期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
电学端口串联叉指换能器连接分析 被引量:1
1
作者 刘建生 何世堂 《压电与声光》 CSCD 北大核心 2006年第4期381-383,共3页
通过巧妙的矩阵变换,避开了复杂的公式推导,成功解决了电学端口串联叉指换能器中级联的P矩阵合成问题。该方法直接从耦合模出发,根据各段换能器电学端口参量的实际关系,可综合考虑过去方法中忽略的因素,提高了计算的精度。用此方法分析... 通过巧妙的矩阵变换,避开了复杂的公式推导,成功解决了电学端口串联叉指换能器中级联的P矩阵合成问题。该方法直接从耦合模出发,根据各段换能器电学端口参量的实际关系,可综合考虑过去方法中忽略的因素,提高了计算的精度。用此方法分析倾斜指结构的宽带低插损声表面波滤波器,并和过去的近似方法计算的结果进行比较,在X-112°YLiTaO3基片上制作了滤波器,试验结果和该文方法计算的结果相吻合。 展开更多
关键词 叉指换能器 电学端口串联 P矩阵
下载PDF
压电叠堆联接方式及低频发电特点的研究 被引量:5
2
作者 党永 董维杰 +1 位作者 白凤仙 喻言 《电源学报》 2011年第4期56-62,共7页
压电发电是一种新型的振动能量收集技术。论文推导并给出了压电叠堆在33模式低频振动时输出电压和功率的数学表达式,并分析指出了输出电压和功率与压电系数、压电片个数、压电片厚度、激振力、激振频率正相关,与电极面积和介电常数负相... 压电发电是一种新型的振动能量收集技术。论文推导并给出了压电叠堆在33模式低频振动时输出电压和功率的数学表达式,并分析指出了输出电压和功率与压电系数、压电片个数、压电片厚度、激振力、激振频率正相关,与电极面积和介电常数负相关;电学串联的压电叠堆可以输出较高的开路电压;电学并联的压电叠堆可以输出较高的输出电流和功率。文中设计了压电叠堆夹持装置和振动发电实验装置,在振动频率5Hz、激振力26N的情况下得到两片电学串联叠堆和并联叠堆的最大功率分别为0.14μW和0.4μW;实测输出电压随振动频率、电阻、压电片个数、振子厚度和电极面积的变化趋势与理论预测相符。 展开更多
关键词 振动能量收集 压电叠堆 电学并联 电学串联
下载PDF
Influence of Electrolyte on ESR of Medium Voltage Wet Tantalum Capacitors 被引量:3
3
作者 刘仲娥 宋金荣 +2 位作者 陈晓静 李忆莲 桂娟 《Transactions of Tianjin University》 EI CAS 2004年第3期163-166,共4页
In this paper, the influence of working electrolyte on high-frequency electrical performance of wet tantalum capacitors is studied. Emphasis is especially put on the study of the contribution of depolariser in reducin... In this paper, the influence of working electrolyte on high-frequency electrical performance of wet tantalum capacitors is studied. Emphasis is especially put on the study of the contribution of depolariser in reducing Equivalent Series Resistance(ESR). According to the theory of depolarization in electrochemistry and the theory of cathode capacitance of electrolytic capacitor, different kinds of depolarisers are added separately into the foregone electrolyte. Then capacitors are assembled with tantalum cores dipped with the compounded electrolytes. The best depolariser and its concentration in the whole electrolyte could be selected according to the test results of the capacitance and ESR of the capacitors. The results of our experiment show that depolariser Fe 2(SO 4) 3 used in working electrolyte of 100 V/100 μF wet tantalum capacitors can help to obtain lower ESR and higher capacitance at frequency from 0.1 kHz to 100 kHz. 展开更多
关键词 depolariser electrical double layer electrical performance
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部