Organic solar cells （OSCs） is a new generation of solar cells have emerged as an alternative to conventional Si-based solar cells owing to their advantages of low cost, ease of fabrication and their potential for th...Organic solar cells （OSCs） is a new generation of solar cells have emerged as an alternative to conventional Si-based solar cells owing to their advantages of low cost, ease of fabrication and their potential for the manufacture of flexible and large area solar cells. So we chose that part to beginning study of the material and all parameters effects in environmental condition because the solar cell working in environment. In this study the fabrication of poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl C61-butyric acid methyl ester （PCBM） blend flexible thin film using spin coating was reported. Process parameters like solvent, electron donor to acceptor ratio, concentration and temperature were also studied. We used solvent systems to make active layer of P3HT：PCBM composite and PEDOT：PSS as a buffer layer. Highest absorption was obtained for the flexible thin film made with 1：1 and 1：0.75 ratio of P3HT to PCBM. Chloroform solvent in 40 gm/ml concentration at 90 ~C was the optimum conditions to make flexible device.展开更多
An A-D-A-type small molecule, DCF-2HT, was synthesized using fluorene as the central block and 2- （2,3-dihydro-3-oxo- 1H-inden- 1-ylidene）propanedinitrile as the end groups, with one hexyl-substituted thiophene as a...An A-D-A-type small molecule, DCF-2HT, was synthesized using fluorene as the central block and 2- （2,3-dihydro-3-oxo- 1H-inden- 1-ylidene）propanedinitrile as the end groups, with one hexyl-substituted thiophene as a n bridge, for use as an acceptor material in organic solar cells. Devices based on DCF-2HT and the polymer donors PBDB-T or PTB7-Th were fabricated and optimized. Power conversion efficiencies of 5.71% and 4.83% were obtained for PBDB-T： DCF-2HT- and PTB7-Th： DCF-2HT-based devices, respectively.展开更多
文摘Organic solar cells （OSCs） is a new generation of solar cells have emerged as an alternative to conventional Si-based solar cells owing to their advantages of low cost, ease of fabrication and their potential for the manufacture of flexible and large area solar cells. So we chose that part to beginning study of the material and all parameters effects in environmental condition because the solar cell working in environment. In this study the fabrication of poly（3-hexylthiophene） （P3HT） and [6,6]-phenyl C61-butyric acid methyl ester （PCBM） blend flexible thin film using spin coating was reported. Process parameters like solvent, electron donor to acceptor ratio, concentration and temperature were also studied. We used solvent systems to make active layer of P3HT：PCBM composite and PEDOT：PSS as a buffer layer. Highest absorption was obtained for the flexible thin film made with 1：1 and 1：0.75 ratio of P3HT to PCBM. Chloroform solvent in 40 gm/ml concentration at 90 ~C was the optimum conditions to make flexible device.
基金supported by the Ministry of Science and Technology(2014CB643502 and 2016YFA0200200)the National Natural Science Foundation of China(21404060 and 91433101)
文摘An A-D-A-type small molecule, DCF-2HT, was synthesized using fluorene as the central block and 2- （2,3-dihydro-3-oxo- 1H-inden- 1-ylidene）propanedinitrile as the end groups, with one hexyl-substituted thiophene as a n bridge, for use as an acceptor material in organic solar cells. Devices based on DCF-2HT and the polymer donors PBDB-T or PTB7-Th were fabricated and optimized. Power conversion efficiencies of 5.71% and 4.83% were obtained for PBDB-T： DCF-2HT- and PTB7-Th： DCF-2HT-based devices, respectively.
