声场电声控制技术的原理与应用

说明了声场控制技术的内涵,阐述了声场控制(声场支援)的原理和方法,列举了声场控制的典型应用示例。

Modelling of ultrasonic motor with dead-zone based on Hammerstein model structure

The ultrasonic motor (USM) possesses heavy nonlinearities which vary with driving conditions and load-dependent characteristics such as the dead-zone. In this paper, an identification method for the rotary travelling-wave type ultrasonic motor (RTWUSM) with dead-zone is proposed based on a modified Hammerstein model structure. The driving voltage contributing effect on the nonlinearities of the RTWUSM was transformed to the change of dynamic parameters against the driving voltage. The dead-zone of the RTWUSM is identified based upon the above transformation. Experiment results showed good agreement be- tween the output of the proposed model and actual measured output.

A unified model in the pulsed laser ablation process

In this unified model,we introduce the electron-phonon coupling time(tie) and laser pulse width(tp).For long pulses,it can substitute for the traditional thermal conduction model;while for ultrashort pulses,it can substitute for the standard two-temperature model.As an example of the gold target,we get the dependence of the electron and ion temperature evolvement on the time and position by solving the thermal conduction equation using the finite-difference time-domain(FDTD) method.It is in good agreement with experimental data.We obtain the critical temperature of the onset of ablation using the Saha equation and then obtain the theoretical value of the laser ablation threshold when the laser pulse width ranges from nano-second to femtosecond timescale,which consists well with the experimental data.

Noise Reduction of Welding Defect Image Based on NSCT and Anisotropic Diffusion

In order to reduce noise effectively in the welding defect image and preserve the minutiae information, a noise reduction method of welding defect image based on nonsubsampled contourlet transform(NSCT) and anisotropic diffusion is proposed. Firstly, an X-ray welding defect image is decomposed by NSCT. Then total variation(TV) model and Catte_PM model are used for the obtained low-pass component and band-pass components, respectively. Finally, the denoised image is synthesized by inverse NSCT. Experimental results show that, compared with the hybrid method of wavelet threshold shrinkage with TV diffusion, the method combining NSCT with P_Laplace diffusion, and the method combining contourlet with TV model and adaptive contrast diffusion, the proposed method has a great improvement in the aspects of subjective visual effect, peak signal-to-noise ratio(PSNR) and mean-square error(MSE). Noise is suppressed more effectively and the minutiae information is preserved better in the image.

Structural-acoustic coupling characteristics of honeycomb sandwich plate based on parameter sensitivity analysis

The structural-acoustic coupling model for isotropic thin elastic plate was extended to honeycomb sandwich plate(HSP) by applying Green function method.Then an equivalent circuit model of the weakly-strongly coupled system was proposed.Based on that,the estimation formulae of the coupled eigenfrequency were derived.The accuracy of the theoretical predictions was checked against experimental data,with good agreement achieved.Finally,the effects of HSP design parameters on the system coupling degree,the acoustic cavity eigenfrequency,and sound pressure response were analyzed.The results show that mechanical and acoustical characteristics of HSP can be improved by increasing the thickness of face sheet and reducing the mass density of material.

Preparation and characterization of Al/B/Fe_2O_3 nanothermites

A sol-gel synthetic approach combined with an ultrasonic method was utilized to prepare Al/B/Fe2O3 nanothermites.The structure and properties of the prepared nanothermites were characterized by thermogravimetric analysis,differential scanning calorimetry,scanning electron microscopy,X-ray diffraction,and an impact sensitivity test.The results verified that the nano-aluminum and the micro-boron were uniformly dispersed in the pores of the iron oxide gel.The heat of the prepared Al/B/Fe2O3 nanothermites was 1.3 times that of the simple physically mixed sample.In addition,the heat of the combustion test showed that these materials were indeed energetic.Small-scale safe experiments also showed that the prepared materials through sol-gel were relatively insensitive to standard impact.

Removal of White Noise from ECG Signal Based on Morphological Component Analysis

To effectively suppress white noise and preserve more useful components of electrocardiogram(ECG) signal, a novel de-noising method based on morphological component analysis(MCA) is proposed. MCA is a method which allows us to separate features contained in an original signal when these features present different morphological aspects. According to the features of ECG, we used the UWT dictionary to sparsely represent mutated component, and used the DCT dictionary to sparsely represent smooth component. The experimental results of the samples choosing from MIT-BIH databases show that the MCA-based method is effective for white noise removal.

Advances and New Applications Using the Acousto-Optic Effect in Optical Fibers

This work presents a short review of the current research on the acousto-optic mechanism applied to optical fibers. The role of the piezoelectric element and the acousto-optic modulator in the excitation of flexural and longitudinal acoustic modes in the frequency range up to 1.2 MHz is highlighted. A combination of the finite elements and the transfer matrix methods is used to simulate the interaction of the waves with Bragg and long period gratings. Results show a very good agreement with experimental data. Recent applications such as the writing of gratings under the acoustic excitation and a novel viscometer sensor based on the acousto-optic mechanism are discussed.