A CMOS integrated signal processing circuit based on capacitance resonance principle whose structure is simple in capacitive sensors is designed. The waveform of output voltage is improved by choosing bootstrap refere...A CMOS integrated signal processing circuit based on capacitance resonance principle whose structure is simple in capacitive sensors is designed. The waveform of output voltage is improved by choosing bootstrap reference current mirror with initiate circuit, CMOS analogy switch and positive feedback of double-stage inverter in the circuit. Output voltage of this circuit is a symmetric square wave signal. The variation of sensitive capacitance, which is part of the capacitive sensors, can be denoted by the change of output vohage＇s frequency. The whole circuit is designed with 1.5 μm P-weU CMOS process and simulated by PSpice software. Output frequency varies from 261.05 kHz to 47. 93 kHz if capacitance varies in the range of 1PF - 15PF. And the variation of frequency can be easily detected using counter or SCU.展开更多
A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperatur...A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperature characteristic of feedback capacitor on the switching circuit output is analyzed based on the acquisition and measurement system in this paper.The characteristics of different filters are analyzed,and the corresponding filter circuit is configured according to the actual sensor bandwidth.Experiments show that the circuit can effectively filter out noises among the vibration signal and obtain vibration signal accurately.展开更多
This work presents NiS/graphene/carbon nanotube （NiS/GNS/CNT） composites as electrode material for the supercapacitor application in sea flashing signal systems. NiS nanosheets were closely anchored on the conductiv...This work presents NiS/graphene/carbon nanotube （NiS/GNS/CNT） composites as electrode material for the supercapacitor application in sea flashing signal systems. NiS nanosheets were closely anchored on the conductive GNS-CNT networks. As a result, the NiS/GNS/CNT electrode showed a high specific capacitance of 2 377 F.g^-1 at 2 mV.s^-1 and good cycling stability compared with the pure NiS （1 599F.g^-1）. The enhanced electrochemical performances are attributed to the synergetic effect between the conductive carbon and the pseudo-capacitive NiS. The high performance supercapacitor may provide application in the sea flashing signal system.展开更多
Since the gas infrared absorption spectrum source intensity of several in a thousand, it is even less linewidth is only several nanometers occupying the than the noise of light source. The signal of gas absorption is ...Since the gas infrared absorption spectrum source intensity of several in a thousand, it is even less linewidth is only several nanometers occupying the than the noise of light source. The signal of gas absorption is submerged in the noise, so it is impossible to measure the concentration of gas with spectrum absorption directly. According to the principle and parameters of difference absorption system of CH4 gas, a detection circuit consisted of the lock-in amplifier is designed. The experiment results indicated that the detection circuit can satisfy the demand of the whole system, and the limit concentration is 150×10^-6.展开更多
文摘A CMOS integrated signal processing circuit based on capacitance resonance principle whose structure is simple in capacitive sensors is designed. The waveform of output voltage is improved by choosing bootstrap reference current mirror with initiate circuit, CMOS analogy switch and positive feedback of double-stage inverter in the circuit. Output voltage of this circuit is a symmetric square wave signal. The variation of sensitive capacitance, which is part of the capacitive sensors, can be denoted by the change of output vohage＇s frequency. The whole circuit is designed with 1.5 μm P-weU CMOS process and simulated by PSpice software. Output frequency varies from 261.05 kHz to 47. 93 kHz if capacitance varies in the range of 1PF - 15PF. And the variation of frequency can be easily detected using counter or SCU.
文摘A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperature characteristic of feedback capacitor on the switching circuit output is analyzed based on the acquisition and measurement system in this paper.The characteristics of different filters are analyzed,and the corresponding filter circuit is configured according to the actual sensor bandwidth.Experiments show that the circuit can effectively filter out noises among the vibration signal and obtain vibration signal accurately.
基金Foundation item： Supported by the National Natural Science Foundation of China （Nos. 51077014, 21003028 and 51202043）： the Fundamental Research funds for the Central Universities, the Program for New Century Excellent Talents in University （NCET-10-0050）, and the Excellent Youth Foundation of Heilongjiang Province of China.
文摘This work presents NiS/graphene/carbon nanotube （NiS/GNS/CNT） composites as electrode material for the supercapacitor application in sea flashing signal systems. NiS nanosheets were closely anchored on the conductive GNS-CNT networks. As a result, the NiS/GNS/CNT electrode showed a high specific capacitance of 2 377 F.g^-1 at 2 mV.s^-1 and good cycling stability compared with the pure NiS （1 599F.g^-1）. The enhanced electrochemical performances are attributed to the synergetic effect between the conductive carbon and the pseudo-capacitive NiS. The high performance supercapacitor may provide application in the sea flashing signal system.
基金Doctorate Foundation of Hebei Province(03547020D) Natural Science Foundation of Heilongjiang Province(F0312)
文摘Since the gas infrared absorption spectrum source intensity of several in a thousand, it is even less linewidth is only several nanometers occupying the than the noise of light source. The signal of gas absorption is submerged in the noise, so it is impossible to measure the concentration of gas with spectrum absorption directly. According to the principle and parameters of difference absorption system of CH4 gas, a detection circuit consisted of the lock-in amplifier is designed. The experiment results indicated that the detection circuit can satisfy the demand of the whole system, and the limit concentration is 150×10^-6.
