The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reactio...The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reaction affect the durability and cost of PEMFCs.Most previous reports on Pt-based electrocatalyst designs have focused more on improving their activity;however,with the commercialization of PEMFCs,durability has received increasing attention.In-depth insight into the structural evolution of Pt-based electrocatalysts throughout their lifecycle can contribute to further optimization of their activity and durability.The development of in situ electron microscopy and other in situ techniques has promoted the elucidation of the evolution mechanism.This mini review highlights recent advances in the structural evolution of Pt-based electrocatalysts.The mechanisms are adequately discussed,and some methods to inhibit or exploit the structural evolution of the catalysts are also briefly reviewed.展开更多
Supported and colloidal single‐atom catalysts(SACs),which possess excellent catalytic properties,are particularly important in both fundamental studies and practical applications.The progress made in the preparation ...Supported and colloidal single‐atom catalysts(SACs),which possess excellent catalytic properties,are particularly important in both fundamental studies and practical applications.The progress made in the preparation methods,characterization,catalytic performances and mechanisms of SACs anchored to metal oxides,two‐dimensional materials and the surface of metal nanoclusters(NCs)are reviewed.The different techniques for SAC fabrication,including conventional solution methods based on co‐precipitation,incipient wetness co‐impregnation,and the chemical vapor deposition method,as well as the newer atom layer deposition(ALD)and galvanic replacement methods,are summarized.The main results from experimental and theoretical studies of various catalytic reactions over SACs,including oxidation reactions,hydrogenation,water gas shift,photocatalytic H2evolution and electrochemical reactions,are also discussed.Moreover,the electronic properties of the single atoms and their interactions with the supports are described to assist in understanding the origin of the high catalytic activity and selectivity of SACs.Finally,possible future research directions of SACs and their applications are proposed.展开更多
The auto-evolved ultrafine copper powders were synlhesized via a novel electrodeposition route performed by ultrasonic dispersion of the electrolyte. The properties of the samples obtained were characterized by X-ray ...The auto-evolved ultrafine copper powders were synlhesized via a novel electrodeposition route performed by ultrasonic dispersion of the electrolyte. The properties of the samples obtained were characterized by X-ray powder diffractometry （XRD）, transmission electron microscopy （TEM）, scanning electron microscopy （SEM） and laser size distribution analyzer （SL） respectively. The formation mechanisms of the powders and the efficiency of the elctrodeposition were discussed. The results show that the as-prepared powders are high-purity copper nanoparticles with the fcc structure taking a mixture of fishbone-like and irregular shapes When the concentration of Cu^2＋ increases from 0.03 to 0.09 mol/L, the average size of copper particles increases from 0.92 to 1.80 μm, and current efficiency of electrodeposition linearly changes from 66.5% to 91.3%.展开更多
In this paper a polyaluminum chloride solution with high Al13 content was prepared and used as raw material for preparation ofγ-Al2O3.The texture and crystalline phase of the prepared alumina samples were characteriz...In this paper a polyaluminum chloride solution with high Al13 content was prepared and used as raw material for preparation ofγ-Al2O3.The texture and crystalline phase of the prepared alumina samples were characterized by energy dispersive X-ray spectroscopy(EDX) ,X-ray diffraction,transmission electron microscope(TEM) and nuclear magnetic resonance(NMR) analyses.The effects of alkaline solution and calcination temperature were investigated.The results showed that alkaline solution including NH3·H2O and NaOH had little effect on the alumina sample formation.The impurities of NH4Cl and NaCl in solution can be removed through repeated washing by EDX analysis.Calcination temperature had a significant effect on alumina crystal phase.The alumina sample can transform completely toγ-Al2O3 in the subsequent heating from 600°C to 800°C.It is very interesting that Al13 can be existed inγ-Al2O3 phase even after calcinations.The results indicate that polyaluminum chloride with high Al13 content is an effective material to prepareγ-Al2O3.展开更多
