不接地电压互感器一、二次绕组间电场强度计算及主绝缘厚度设计

1前言 不接地电压互感器一、二次绕组间的主绝缘要承受全部的工频试验电压,那么,其主绝缘厚度应怎样定位才能使产品不至于耐压击穿？

基于里德堡原子的电场测量

里德堡原子具有大的极化率、低的场电离阈值和大的电偶极矩,对外部电磁场十分敏感,可以用来测量电场强度特别是微波电场的强度.利用里德堡原子的量子干涉效应(电磁诱导透明和Autler-Townes效应)测量微波电场强度的灵敏度远高于传统采用偶极天线测量微波电场的灵敏度.此外,里德堡原子电场计可以溯源到标准物理量,不需要额外校准;采用玻璃探头,对待测电场干扰少;灵敏度也不依赖于探头的物理尺寸.同时,该电场计还可以实现对微波电场的偏振方向的测量,实现亚波长和近场区域电场成像与测量.通过选择不同的里德堡能级,可以实现1—500 GHz超宽频段范围内微波电场强度的测量.主要综述基于里德堡原子的电场精密测量研究,详细介绍了里德堡原子电场计的原理与实验进展,并简单讨论了其发展方向.

原子微波测量技术

近年来,基于原子精密谱的微波测量引起了极大关注,由此诞生了原子微波电场计、原子微波磁场计和原子微波功率标准等。原子微波探测技术是一种本质上的新技术,它把微波场强通过基本物理常量与拉比频率直接联系起来,进而实现电磁量的国际单位制溯源。这种新型微波测量技术的最大优势在于不需要校准,且其理论测量准确度远高于传统电子微波测量技术。主要综述了基于不同量子理论的微波场测量技术的基本原理、测量方法和研究现状,并简要地讨论了其未来发展方向。

金刚石氮空位色心自旋传感技术

金刚石氮空位(NV)色心具有优异的室温量子特性、长相干时间、兼容微纳加工等优势,成为芯片化高精度传感器技术领域发展的新方向。基于金刚石NV色心量子效应的磁、电、温、角速度等多种物理量传感灵敏度已逐渐突破现有传感测量技术极限,在航空航天、深空探测、生命科学等学科领域应用越来越深入。本综述主要介绍金刚石NV色心量子传感机理、不同物理量传感器研究进展及未来发展趋势。

Finite element solution based on fast numerical technique for large-scale electromagnetic computation

A numerical technique of the target-region locating （TRL） solver in conjunction with the wave-front method is presented for the application of the finite element method （FEM） for 3-D electromagnetic computation. First, the principle of TRL technique is described. Then, the availability of TRL solver for nonlinear application is particularly discussed demonstrating that this solver can be easily used while still remaining great efficiency. The implementation on how to apply this technique in FEM based on magnetic vector potential （MVP） is also introduced. Finally, a numerical example of 3-D magnetostatic modeling using the TRL solver and FEMLAB is given. It shows that a huge computer resource can be saved by employing the new solver.

An Analytical Model for the Surface Electrical Field Distribution and Optimization of Bulk-Silicon Double RESURF Devices

A new 2D analytical model for the surface electrical field distribution and optimization of bulk-silicon double RESURF devices is presented. Based on the solution to the 2D Poisson＇s equation, the model gives the influence on the surface electrical field of the drain bias and structure parameters such as the doping concentration,the depth and the position of the p-top region, the thickness and the doping concentration of the drift region, and the substrate doping concentration. The dependence of breakdown voltage on the length and doping concentration of the drift region is also calculated. Further more,an effective way to gain the optimum high-voltage is also proposed. All analytical results are verified by simulation results obtained by MEDICI and previous experimental data,showing the validity of the model presented here.

Electromagnetic simulation and experimental analysis of microwave heaters for asphalt pavements

In order to study the thermoelectric efficiency of microwave heating and reproduction of asphalt pavements and the uniformity of reproduction temperature distribution, a waveguide excitation cavity is designed and applied to the structural design of a microwave heater. The structural sizes of the incentive cavities are determined based on the waveguide transmission line theory. Using IE3D software, electromagnetic simulations are respectively carried out in four different situations, including the distances between the magnetron probes （antennas） and a short-circuit board, different horn electric lengths and aperture sizes, different dielectric properties of the asphalt mixture, and the distances between the asphalt surface and the mouth cavity. The results show that, when the distance between the magnetron probe and the short-circuit board is 32.5 ram, it is the best installation site; reduction of aerial length is the main factor in improving the heating uniformity. When the aggregate is limestone, the best heating effect can be produced. Maximum radiation efficiency can be realized by adjusting the space between the heater radiation port and the asphalt pavement. The experimental results of asphalt mixture heating in four different situations have a substantial agreement with the simulation results, which confirms that the developed microwave heater can achieve better impedance matching, thus improving the quality and efficiency of heating regeneration.

