地面瞬变电磁资料解释精度的进一步提高一直是该方法研究的重点内容。以瞬变电磁烟圈效应扩散理论为依据,通过双倍旅程和平均速度概念建立了时深转换方法,以克服瞬变电磁采用简单经验公式计算实测数据时可能出现的深度翻转问题;以三维...地面瞬变电磁资料解释精度的进一步提高一直是该方法研究的重点内容。以瞬变电磁烟圈效应扩散理论为依据,通过双倍旅程和平均速度概念建立了时深转换方法,以克服瞬变电磁采用简单经验公式计算实测数据时可能出现的深度翻转问题;以三维地震成果数据获取的9号煤层深度作为电性标志层校正标准,采用视电阻率微分极值点识别该电性标志层,通过比值法计算相应瞬变电磁测点的深度校正系数 K 值,然后采用内插方法得到测区任意点 K 值,以校正瞬变电磁在计算探测深度时出现的偏差。通过堡子矿钻孔ZKB1-1和ZK201电阻率测井资料分别建立了正演理论模型,计算了瞬变电磁响应,并和钻孔旁瞬变电磁实测数据的视电阻率微分极值对比,结果表明,两者基本一致,能够准确识别电性分界面。以矿区256线和344测线为例说明了电性标志层识别效果,计算了堡子矿全区深度校正系数,对该区资料进行了精细处理,圈定了工作区奥灰顶低阻异常区,以视电阻率为基本参数,分析评价了该区的地层赋水性强弱。根据奥灰顶视电阻率平面图以及地表径流,结合断层构造的分布特征,确定了导水通道存在及位置。最后通过钻孔验证表明:该方法处理探测深度精度误差小于5%,达到了对地面瞬变电磁资料的精细解释。展开更多
To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the con...To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.展开更多
Sodium-ion batteries are economical and environmentally sustainable energy storage batteries.Among them,β-NaMnO_(2),a promising sodium-ion cathode material,is a manganese-based oxide with a corrugated laminar structu...Sodium-ion batteries are economical and environmentally sustainable energy storage batteries.Among them,β-NaMnO_(2),a promising sodium-ion cathode material,is a manganese-based oxide with a corrugated laminar structure,which has attracted significant attention due to its structural robustness and relatively high specific capacity.However,it has short cycle life and poor rate capability.To address these issues,Ti atoms,known for enhancing structural stability,and Cu atoms,which facilitate desodiation,were doped intoβ-NaMnO_(2) by first-principles calculation and crystal orbital Hamilton population(COHP)analysis.β-NaMn_(0.8)Ti_(0.1)Cu_(0.1)O_(2) exhibits a notable increase in reversible specific capacity and remarkable rate properties.Operating at a current density of 0.2C(1C=219 mA·g^(–1))and within a voltage range of 1.8–4.0 V,the modified material delivers an initial discharge capacity of 132 mAh·g^(–1).After charge/discharge testing at current densities of 0.2C,0.5C,1C,3C,and 0.2C,the material still maintains a capacity of 110 mA h·g^(–1).The doping of Ti atoms slows down the changes in the crystal structure,resulting in only minimal variation in the lattice constant c/a during the desodiation process.Mn and Cu engage in reversible redox reactions at voltages below 3.0 V and around 3.5 V,respectively.The extended plateau observed in the discharge curve below 3.0 V signifies that Mn significantly contributes to the overall battery capacity.This study provides insights into modifyingβ-NaMnO_(2) as a cathode material,offering experimental evidence and theoretical guidance for enhancing battery performance in Na-ion batteries.展开更多
In this paper,1-butyl-3-methylimidazole tetrafluoroborate([BMIM]BF4)is used as corrosion inhibitor.Polyacrylonitrile(PAN)is used to load the corrosion inhibitor.PAN/[BMIM]BF4 hybrid nanofibers are successfullysynthesi...In this paper,1-butyl-3-methylimidazole tetrafluoroborate([BMIM]BF4)is used as corrosion inhibitor.Polyacrylonitrile(PAN)is used to load the corrosion inhibitor.PAN/[BMIM]BF4 hybrid nanofibers are successfullysynthesized by electrospinning technology.The alkyd varnish is coated on the fiber membrane to prepare a compositecoating,and then a series of tests are carried out on the self-healing and anticorrosive performance of the compositecoating.It is observed by scanning electron microscope that the fiber morphology is stable and there is no bead-likestructure.The composition of the composite fiber is analyzed by Fourier infrared spectroscopy,and it is confirmed thatthe hybrid nanofiber was successfully prepared.3D laser confocal scanning microscope was used to observe thecorrosion morphology and profile of the carbon steel.The composite coating shows good self-healing performance.[BMIM]BF4 can form a protective film on the surface of the bare carbon steel substrate through physical adsorption orchemical adsorption in an alkaline environment.Electrochemical impedance spectroscopy was tested and analyzed.It isfound that the maximum corrosion inhibition efficiency of the coating is 88.5%in 3.5 wt.%alkaline NaCl solution.Compared with the blank coating without nanofibers,the composite fiber varnish composite coating exhibits good selfhealingand anti-corrosion properties.展开更多