Eu-doped GaOOH nanoparticles with size of 5-8 nm were prepared by hydrothermal method using sodium dodecylbenzene sulfonate （SDBS） as surfactant. Eu-doped α-Ga2O3 and β-Ga2O3 were further fabricated by annealing G...Eu-doped GaOOH nanoparticles with size of 5-8 nm were prepared by hydrothermal method using sodium dodecylbenzene sulfonate （SDBS） as surfactant. Eu-doped α-Ga2O3 and β-Ga2O3 were further fabricated by annealing GaOOH：Eu and then characterized by X-ray diffraction（XRD）, transmission electron microscopy （TEM） and photoluminescence （PL）. The TEM results show that monodisperse Eu^3＋-doped GaOOH nanoparticles form and then transform into Eu^3＋-doped a-Ga2O3 and β-Ga2O3 through annealing the GaOOH：Eu nanoparticles at 600 and 900℃, respectively. PL studies indicate that GaOOH：Eu has the highest intensity at 618 nm. Luminescence quenching is observed at higher Eu3＋concentration in all samples.展开更多
Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydr...Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydrothermal synthesis process. The composition, morphology and structural features of the hydrothermal products were examined with X-ray powder diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The experimental results indicate that in the conditions of n（NaOH）/n（MgSO4） of 1.25, the dosage of w（Na3PO4） crystal additives of 1.0% w（MgSO4）, stirring for 5 h at 180 ℃, the morphology of MgSO4·5Mg（OH）2·2H2O products is flaky and laminar, which is a kind of complex magnesium singlecrystal. The recycling of MgSO4 mother liquor was also investigated to make a full use of the materials and reduce disposal. The results prove that there is no adverse effect on the yield and purity of the products.展开更多
In this research, synthesis of magnesium oxide-multi walled carbon nanotube （MgO/MWCNTs） nanocomposite is reported using sol-gel method in which magnesium nitrate is added to aqueous solution. The structure of MWCNT...In this research, synthesis of magnesium oxide-multi walled carbon nanotube （MgO/MWCNTs） nanocomposite is reported using sol-gel method in which magnesium nitrate is added to aqueous solution. The structure of MWCNTs and MgO/MWCNTs composite has been characterized by analyzing the X-ray diffraction pattern （XRD）, Fourier Transform Infrared （FT-IR） spectra and Scanning Electron Microscopy （SEM） images. Experimental results indicate that the surface of purified MWCNTs sample is covered homogenously by a layered of MgO nanoparticles.展开更多
Gelatins extracted from two edible insects Aspongubus viduatus （melon bug） and Agonoscelis pubescens （sorghum bug） were studied. The two insects showed 27.0 and 28.2% crude protein, respectively. Extraction of gel...Gelatins extracted from two edible insects Aspongubus viduatus （melon bug） and Agonoscelis pubescens （sorghum bug） were studied. The two insects showed 27.0 and 28.2% crude protein, respectively. Extraction of gelatin using hot water gave high yield followed by mild acid and distilled water extraction, respectively. SDS-PAGE pattern showed low molecular weight chains, and the two gelatins contained protein with molecular weight of 40 kDa as main component. The differential scanning calorimetry thermograms results confirm no difference between extraction methods concerning the extracted gelatin quality. FTIR spectra of melon and sorghum bug gelatins were similar and the absorption bands were situated in more than 6 bands in melon bug gelatin and only 6 bands in sorghum bug gelatin. Amide II bands of gelatins from both melon and sorghum bug appeared at around 1554 cm^-1, while Amide I bands （1734-1632 cmt） appeared only in melon bug method 2 （MB2） and melon bug method3 （MB3）. Microstructures of the insect gelatin examined with the scanning electron microscope showed that melon bug exhibited the finest gelatin network with very small voids. Melon bug gelatin showed finer structure with smaller protein strands and voids than sorghum bug gelatin.展开更多