A Novel Analytical Model for Surface Electrical Field Distribution and Optimization of TFSOI RESURF Devices

A novel analytical model for the thin film silicon on insulator (TFSOI) reduced surface field (RESURF) devices has been proposed.Based on the 2-D Poisson equation solution,the analytical expressions for the surface potential and field distributions are derived.From this analysis,the optimum design condition for the maximum breakdown voltage is obtained.The dependence of the maximum breakdown voltage on the drift region length is examined and the relationship between the critical doping concentration and the front- and back- interface oxide layer thickness is discussed.The numerical simulation performed by the advanced semiconductor simulation tool,DESSIS-ISE,has been shown to support the analytical results.

Resistance optimization of flexes in aluminum reduction cells

The resistance arrangements of the flexes connecting with the cathode bus bar in aluminum reduction cells were generalized as three modes. In each mode the universal method to select proper resistivity of the flexes was induced respectively to insure that the current in local group of flexes was equal. Furthermore, a 350 kA aluminum reduction cell based electric field model was developed by finite element method to evaluate the effect of the method. Suggestions on selection of three modes were also put forward. The results show that the methods of resistance optimization can reduce the current variation about 180 A compared with that in original case.

Theoretical Study on Drift of Ca^(2+)Spiral Waves Controlled by Electric Field

Based on the Tang-Othmer Ca^2＋ model, the drift behavior of intracellular Ca^2＋ spiral waves under the influence of weak electric field is investigated. Numerical results show that the dependence of drift velocity of the spiral tip on dc electric field is similar to experimental observations in BZ system. When an ac electric field is applied, interesting resonant-drift phenomenon is observed with ω=2ω0. All results can be explained analytically using a proximate method.

Three-dimensional forward modeling for magnetotelluric sounding by finite element method

A finite element algorithm combined with divergence condition was presented for computing three-dimensional(3D) magnetotelluric forward modeling. The finite element equation of three-dimensional magnetotelluric forward modeling was derived from Maxwell's equations using general variation principle. The divergence condition was added forcedly to the electric field boundary value problem, which made the solution correct. The system of equation of the finite element algorithm was a large sparse, banded, symmetric, ill-conditioned, non-Hermitian complex matrix equation, which can be solved using the Bi-CGSTAB method. In order to prove correctness of the three-dimensional magnetotelluric forward algorithm, the computed results and analytic results of one-dimensional geo-electrical model were compared. In addition, the three-dimensional magnetotelluric forward algorithm is given a further evaluation by computing COMMEMI model. The forward modeling results show that the algorithm is very efficient, and it has a lot of advantages, such as the high precision, the canonical process of solving problem, meeting the internal boundary condition automatically and adapting to all kinds of distribution of multi-substances.

Electromagnetic fields from a horizontal electrical dipole buried in ocean

Marine controlled source electromagnetic signal could be used in mineral resource exploration,reservoir appraisal and communicative technique in ocean. It's necessary to study the electromagnetic generated by MCSEM. The propagation of the electromagnetic fields from a controlled source in the marine environment was studied with virtual interface method combined with discrete complex image method. Transmitter of finite length current source is approximated by dipole (HED) . A three-layered model is accepted,with sea water as intermediate conductive layer under air and a relatively high resistive seabed as basement,possibly containing a hydrogen layer of higher resistivity. The electromagnetic fields in whole space thus computed show that: (1) the spatial distribution of field component depends on its type; (2) inline Ex component is more sensitive to reservoir layer than that in broadside; (3) The airwave affects marine electromagnetic (MEM) exploration when sea water is relatively shallow; in the case of deep water MEM exploration,the airwave influence could be neglected; and (4) an appropriate frequency should be selected in order to balance the signal strength and electromagnetic induction effect.

Optimal Design for Open MRI Superconducting Magnet with Active Shielding

The optimal design method for an open Magnetic Resonance Imaging （MRI） superconducting magnet with an active shielding configuration is proposed. Firstly, three pairs of current rings are employed as seed coils. By optimizing the homogeneity of Diameter Sphere Voltnne （DSV）, the positions and currents of the seed coils will be obtained. Secondly, according to the positions and currents of the seed coils, the current density of superconducting wires is determined, and then the original sections for the coils can be achieved. An optimization for the homogeneity based on the constrained nonlincar optimization method is employed to determine the coils with good homogeneity. Thirdly, the magnetic field generated by previous coils is set as the background field, then add two coils with reverse current, and optimize the stray field line of 5 Gauss in a certain scope. Finally, a further optimization for the homogeneity is used to get Final coils. This method can also be used in the design of other axisynmaetfic superconducting MRI magnets.

Seismic Design of Offshore Wind Turbine Withstands Great East Japan Earthquake and Tsunami

Japan＇s first open sea offshore wind farm, Kamisu offshore windfarm Phase l, was stricken by an earthquake of intensity 6 on the Japanese seismic scale and a five-meter-high tsunami during the Great East Japan Earthquake on March 11,2011. The wind farm resumed operation on March 14 after checks revealed no damage to the system, even though the wind farm was temporarily forced to stop due to the grid failure caused by the earthquake. Wind turbines require a precise seismic design especially in an earthquake-prone country such as Japan. Wind power Kamisu Phase 2 was built one year after the earthquake based on the experience of Kamisu Phase 1. This paper presents the seismic design of offshore wind turbines and the situation during the earthquake and tsunami.

