Electron beam welding of Ti-15-3 alloy to 304 stainless steel （STS） using a copper filler metal was carried out. The temperature fields and stress distributions in the Ti/Fe and Ti/Cu/Fe joint during the welding pro...Electron beam welding of Ti-15-3 alloy to 304 stainless steel （STS） using a copper filler metal was carried out. The temperature fields and stress distributions in the Ti/Fe and Ti/Cu/Fe joint during the welding process were numerically simulated and experimentally measured. The results show that the rotated parabola body heat source is fit for the simulation of the electron beam welding. The temperature distribution is asymmetric along the weld center and the temperature in the titanium alloy plate is higher than that in the 304 STS plate. The thermal stress also appears to be in asymmetric distribution. The residual tensile stress mainly exists in the weld at the 304 STS side. The copper filler metal decreases the peak temperature and temperature grade in the joint as well as the residual stress. The longitudinal and lateral residual tensile strengths reduce by 66 MPa and 31 MPa, respectively. From the temperature and residual stress, it is concluded that copper is a good filler metal candidate for the electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel.展开更多
this work,the polarization effects of a strongly magnetized quark-gluon plasma are studied at finite temperature.It is found that a background magnetic field can have a strong effect on the photon and dilepton emissio...this work,the polarization effects of a strongly magnetized quark-gluon plasma are studied at finite temperature.It is found that a background magnetic field can have a strong effect on the photon and dilepton emission rates.It affects not only the total rate but also the angular dependence.In particular,the Landau-level quantization leads to a nontrivial momentum dependence of the photon/dilepton anisotropic flow coefficient on transverse momentum.In the case of photon emission,nonzero coefficients v_(n)(with even n)have opposite signs at small and large values of the transverse momentum.Additionally,the v_(n) signs alternate with increasing vn,and their approximate values decrease as 1/n^(2) in magnitude.The anisotropy of dilepton emission is well-pronounced only at large transverse momenta and small invariant masses.The corresponding Un coefficients are of the same magnitude and show a similar sign-alternative pattern with increasing n as in the photon emission.It is proposed that the anisotropy of the photon and dilepton emission may serve as indirect measurements of the magnetic field.展开更多
Oil immersed power transformer is the main electrical equipment in power system.Its operation reliability has an important impact on the safe operation of power system.In the process of production,installation and ope...Oil immersed power transformer is the main electrical equipment in power system.Its operation reliability has an important impact on the safe operation of power system.In the process of production,installation and operation,its insulation structure may be damaged,resulting in partial discharge and even breakdown inside the transformer.In this paper,S9-M-100/10 oil immersed distribution transformer is taken as the research object,and the distribution laws of electromagnetic field and temperature field in transformer under normal operation,inter turn short circuit and inter layer short circuit are simulated and analyzed.The simulation results show that under normal conditions,the temperatures at the oil gap between the transformer core and the high and low voltage windings and the middle position of the high-voltage winding are high.When there are inter turn and inter layer short circuit faults,the electromagnetic loss of the fault part of the transformer increases,and the temperature rises suddenly.The influence of the two faults on the internal temperature field of the transformer is different,and the influence of the inter turn short circuit fault on the temperature nearby is obvious.The analysis results can provide reference for the thermal fault interpretation and fault classification of transformer.展开更多
In a two-dimensional quantum dot （QD） with parabolic confinement potential, we investigate pure dephasing due to deformation potential exciton-bulk longitudinal acoustic phonons （LAP） interaction for exciton qubit...In a two-dimensional quantum dot （QD） with parabolic confinement potential, we investigate pure dephasing due to deformation potential exciton-bulk longitudinal acoustic phonons （LAP） interaction for exciton qubits under the influence of external static electric and magnetic fields by adopting the full quantum-mechanical method of Kunihiro Kojima and Akihisa Tomita. The wave function is found and the dependence of the pure dephasing factor on the confinement length of the QD and time and temperature is discussed. We find the external electric and magnetic fields have important effects on pure dephasing of exciton qubits because exciton-LAP interaction increases, leading to more pure dephasing.展开更多
基金Foundation item:Project (2010CB731704) supported by the National Basic Research Program of ChinaProject (51075189) supported by the National Natural Science Foundation of China
文摘Electron beam welding of Ti-15-3 alloy to 304 stainless steel （STS） using a copper filler metal was carried out. The temperature fields and stress distributions in the Ti/Fe and Ti/Cu/Fe joint during the welding process were numerically simulated and experimentally measured. The results show that the rotated parabola body heat source is fit for the simulation of the electron beam welding. The temperature distribution is asymmetric along the weld center and the temperature in the titanium alloy plate is higher than that in the 304 STS plate. The thermal stress also appears to be in asymmetric distribution. The residual tensile stress mainly exists in the weld at the 304 STS side. The copper filler metal decreases the peak temperature and temperature grade in the joint as well as the residual stress. The longitudinal and lateral residual tensile strengths reduce by 66 MPa and 31 MPa, respectively. From the temperature and residual stress, it is concluded that copper is a good filler metal candidate for the electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel.
文摘this work,the polarization effects of a strongly magnetized quark-gluon plasma are studied at finite temperature.It is found that a background magnetic field can have a strong effect on the photon and dilepton emission rates.It affects not only the total rate but also the angular dependence.In particular,the Landau-level quantization leads to a nontrivial momentum dependence of the photon/dilepton anisotropic flow coefficient on transverse momentum.In the case of photon emission,nonzero coefficients v_(n)(with even n)have opposite signs at small and large values of the transverse momentum.Additionally,the v_(n) signs alternate with increasing vn,and their approximate values decrease as 1/n^(2) in magnitude.The anisotropy of dilepton emission is well-pronounced only at large transverse momenta and small invariant masses.The corresponding Un coefficients are of the same magnitude and show a similar sign-alternative pattern with increasing n as in the photon emission.It is proposed that the anisotropy of the photon and dilepton emission may serve as indirect measurements of the magnetic field.
基金Science and Technology Project of State Grid Gansu Electric Power Company(No.52272219000Q)。
文摘Oil immersed power transformer is the main electrical equipment in power system.Its operation reliability has an important impact on the safe operation of power system.In the process of production,installation and operation,its insulation structure may be damaged,resulting in partial discharge and even breakdown inside the transformer.In this paper,S9-M-100/10 oil immersed distribution transformer is taken as the research object,and the distribution laws of electromagnetic field and temperature field in transformer under normal operation,inter turn short circuit and inter layer short circuit are simulated and analyzed.The simulation results show that under normal conditions,the temperatures at the oil gap between the transformer core and the high and low voltage windings and the middle position of the high-voltage winding are high.When there are inter turn and inter layer short circuit faults,the electromagnetic loss of the fault part of the transformer increases,and the temperature rises suddenly.The influence of the two faults on the internal temperature field of the transformer is different,and the influence of the inter turn short circuit fault on the temperature nearby is obvious.The analysis results can provide reference for the thermal fault interpretation and fault classification of transformer.
基金supported by National Natural Science Foundation of China under Grant No.10347004
文摘In a two-dimensional quantum dot （QD） with parabolic confinement potential, we investigate pure dephasing due to deformation potential exciton-bulk longitudinal acoustic phonons （LAP） interaction for exciton qubits under the influence of external static electric and magnetic fields by adopting the full quantum-mechanical method of Kunihiro Kojima and Akihisa Tomita. The wave function is found and the dependence of the pure dephasing factor on the confinement length of the QD and time and temperature is discussed. We find the external electric and magnetic fields have important effects on pure dephasing of exciton qubits because exciton-LAP interaction increases, leading to more pure dephasing.