A promising preparation method for lithium hexafluorophosphate(LiPF6)was introduced.Phosphorus pentafluoride(PF5) was first prepared using CaF2 and P2O5 at 280℃for 3 h.LiPF6 was synthesized in acetonitrile solvent by...A promising preparation method for lithium hexafluorophosphate(LiPF6)was introduced.Phosphorus pentafluoride(PF5) was first prepared using CaF2 and P2O5 at 280℃for 3 h.LiPF6 was synthesized in acetonitrile solvent by LiF and PF5 at room temperature(20-30℃)for 4 h.The synthesized LiPF6 was characterized by infrared spectrometry and X-ray diffraction(XRD). Atomic absorption and ion chromatography results show that the purity of synthesized LiPF6 reaches 99.98%.Thermal stability of self-synthesized LiPF6 was analyzed by differential thermal analysis and thermogravimetry.The results indicate that the self-synthesized LiPF6 has higher purity,lower impurity contents and better thermal stability than the commercial LiPF6.展开更多
FeCrAl(f)/HA biological functionally gradient materials(FGMs) were successfully fabricated by the hot pressing technique.Scanning electron microscope(SEM),energy dispersive spectrometer(EDS) and bending strength test ...FeCrAl(f)/HA biological functionally gradient materials(FGMs) were successfully fabricated by the hot pressing technique.Scanning electron microscope(SEM),energy dispersive spectrometer(EDS) and bending strength test machine were utilized to characterize the microstructure,component,mechanical properties and the formation of the Ca-deficient apatite on the surface of these materials.The results indicate that an asymmetrical FeCrAl(f)/HA FGM,consolidating powders prepared by mixing HA with 3%–15%(volume fraction) is successfully prepared.Both of the matrix and FeCrAl fiber are integrated very tightly and bite into each other very deeply.And counter diffusion takes place to some extent in two phase interfaces.The elemental compositions of the FeCrAl(f)/HA FGM change progressively.Ca and P contents increase gradually with immersion time increasing,and thereafter approach equilibrium.The bone-like apatite layer forms on the materials surface,which possesses benign bioactivity,and the favorable biocompatibility can provide potential firm fixation between FeCrAl(f)/HA asymmetrical FGM implants and human bone.展开更多
文摘The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reaction affect the durability and cost of PEMFCs.Most previous reports on Pt-based electrocatalyst designs have focused more on improving their activity;however,with the commercialization of PEMFCs,durability has received increasing attention.In-depth insight into the structural evolution of Pt-based electrocatalysts throughout their lifecycle can contribute to further optimization of their activity and durability.The development of in situ electron microscopy and other in situ techniques has promoted the elucidation of the evolution mechanism.This mini review highlights recent advances in the structural evolution of Pt-based electrocatalysts.The mechanisms are adequately discussed,and some methods to inhibit or exploit the structural evolution of the catalysts are also briefly reviewed.
基金supported by the National Natural Science Foundation of China(51472184 and 51472185)the Science and Technology Support Program of Hubei Province(2013BHE003)the Program for Innovative Teams of Outstanding Young and Middle-Aged Researchers in the Higher Education Institutions of Hubei Province(T201602)~~
文摘Supported and colloidal single‐atom catalysts(SACs),which possess excellent catalytic properties,are particularly important in both fundamental studies and practical applications.The progress made in the preparation methods,characterization,catalytic performances and mechanisms of SACs anchored to metal oxides,two‐dimensional materials and the surface of metal nanoclusters(NCs)are reviewed.The different techniques for SAC fabrication,including conventional solution methods based on co‐precipitation,incipient wetness co‐impregnation,and the chemical vapor deposition method,as well as the newer atom layer deposition(ALD)and galvanic replacement methods,are summarized.The main results from experimental and theoretical studies of various catalytic reactions over SACs,including oxidation reactions,hydrogenation,water gas shift,photocatalytic H2evolution and electrochemical reactions,are also discussed.Moreover,the electronic properties of the single atoms and their interactions with the supports are described to assist in understanding the origin of the high catalytic activity and selectivity of SACs.Finally,possible future research directions of SACs and their applications are proposed.
