In this paper, the high speed tension experiments have been performed on ultra high strength bulletproof steel. The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of ...In this paper, the high speed tension experiments have been performed on ultra high strength bulletproof steel. The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2.3 mm. The mechanical properties at strain rates of 0.001 s^-1, 0.01 s^-1, 0.1 s^-1 and 1 s^-1 were carried out on MTSS10, while those at higher strain rates of 200 s^-1, 500 s^-1 and i 000 s^-1 were tested on HTM5020 high speed tension tester and Hopkinson bar. The data from the high speed tension experiments were fitted via Johnson-Cook constitutive equation, and the fracture surface of each specimen was analyzed by scanning electron microscope （SEM）. The results indicate that, the shoot resistance capability of bulletproof steel is closely related to its strength, thickness and flow behaviors under high strain rate. The shoot resistance will be improved in the case of higher strength and better matching between strength and elongation. The Johnson-Cook constitutive equation fitted via experimental data provides fundament to numerical simulation. With the increase of strain rate, the size and depth of dimple trend to decrease and the depth of dimple changes less in steel with lower strength and higher elongation. The SEM analysis of fracture aspect is of benefit for further understanding of deformation and fracture mode under high strain rate.展开更多
A new model of a quantum heat engine （QHE） cycle is established, in which the working substance consists of an interacting electrons system. One of our purposes is to test the validity of the second law of thermodyn...A new model of a quantum heat engine （QHE） cycle is established, in which the working substance consists of an interacting electrons system. One of our purposes is to test the validity of the second law of thermodynamics by this model, which is more general than the spin-1/2 antiferromagnetic Heisenberg model since it would recover the spin model when the on-site Coulomb interaction U is strong enough. On the basis of quantum mechanics and the first law of thermodynamics, we show no violation of the second law of thermodynamics during the cycle. We further study the performance characteristics of the cycle by investigating in detail the optimal relations of efficiency and dimensionless power output. We find that the efficiency of our engine can be expressed as η = t22/t21 in the large-U limit, which is valid even for a four sites QHE.展开更多
文摘In this paper, the high speed tension experiments have been performed on ultra high strength bulletproof steel. The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2.3 mm. The mechanical properties at strain rates of 0.001 s^-1, 0.01 s^-1, 0.1 s^-1 and 1 s^-1 were carried out on MTSS10, while those at higher strain rates of 200 s^-1, 500 s^-1 and i 000 s^-1 were tested on HTM5020 high speed tension tester and Hopkinson bar. The data from the high speed tension experiments were fitted via Johnson-Cook constitutive equation, and the fracture surface of each specimen was analyzed by scanning electron microscope （SEM）. The results indicate that, the shoot resistance capability of bulletproof steel is closely related to its strength, thickness and flow behaviors under high strain rate. The shoot resistance will be improved in the case of higher strength and better matching between strength and elongation. The Johnson-Cook constitutive equation fitted via experimental data provides fundament to numerical simulation. With the increase of strain rate, the size and depth of dimple trend to decrease and the depth of dimple changes less in steel with lower strength and higher elongation. The SEM analysis of fracture aspect is of benefit for further understanding of deformation and fracture mode under high strain rate.
基金supported by the National Natural Science Foundation of China (Grant Nos.50971011,11174022 and 10974011)the Beijing Natural Science Foundation (Grant No.1102025)+1 种基金the State Key Laboratory of Software Development Environment (Grant No.SKLSDE-2011ZX-19)the Research Fund for the Doctoral Program of Higher Education of China(Grant No.20091102110038)
文摘A new model of a quantum heat engine （QHE） cycle is established, in which the working substance consists of an interacting electrons system. One of our purposes is to test the validity of the second law of thermodynamics by this model, which is more general than the spin-1/2 antiferromagnetic Heisenberg model since it would recover the spin model when the on-site Coulomb interaction U is strong enough. On the basis of quantum mechanics and the first law of thermodynamics, we show no violation of the second law of thermodynamics during the cycle. We further study the performance characteristics of the cycle by investigating in detail the optimal relations of efficiency and dimensionless power output. We find that the efficiency of our engine can be expressed as η = t22/t21 in the large-U limit, which is valid even for a four sites QHE.
