Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of th...Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of the EBA are： energy 0.5 to 1.5 MeV; beam current： 0.3 to 25.0 mA; beam scanning： 60 to 120 cm; beam width： 25.4 mm and frequency： 100 Hz. Nowadays, this accelerator has been used for innumerable applications, such as： For sterilization of medical, pharmaceutical and biological products, treatment of industrial and domestic effluents and sludge, preservation and disinfestations of foods and agricultural products. Other important application are lignocellulosic material irradiation as a pre-treatment to produce ethanol bio-fuel, decontamination of pesticide packing, solid residues remediation, organic compounds removal from wastewater, treatment of effluent from petroleum production units, crosslinking of foams, wires and electric cables. Electron accelerator JOB 188 is, also, very important composite and nanocomposite materials and carbon fibers irradiation, irradiated grafting ion-exchange membranes for fuel cells application, natural polymers and multilayer packages irradiation and biodegradable blends production. The energy of the electron beam is calculated as a function of the current in the accelerator high-voltage divisor, taking into account the thickness and density of the material to be irradiated. This energy is calculated considering the electron through the entire material and the distance from the titanium foil window, so that the absorbed doses at the points of entrance and exit are equivalent on the material. The dose is directly proportional to the beam current and the exposure time of the material under the electron beam and inversely proportional to the scan width. The aim of this paper is to analyze the power system parameters of the EBA Dynamitron DC 1500/25/04, such as, voltage and RMS （Root-mean-square） current in the oscillator system, high voltage generator and waveform. For this purpose software developed in the Radiation Technology Center at IPEN/CNEN-SP to simulate the energy efficiency of this industrial accelerator. Finally, it is also targeted to compare theoretical dosimetry using parameters of energy and beam current with data from the accelerator power system. This knowledge and technology will be very useful and essential for the control system upgrade of EBA, mainly Dynamitron DC 1500/25/04 taking into consideration that radiation processing technology for industrial and environmental applications has been developed and used worldwide.展开更多
A spectral numerical analysis method to analyze the Er-doped waveguide amplifiers(EDWA) in wavelength division multiplexing is presented. This model is based on finite difference beam propagation method modified by Do...A spectral numerical analysis method to analyze the Er-doped waveguide amplifiers(EDWA) in wavelength division multiplexing is presented. This model is based on finite difference beam propagation method modified by Douglas scheme, which can efficiently reduce the truncation error and time consumption. By superposing the Lorentzian function for the experimental curves, the spectral properties of EDWA can be investigated. Results show that the pump efficiency of EDWA pumped at 980nm is higher than that at 1480nm. Meanwhile, by rationally increasing the pump length and the erbium concentration, larger signal gains can be acquired. Taking account of the up-conversion and cross-relaxation effects of cooperation, the spectrum analysis of highly doped EDWA is carried out over a wider frequency band.展开更多
Potential failures of electronic instrument are very common in the engineering practice.In this paper,potential failure state model is analyzed based on dynamic characteristics of electronic instrument at work and a c...Potential failures of electronic instrument are very common in the engineering practice.In this paper,potential failure state model is analyzed based on dynamic characteristics of electronic instrument at work and a comprehensive method of judging multi-state reliability is put forward.Then,a multi-state electronic instrument reliability analysis model is built based on Bayesian Networks(BN).Considering the failure-potential failure-normal work states,the model is built to estimate reliability of the system and the conditional probability of the elements.Finally,the model is proved corrective and effective by examples.展开更多
The paper deals with some questions of important aspects of food safety and application of principles of food physics in the food sector. Food production and processing of quality food and safe food are today of prima...The paper deals with some questions of important aspects of food safety and application of principles of food physics in the food sector. Food production and processing of quality food and safe food are today of primary importance. Food production is based on the principles of Good Agricultural Practice （GAP）, Good Manufactoring Practice （GMP） and Good Hygiene Practice （GHP）. Recently, the industrial food processing is focused dominantly on the quality, and one of the basic requirements of the quality is the safety. There are different methods and techniques to produce safe food. The up-to-date food technologies and quality measurements （quality control and quality assurance） involve the application of different physical methods, e.g., high pressure, pulsing electrical field, nondestructive techniques, e.g., nuclear magnetic resonance （NMR）, near infrared reflectance, near infrared transmittance （NIR-NIT）, photo acoustic spectroscopy （PAS） and instrumental neutron activation analysis （INAA） for chemical composition determination, radiation techniques, nanofiltration and reverse osmosis （RO） as well. Using ionizing radiation （nuclear methods） and non-ionizing radiation technologies, it is possible to fulfill a lot of expectations： decrease of microbial contamination, improve of sensory properties, increase of storability, etc..展开更多