基金Project(08JJ3104) support by Hunan Provincial Natural Science Foundation of China
文摘The auto-evolved ultrafine copper powders were synlhesized via a novel electrodeposition route performed by ultrasonic dispersion of the electrolyte. The properties of the samples obtained were characterized by X-ray powder diffractometry （XRD）, transmission electron microscopy （TEM）, scanning electron microscopy （SEM） and laser size distribution analyzer （SL） respectively. The formation mechanisms of the powders and the efficiency of the elctrodeposition were discussed. The results show that the as-prepared powders are high-purity copper nanoparticles with the fcc structure taking a mixture of fishbone-like and irregular shapes When the concentration of Cu^2＋ increases from 0.03 to 0.09 mol/L, the average size of copper particles increases from 0.92 to 1.80 μm, and current efficiency of electrodeposition linearly changes from 66.5% to 91.3%.
基金Supported by National Natural Science Foundation of China（50708109 40673003） the Scientific Research Foundation for the Returned Overseas Chinese Scholars State Education Ministry（ITLXHG2009071702） the Special Fund from the State Key Laboratory of Environmental Aquatic Chemistry（09Y02ESPCR）
文摘In this paper a polyaluminum chloride solution with high Al13 content was prepared and used as raw material for preparation ofγ-Al2O3.The texture and crystalline phase of the prepared alumina samples were characterized by energy dispersive X-ray spectroscopy(EDX) ,X-ray diffraction,transmission electron microscope(TEM) and nuclear magnetic resonance(NMR) analyses.The effects of alkaline solution and calcination temperature were investigated.The results showed that alkaline solution including NH3·H2O and NaOH had little effect on the alumina sample formation.The impurities of NH4Cl and NaCl in solution can be removed through repeated washing by EDX analysis.Calcination temperature had a significant effect on alumina crystal phase.The alumina sample can transform completely toγ-Al2O3 in the subsequent heating from 600°C to 800°C.It is very interesting that Al13 can be existed inγ-Al2O3 phase even after calcinations.The results indicate that polyaluminum chloride with high Al13 content is an effective material to prepareγ-Al2O3.
基金Project(50772133) supported by the National Natural Science Foundation of ChinaProject(LA 09014) supported by Innovation Projects for Graduates of Center South University,China
文摘Eu-doped GaOOH nanoparticles with size of 5-8 nm were prepared by hydrothermal method using sodium dodecylbenzene sulfonate （SDBS） as surfactant. Eu-doped α-Ga2O3 and β-Ga2O3 were further fabricated by annealing GaOOH：Eu and then characterized by X-ray diffraction（XRD）, transmission electron microscopy （TEM） and photoluminescence （PL）. The TEM results show that monodisperse Eu^3＋-doped GaOOH nanoparticles form and then transform into Eu^3＋-doped a-Ga2O3 and β-Ga2O3 through annealing the GaOOH：Eu nanoparticles at 600 and 900℃, respectively. PL studies indicate that GaOOH：Eu has the highest intensity at 618 nm. Luminescence quenching is observed at higher Eu3＋concentration in all samples.
基金Project(50704036) supported by the National Natural Science Foundation of ChinaProject(08JJ3027) supported by the Natural Science Foundation of Hunan Province, China
文摘Magnesium oxysulfate （MgSO4·5Mg（OH）2·2H2O） flake powders with an average diameter of 2 ~tm and a thickness of 0.052 μm were prepared using magnesium sulfate and sodium hydroxide as raw materials by hydrothermal synthesis process. The composition, morphology and structural features of the hydrothermal products were examined with X-ray powder diffraction （XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The experimental results indicate that in the conditions of n（NaOH）/n（MgSO4） of 1.25, the dosage of w（Na3PO4） crystal additives of 1.0% w（MgSO4）, stirring for 5 h at 180 ℃, the morphology of MgSO4·5Mg（OH）2·2H2O products is flaky and laminar, which is a kind of complex magnesium singlecrystal. The recycling of MgSO4 mother liquor was also investigated to make a full use of the materials and reduce disposal. The results prove that there is no adverse effect on the yield and purity of the products.