Capacitance Evaluation on Non-parallel Thick-Plate Capacitors by Means of Finite Element Analysis

In this work we show the influence of the edge-effect on the electric field distribution and, hence, on the inner and outer capacitance in an inclined-plate capacitor system surrounded by an insulating medium taking into account the thickness of the conducting plates for a complete set of dimensions and insulating characteristics. Where available, we compare our results with previously published works. Finally, using statistical tools, we obtain approximate expression for computing the relationship between capacitance and insulation material characteristics, insulation gap, plate dimensions and angle.

Integral Transformation of the Pulse Function for High Voltage Technique

One function for approximating pulse quantities in high voltage technique is presented in this paper. The function derivative, its integral, as well as its Laplace and Fourier transform are obtained analytically. Integral transformations of the pulse function are needed in frequency domain calculations of lightning induced effects in the case of a lossy ground. The pulse function having adequately chosen parameters is applied in lightning discharge modeling for lightning electromagnetic field calculation, and the results are in agreement with the results from literature. The choice of function parameters is based on their influence on the pulse waveshape which is presented in the paper. Numerical results for the Fourier transform are presented for different usually used pulse functions. The advantages of this function are simple choice of its parameters according to the desired waveshape characteristics and analytical solutions useful in lightning discharge modeling, electromagnetic field computation and induced effects calculations.

Electromagnetic Fields and Induced Voltages on Underground Pipeline in the Vicinity of AC Traction System

Various regulations, aimed at the protection of human beings and electrical equipment against possible adverse effects resulting from exposure to electromagnetic fields, have been issued in many countries. Most of them are based on safety guidelines published by international expert groups. In this paper, electric and magnetic fields are calculated in the vicinity of 25 kV traction line supplying railway traction systems. Calculation results are compared to exposure limits specified by safety guidelines and regulations. Possible countermeasures for reduction of electromagnetic fields are proposed. Also, this paper presents a method for calculation of the induced voltages to an underground gas pipeline from a neighbouring 25 kV electric traction overhead line in case of short circuit. Calculations are performed with EMTP-ATP software. Possible countermeasures for reduction of induced voltages are proposed.

Calculation of Steady SF_6 Gas Flow through a 420 kV Circuit Breaker Nozzle and Electric Field Distribution

Special interest in current interruptions is dedicated to the processes close to the current zero instant, the so-called interaction region, which determines the circuit breakers＇ performance. The quantities of interest in this region are the distribution of temperature, density and pressure, velocity and gas mass flow along the electric arc axis, as well as the distribution of electric stress between contacts Calculation of steady SF_6 gas flow through the nozzle of a 420 kV circuit breaker at the current zero instant, for different arcing durations, was carried out using a commercial CFD （computational fluid dynamics） simulation tool. The calculation results were used to get insight into improvement possibilities of the SF_6 gas flow model used in the software for computer simulation of HV （high-voltage） circuit breakers. Electric field calculation results were performed for the same 420 kV circuit breaker, in order to estimate the breakdown voltage at the current zero instant.

Evaluation of power market designs on investment incentives and capacity adequacy

Electricity industry restructuring should not sacrifice supply security to pursue economic efficiency. Till now there is no academic consensus on which electricity market design provides the least distorting investment incentives. Alternative approaches that have been adopted around the world for ensuring the appropriate level of investment in electric generation capacity are discussed, and much attention is devoted on the evaluation of capacity payment systems. The finding is that on one hand, capacity payment systems have good effect on reducing spot market price volatility and increasing the volume of generating capacity at the costs of relatively high total electricity prices; on the other hand, however, they are not robust against either the abuse of market power in the energy market or being manipulated.

CFD simulation of high-temperature effect on EHD characteristics in a wire-plate electrostatic precipitator

A computational fluid dynamics （CFD） model is carried out to describe the wire-plate electrostatic precipitator （ESP） in high temperature conditions, aiming to study the effects of high temperature on the electro- hydrodynamic （EHD） characteristics. In the model, the complex interactions at high temperatures between the electric field, fluid dynamics and the particulate flow are taken into account. We apply different numerical methods for different fields, including an electric field model, Euler-Lagrange particle-laden flows model, and particle charging model. The effects of high temperature on ionic wind, EHD characteristics and collection effi- ciency are investigated. The numerical results show high temperature causes more significant effects of the ionic wind on the gas secondary flow. High viscosity of gas at high temperature makes particles follow the gas flow pattern more closely. High temperature reduces the surface electric strength, so that the mean electric strength weakens the space charging. On the contrary, there is an increase in the diffusion charging at high tem- perature compared with at low temperature. High temperature increases the ratio of mean drag force over mean electrostatic force actin~ on the ~atticles which mav contribute to a decline of collection efficiencv.