文摘Dynamitron DC1500/25/04 type EBA （Electron beam accelerator）, model JOB 188, was manufactured by IBA Industrial （Radiation Dynamics, Inc.） and installed at IPEN-CNEN/SP, in 1978. The technical specifications of the EBA are： energy 0.5 to 1.5 MeV; beam current： 0.3 to 25.0 mA; beam scanning： 60 to 120 cm; beam width： 25.4 mm and frequency： 100 Hz. Nowadays, this accelerator has been used for innumerable applications, such as： For sterilization of medical, pharmaceutical and biological products, treatment of industrial and domestic effluents and sludge, preservation and disinfestations of foods and agricultural products. Other important application are lignocellulosic material irradiation as a pre-treatment to produce ethanol bio-fuel, decontamination of pesticide packing, solid residues remediation, organic compounds removal from wastewater, treatment of effluent from petroleum production units, crosslinking of foams, wires and electric cables. Electron accelerator JOB 188 is, also, very important composite and nanocomposite materials and carbon fibers irradiation, irradiated grafting ion-exchange membranes for fuel cells application, natural polymers and multilayer packages irradiation and biodegradable blends production. The energy of the electron beam is calculated as a function of the current in the accelerator high-voltage divisor, taking into account the thickness and density of the material to be irradiated. This energy is calculated considering the electron through the entire material and the distance from the titanium foil window, so that the absorbed doses at the points of entrance and exit are equivalent on the material. The dose is directly proportional to the beam current and the exposure time of the material under the electron beam and inversely proportional to the scan width. The aim of this paper is to analyze the power system parameters of the EBA Dynamitron DC 1500/25/04, such as, voltage and RMS （Root-mean-square） current in the oscillator system, high voltage generator and waveform. For this purpose software developed in the Radiation Technology Center at IPEN/CNEN-SP to simulate the energy efficiency of this industrial accelerator. Finally, it is also targeted to compare theoretical dosimetry using parameters of energy and beam current with data from the accelerator power system. This knowledge and technology will be very useful and essential for the control system upgrade of EBA, mainly Dynamitron DC 1500/25/04 taking into consideration that radiation processing technology for industrial and environmental applications has been developed and used worldwide.
基金Natural Science Foundation of Shaanxi Province(2004CS110005) Research Foundation of NorthwesternPolytechnical University
文摘A spectral numerical analysis method to analyze the Er-doped waveguide amplifiers(EDWA) in wavelength division multiplexing is presented. This model is based on finite difference beam propagation method modified by Douglas scheme, which can efficiently reduce the truncation error and time consumption. By superposing the Lorentzian function for the experimental curves, the spectral properties of EDWA can be investigated. Results show that the pump efficiency of EDWA pumped at 980nm is higher than that at 1480nm. Meanwhile, by rationally increasing the pump length and the erbium concentration, larger signal gains can be acquired. Taking account of the up-conversion and cross-relaxation effects of cooperation, the spectrum analysis of highly doped EDWA is carried out over a wider frequency band.
基金supported by the Natural Science Foundation of China(No.60971092)
文摘Potential failures of electronic instrument are very common in the engineering practice.In this paper,potential failure state model is analyzed based on dynamic characteristics of electronic instrument at work and a comprehensive method of judging multi-state reliability is put forward.Then,a multi-state electronic instrument reliability analysis model is built based on Bayesian Networks(BN).Considering the failure-potential failure-normal work states,the model is built to estimate reliability of the system and the conditional probability of the elements.Finally,the model is proved corrective and effective by examples.
文摘The paper deals with some questions of important aspects of food safety and application of principles of food physics in the food sector. Food production and processing of quality food and safe food are today of primary importance. Food production is based on the principles of Good Agricultural Practice （GAP）, Good Manufactoring Practice （GMP） and Good Hygiene Practice （GHP）. Recently, the industrial food processing is focused dominantly on the quality, and one of the basic requirements of the quality is the safety. There are different methods and techniques to produce safe food. The up-to-date food technologies and quality measurements （quality control and quality assurance） involve the application of different physical methods, e.g., high pressure, pulsing electrical field, nondestructive techniques, e.g., nuclear magnetic resonance （NMR）, near infrared reflectance, near infrared transmittance （NIR-NIT）, photo acoustic spectroscopy （PAS） and instrumental neutron activation analysis （INAA） for chemical composition determination, radiation techniques, nanofiltration and reverse osmosis （RO） as well. Using ionizing radiation （nuclear methods） and non-ionizing radiation technologies, it is possible to fulfill a lot of expectations： decrease of microbial contamination, improve of sensory properties, increase of storability, etc..
