In order to study the dynamic response of high-voltage transmission lines under mechanical failure, a finite element model of a domestic 500-kV high-voltage transmission line system is established. The initial equilib...In order to study the dynamic response of high-voltage transmission lines under mechanical failure, a finite element model of a domestic 500-kV high-voltage transmission line system is established. The initial equilibrium condition of the coupling system model is verified by nonlinear static analysis. The transient dynamic analysis method is proposed to analyze the variation law of dynamic response under cable or insulator rupture, and the dynamic response of structural elements next to the broken span is calculated. The results show that upper crossarm cable rupture has no effect on cable tension at adjacent suspension points, but it has a significant influence on tension in the insulator and the tower component of the upper crossarm next to the broken span. The peak tension in the conductor of the upper crossarm at the suspension point exceeds the design value under insulator rupture. Insulator rupture has no effect on the tower component of the upper crossarm, but it has a significant influence on insulator tension of the upper crossarm. Insulator rupture should be taken into account in the design of overhead transmission lines. The research results can provide a theoretical basis for the design of transmission lines.展开更多
With a live wire, line impedance could be measured by means of only passive elements such as inductors or resistors, whose techniques are well known. However, as the voltage and current used for the measurement are in...With a live wire, line impedance could be measured by means of only passive elements such as inductors or resistors, whose techniques are well known. However, as the voltage and current used for the measurement are increased, the size of the inductor or resistor being used also needs to be increased, so it would be virtually impossible to make an accurate measurement. Because of this, the authors have developed a novel measurement method for line impedance using LC resonance, which the authors describe first place. In the second place, the authors propose another line impedance. The novel method is that the rectangular wave with minimum voltage is injected into the distribution line system. By means of this method, the line capacitance and the line inductance can be measured. These proposals are confirmed by the simulation or experiment. Finally, the frequency response analysis method is to be examined, whose mechanism and results are to be presented and discussed.展开更多
Smart proton conductive metal-organic framework(MOF) membranes with dynamic remote control over proton conduction show high potential for use in advanced applications, such as sensors and bioprocesses. Here, we report...Smart proton conductive metal-organic framework(MOF) membranes with dynamic remote control over proton conduction show high potential for use in advanced applications, such as sensors and bioprocesses. Here, we report a photoswitchable proton conductive ZIF-8 membrane by coencapsulating polystyrene sulfonate and graphene quantum dots into a ZIF-8 matrix(GQDs-PSS@ZIF-8) via a solidconfined conversion process. The proton conductivity of the GQDs-PSS@ZIF-8 membrane is 6.3 times higher than that of pristine ZIF-8 and can be reversibly switched by light due to photoluminescence quenching and the photothermal conversion effect, which converts light into heat. The local increase in temperature allows water molecules to escape from the porous channels, which cuts off the proton transport pathways and results in a decrease in proton conductivity. The proton conductivity is restored when the light is off owing to regaining water molecules, which act as proton carriers, from the surroundings. The GQDs-PSS@ZIF-8 membrane responds efficiently to light and exhibits an ON/OFF ratio of 12.8. This photogated proton conduction in MOFs has potential for the development and application of MOF-based protonic solids in advanced photoelectric devices.展开更多
Semiconductor sensitized solar cells(SSSCs) are promising candidates for the third generation of cost-effective photovoltaic solar cells and it is important to develop a group of robust, environment-friendly and visib...Semiconductor sensitized solar cells(SSSCs) are promising candidates for the third generation of cost-effective photovoltaic solar cells and it is important to develop a group of robust, environment-friendly and visible-light-responsive semiconductor sensitizers. In this paper, we first synthesized bismuth vanadate(Bi VO4) quantum dots by employing facile successive ionic layer adsorption and reaction(SILAR) deposition technique, which we then used as a sensitizer for solar energy conversion. The preliminary optimised oxide SSSC showed an efficiency of 0.36%, nearly 2 orders of magnitude enhancement compared with bare Ti O2, due to the narrow bandgap absorption of Bi VO4 quantum dots and intimate contact with the oxide substrate. This result not only demonstrates a simple method to prepare Bi VO4 quantum dots based solar cells, but also provides important insights into the low bandgap oxide SSSCs.展开更多
基金The National Natural Science Foundation of China (No.50578038)the Science and Technology Project of the State Grid Corporation of China(No.SGKJ[2007]116)
文摘In order to study the dynamic response of high-voltage transmission lines under mechanical failure, a finite element model of a domestic 500-kV high-voltage transmission line system is established. The initial equilibrium condition of the coupling system model is verified by nonlinear static analysis. The transient dynamic analysis method is proposed to analyze the variation law of dynamic response under cable or insulator rupture, and the dynamic response of structural elements next to the broken span is calculated. The results show that upper crossarm cable rupture has no effect on cable tension at adjacent suspension points, but it has a significant influence on tension in the insulator and the tower component of the upper crossarm next to the broken span. The peak tension in the conductor of the upper crossarm at the suspension point exceeds the design value under insulator rupture. Insulator rupture has no effect on the tower component of the upper crossarm, but it has a significant influence on insulator tension of the upper crossarm. Insulator rupture should be taken into account in the design of overhead transmission lines. The research results can provide a theoretical basis for the design of transmission lines.
