文中采用串联电阻的方法,解决了传统的阻抗分析仪很难满足共振激励需求的问题,研究一种具有特殊电压激励方式的压电式微固体模态谐振器等效电路。通过绘制压电谐振器的导纳圆图,分析并获得压电谐振器在共振频率附近的等效电路参数。通...文中采用串联电阻的方法,解决了传统的阻抗分析仪很难满足共振激励需求的问题,研究一种具有特殊电压激励方式的压电式微固体模态谐振器等效电路。通过绘制压电谐振器的导纳圆图,分析并获得压电谐振器在共振频率附近的等效电路参数。通过比较有无电荷放大器作为负载接入压电谐振器的实验结果,发现带有电荷放大器的压电谐振器等效电路的谐振频率从346.119 k Hz降低至344.979 k Hz。得出结论:如果电荷放大器作用于压电谐振器负载端,应该关注它对谐振频率的影响。展开更多
TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of...TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of SEM and XRD analysis show that Zn nanoparticles had a diameter of about 15-25 nm when the deposition time was 3-5 s. The UV-Vis diffuse reflectance spectra show the Zn loaded harvest light with 480-780 nm more effectively than the unloaded sample. The photocurrent response of Zn loaded TNTs electrodes were studied, the results showed that TNTs electrodes loaded with Zn nanoparti-cles has 50% increased photocurrent response under high-pressure mercury lamp irradiation compared with unloaded TNTs electrode.展开更多
Determining initial pretension values of pre-stressed cables is one of the key problems for a steel mega frame and pre-stressed composite bracing structure.Through the mechanical analysis of the composite bracing unde...Determining initial pretension values of pre-stressed cables is one of the key problems for a steel mega frame and pre-stressed composite bracing structure.Through the mechanical analysis of the composite bracing under vertical loading,the critical factors deciding the initial pretention value were found.According to these factors,a rule for the initial pretension value was put forward.The determination equations were acquired based on the principle of force equilibrium at nodes.The numerical results indicate that the internal force disequilibrium in composite bracings resulted from symmetrical load can be eliminated only in a symmetrical way,so that initial pretention values are decided only by vertical loads.The influencing coefficient leveling method,taking into account interactions between story and story,is accurate and feasible.展开更多
文摘文中采用串联电阻的方法,解决了传统的阻抗分析仪很难满足共振激励需求的问题,研究一种具有特殊电压激励方式的压电式微固体模态谐振器等效电路。通过绘制压电谐振器的导纳圆图,分析并获得压电谐振器在共振频率附近的等效电路参数。通过比较有无电荷放大器作为负载接入压电谐振器的实验结果,发现带有电荷放大器的压电谐振器等效电路的谐振频率从346.119 k Hz降低至344.979 k Hz。得出结论:如果电荷放大器作用于压电谐振器负载端,应该关注它对谐振频率的影响。
基金ACKNOWLEDGMENTS This work was supported by the Science Foundation of Chongqing Science and Technology Committee （No.CSTS2009BB4047）, and Innovative Talent Training Project, the Third Stage of ＂211 Project＂ of Chongqing University （No.S-09109）.
文摘TiO2 nanotube arrays （TNTs） electrode loaded with Zn nanoparticles was prepared by anodization and the size of Zn nanoparticle loaded on TNTs electrode was controlled by chronoamperometry deposition time. Results of SEM and XRD analysis show that Zn nanoparticles had a diameter of about 15-25 nm when the deposition time was 3-5 s. The UV-Vis diffuse reflectance spectra show the Zn loaded harvest light with 480-780 nm more effectively than the unloaded sample. The photocurrent response of Zn loaded TNTs electrodes were studied, the results showed that TNTs electrodes loaded with Zn nanoparti-cles has 50% increased photocurrent response under high-pressure mercury lamp irradiation compared with unloaded TNTs electrode.
基金Project of Ministry of Housing and Urban-Rural Development of China(No.2012-K2-28)
文摘Determining initial pretension values of pre-stressed cables is one of the key problems for a steel mega frame and pre-stressed composite bracing structure.Through the mechanical analysis of the composite bracing under vertical loading,the critical factors deciding the initial pretention value were found.According to these factors,a rule for the initial pretension value was put forward.The determination equations were acquired based on the principle of force equilibrium at nodes.The numerical results indicate that the internal force disequilibrium in composite bracings resulted from symmetrical load can be eliminated only in a symmetrical way,so that initial pretention values are decided only by vertical loads.The influencing coefficient leveling method,taking into account interactions between story and story,is accurate and feasible.