文摘In this research, synthesis of magnesium oxide-multi walled carbon nanotube （MgO/MWCNTs） nanocomposite is reported using sol-gel method in which magnesium nitrate is added to aqueous solution. The structure of MWCNTs and MgO/MWCNTs composite has been characterized by analyzing the X-ray diffraction pattern （XRD）, Fourier Transform Infrared （FT-IR） spectra and Scanning Electron Microscopy （SEM） images. Experimental results indicate that the surface of purified MWCNTs sample is covered homogenously by a layered of MgO nanoparticles.
文摘Gelatins extracted from two edible insects Aspongubus viduatus （melon bug） and Agonoscelis pubescens （sorghum bug） were studied. The two insects showed 27.0 and 28.2% crude protein, respectively. Extraction of gelatin using hot water gave high yield followed by mild acid and distilled water extraction, respectively. SDS-PAGE pattern showed low molecular weight chains, and the two gelatins contained protein with molecular weight of 40 kDa as main component. The differential scanning calorimetry thermograms results confirm no difference between extraction methods concerning the extracted gelatin quality. FTIR spectra of melon and sorghum bug gelatins were similar and the absorption bands were situated in more than 6 bands in melon bug gelatin and only 6 bands in sorghum bug gelatin. Amide II bands of gelatins from both melon and sorghum bug appeared at around 1554 cm^-1, while Amide I bands （1734-1632 cmt） appeared only in melon bug method 2 （MB2） and melon bug method3 （MB3）. Microstructures of the insect gelatin examined with the scanning electron microscope showed that melon bug exhibited the finest gelatin network with very small voids. Melon bug gelatin showed finer structure with smaller protein strands and voids than sorghum bug gelatin.
基金Project(2007CB613607)supported by the National Basic Research Program of China
文摘A promising preparation method for lithium hexafluorophosphate(LiPF6)was introduced.Phosphorus pentafluoride(PF5) was first prepared using CaF2 and P2O5 at 280℃for 3 h.LiPF6 was synthesized in acetonitrile solvent by LiF and PF5 at room temperature(20-30℃)for 4 h.The synthesized LiPF6 was characterized by infrared spectrometry and X-ray diffraction(XRD). Atomic absorption and ion chromatography results show that the purity of synthesized LiPF6 reaches 99.98%.Thermal stability of self-synthesized LiPF6 was analyzed by differential thermal analysis and thermogravimetry.The results indicate that the self-synthesized LiPF6 has higher purity,lower impurity contents and better thermal stability than the commercial LiPF6.
基金Project(51274247)supported by the National Natural Science Foundation of ChinaProject(2012BAE06B00)supported by the National High Technology Research and Development Program to China+1 种基金Project(2011QNZT046)supported by the Fundamental Research Funds of Central South Universities of ChinaProject supported by Hunan Postdoctoral Scientific Program,China
文摘FeCrAl(f)/HA biological functionally gradient materials(FGMs) were successfully fabricated by the hot pressing technique.Scanning electron microscope(SEM),energy dispersive spectrometer(EDS) and bending strength test machine were utilized to characterize the microstructure,component,mechanical properties and the formation of the Ca-deficient apatite on the surface of these materials.The results indicate that an asymmetrical FeCrAl(f)/HA FGM,consolidating powders prepared by mixing HA with 3%–15%(volume fraction) is successfully prepared.Both of the matrix and FeCrAl fiber are integrated very tightly and bite into each other very deeply.And counter diffusion takes place to some extent in two phase interfaces.The elemental compositions of the FeCrAl(f)/HA FGM change progressively.Ca and P contents increase gradually with immersion time increasing,and thereafter approach equilibrium.The bone-like apatite layer forms on the materials surface,which possesses benign bioactivity,and the favorable biocompatibility can provide potential firm fixation between FeCrAl(f)/HA asymmetrical FGM implants and human bone.