文摘With a live wire, line impedance could be measured by means of only passive elements such as inductors or resistors, whose techniques are well known. However, as the voltage and current used for the measurement are increased, the size of the inductor or resistor being used also needs to be increased, so it would be virtually impossible to make an accurate measurement. Because of this, the authors have developed a novel measurement method for line impedance using LC resonance, which the authors describe first place. In the second place, the authors propose another line impedance. The novel method is that the rectangular wave with minimum voltage is injected into the distribution line system. By means of this method, the line capacitance and the line inductance can be measured. These proposals are confirmed by the simulation or experiment. Finally, the frequency response analysis method is to be examined, whose mechanism and results are to be presented and discussed.
基金supported by the National Natural Science Foundation of China (21875212)the Key Program of National Natural Science Foundation (51632008)+2 种基金the Major R&D Plan of Zhejiang Natural Science Foundation (LD18E020001)the National Key Research and Development Program (2016YFA0200204)the Fundamental Research Funds for the Central Universities。
文摘Smart proton conductive metal-organic framework(MOF) membranes with dynamic remote control over proton conduction show high potential for use in advanced applications, such as sensors and bioprocesses. Here, we report a photoswitchable proton conductive ZIF-8 membrane by coencapsulating polystyrene sulfonate and graphene quantum dots into a ZIF-8 matrix(GQDs-PSS@ZIF-8) via a solidconfined conversion process. The proton conductivity of the GQDs-PSS@ZIF-8 membrane is 6.3 times higher than that of pristine ZIF-8 and can be reversibly switched by light due to photoluminescence quenching and the photothermal conversion effect, which converts light into heat. The local increase in temperature allows water molecules to escape from the porous channels, which cuts off the proton transport pathways and results in a decrease in proton conductivity. The proton conductivity is restored when the light is off owing to regaining water molecules, which act as proton carriers, from the surroundings. The GQDs-PSS@ZIF-8 membrane responds efficiently to light and exhibits an ON/OFF ratio of 12.8. This photogated proton conduction in MOFs has potential for the development and application of MOF-based protonic solids in advanced photoelectric devices.
基金supported by the National Basic Research Program of China(2011CBA00700)the National High Technology Research and Development Program of China(2011AA050527)the National Natural Science Foundation of China(21403247,21173228,21103197)
文摘Semiconductor sensitized solar cells(SSSCs) are promising candidates for the third generation of cost-effective photovoltaic solar cells and it is important to develop a group of robust, environment-friendly and visible-light-responsive semiconductor sensitizers. In this paper, we first synthesized bismuth vanadate(Bi VO4) quantum dots by employing facile successive ionic layer adsorption and reaction(SILAR) deposition technique, which we then used as a sensitizer for solar energy conversion. The preliminary optimised oxide SSSC showed an efficiency of 0.36%, nearly 2 orders of magnitude enhancement compared with bare Ti O2, due to the narrow bandgap absorption of Bi VO4 quantum dots and intimate contact with the oxide substrate. This result not only demonstrates a simple method to prepare Bi VO4 quantum dots based solar cells, but also provides important insights into the low bandgap oxide SSSCs.
