Tensile tests of solid solution treated 7050 aluminum alloy were conducted to different strain degrees (0.1, 0.4, 0.6 and failure) at 460 ℃ with the strain rate of 1.0×10-4-1.0×10-1s-1. The boundary misorie...Tensile tests of solid solution treated 7050 aluminum alloy were conducted to different strain degrees (0.1, 0.4, 0.6 and failure) at 460 ℃ with the strain rate of 1.0×10-4-1.0×10-1s-1. The boundary misorientation angle evolution during hot deformation of the 7050 aluminum alloy was studied by EBSD technique and the fracture surfaces were observed using SEM. A linear relationship between the increase in the average boundary misorientation angle and the true strain at different strain rates is assumed when aluminum alloy is deformed at 460 ℃. The increasing rate of average boundary misorientation angle is 15.1-, 15.7- and -0.75- corresponding to the strain rate of 1.0×10-4, 1.0×10-2 and 0.1 s-1, respectively. The main softening mechanism is continuous dynamic recrystallization when the strain rates are 1.0×10-4 and 1.0×10-2 s-1, and it is dynamic recovery when strain rate is 0.1 s-1.展开更多
The micro orientation theological behavior of AZ61 Mg alloy during net-shape forming of tensile specimens via close-die pressing of extruded preformed and the effect of the press deformation rate on the microstructure...The micro orientation theological behavior of AZ61 Mg alloy during net-shape forming of tensile specimens via close-die pressing of extruded preformed and the effect of the press deformation rate on the microstructure characteristics were characterized with electron back-scattering diffraction(EBSD)orientation imaging microscopy and metallography.The results indicate that the intensity distribution of basal{0001}<1010>texture on the cross-section of the extruded perform is uniform and parallel to the extrusion direction.Subjected to pressing in extrusion direction,deformation shear stress leads to grain rotation and basal texture {0001}<1010>deviation from the extrusion direction,spreading in the direction perpendicular to pressing direction.The texture intensity increases with the press deformation rate and reaches its peak value at 50%,which is considerably lower than the value reached in extrusion deformation.Then,the texture intensity decreases with the press deformation rate reversely.展开更多
文摘Tensile tests of solid solution treated 7050 aluminum alloy were conducted to different strain degrees (0.1, 0.4, 0.6 and failure) at 460 ℃ with the strain rate of 1.0×10-4-1.0×10-1s-1. The boundary misorientation angle evolution during hot deformation of the 7050 aluminum alloy was studied by EBSD technique and the fracture surfaces were observed using SEM. A linear relationship between the increase in the average boundary misorientation angle and the true strain at different strain rates is assumed when aluminum alloy is deformed at 460 ℃. The increasing rate of average boundary misorientation angle is 15.1-, 15.7- and -0.75- corresponding to the strain rate of 1.0×10-4, 1.0×10-2 and 0.1 s-1, respectively. The main softening mechanism is continuous dynamic recrystallization when the strain rates are 1.0×10-4 and 1.0×10-2 s-1, and it is dynamic recovery when strain rate is 0.1 s-1.
基金Project(CSTC2007AA4008)supported by the Scientific and Technological Project in Chongqing of China
文摘The micro orientation theological behavior of AZ61 Mg alloy during net-shape forming of tensile specimens via close-die pressing of extruded preformed and the effect of the press deformation rate on the microstructure characteristics were characterized with electron back-scattering diffraction(EBSD)orientation imaging microscopy and metallography.The results indicate that the intensity distribution of basal{0001}<1010>texture on the cross-section of the extruded perform is uniform and parallel to the extrusion direction.Subjected to pressing in extrusion direction,deformation shear stress leads to grain rotation and basal texture {0001}<1010>deviation from the extrusion direction,spreading in the direction perpendicular to pressing direction.The texture intensity increases with the press deformation rate and reaches its peak value at 50%,which is considerably lower than the value reached in extrusion deformation.Then,the texture intensity decreases with the press deformation rate reversely.
