setup has been built for the three-phase boost inverter to present its boosting capability. The simulation and experimental results sustain the proposed configuration.