The high-temperature oxidation resistance of the nickel superalloy prepared by the laser powder bed fusion(LPBF)has been significantly increased as a result of in-situ formation of a thermal barrier layer(α-Al_(2)O_(...The high-temperature oxidation resistance of the nickel superalloy prepared by the laser powder bed fusion(LPBF)has been significantly increased as a result of in-situ formation of a thermal barrier layer(α-Al_(2)O_(3)+CaMoO4)during oxidative annealing of surface layers modified by electric spark treatment(EST).The reactive EST of the LPBF-built items based on nickel EP741NP alloy was carried out with low-melting Al−12%Si,Al−6%Ca−0.6%Si and Al−7%Ca−1%Mn electrodes.It was found that under EST done by Al−7%Ca−1%Mn electrode an intermetallic(β-NiAl+γ'-Ni3Al)15μm-thick layer reinforced by spherical oxide(CaMe)O nanoparticles was formed.Formation of that structure increases the wear resistance of LPBF nickel superalloy by 4.5 times.Further oxidative annealing at 1000°C leads to a formation of continuous two-layered coating with an inner layer ofα-Al_(2)O_(3) and an outer layer of CaMoO4,which together act as an effective barrier preventing the diffusion of oxygen into the bulk of the superalloy.展开更多
The reservoir pore structure controls the reservoir quality and resistivity response of hydrocarbon-bearing zones and thus, critically affects logging interpretation. We use petrophysical data in three types of reserv...The reservoir pore structure controls the reservoir quality and resistivity response of hydrocarbon-bearing zones and thus, critically affects logging interpretation. We use petrophysical data in three types of reservoir with different pore structure characteristics to show that the complexity of pore structure had a significant effect on the effective porosity and permeability regardless of geological factors responsible for the formation of pore structure. Moreover,, the distribution and content of conductive fluids in the reservoir varies dramatically owing to pore structure differences, which also induces resistivity variations in reservoir rocks. Hence, the origin of low-resistivity hydrocarbon-bearing zones, except for those with conductive matrix and mud filtrate invasion, is attributed to the complexity of the pore structures. Consequently, reservoir-specific evaluation models, parameters, and criteria should be chosen for resistivity log interpretation to make a reliable evaluation of reservoir quality and fluids.展开更多
文摘地面瞬变电磁资料解释精度的进一步提高一直是该方法研究的重点内容。以瞬变电磁烟圈效应扩散理论为依据,通过双倍旅程和平均速度概念建立了时深转换方法,以克服瞬变电磁采用简单经验公式计算实测数据时可能出现的深度翻转问题;以三维地震成果数据获取的9号煤层深度作为电性标志层校正标准,采用视电阻率微分极值点识别该电性标志层,通过比值法计算相应瞬变电磁测点的深度校正系数 K 值,然后采用内插方法得到测区任意点 K 值,以校正瞬变电磁在计算探测深度时出现的偏差。通过堡子矿钻孔ZKB1-1和ZK201电阻率测井资料分别建立了正演理论模型,计算了瞬变电磁响应,并和钻孔旁瞬变电磁实测数据的视电阻率微分极值对比,结果表明,两者基本一致,能够准确识别电性分界面。以矿区256线和344测线为例说明了电性标志层识别效果,计算了堡子矿全区深度校正系数,对该区资料进行了精细处理,圈定了工作区奥灰顶低阻异常区,以视电阻率为基本参数,分析评价了该区的地层赋水性强弱。根据奥灰顶视电阻率平面图以及地表径流,结合断层构造的分布特征,确定了导水通道存在及位置。最后通过钻孔验证表明:该方法处理探测深度精度误差小于5%,达到了对地面瞬变电磁资料的精细解释。
文摘To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.
基金National Key R&D Program of China(2022YFB3807700)National Natural Science Foundation of China(22133005,22103093)+4 种基金Science and Technology Commission of Shanghai Municipality(21ZR1472900,22ZR1471600,23ZR1472600)Youth Innovation Promotion Association CAS(2022251)Shanghai Super Post-Doctor Incentive Program(2022665)China Postdoctoral Science Foundation(2023M733621)Shanghai Explorer Program(Batch I)(23TS1401500)。
文摘Sodium-ion batteries are economical and environmentally sustainable energy storage batteries.Among them,β-NaMnO_(2),a promising sodium-ion cathode material,is a manganese-based oxide with a corrugated laminar structure,which has attracted significant attention due to its structural robustness and relatively high specific capacity.However,it has short cycle life and poor rate capability.To address these issues,Ti atoms,known for enhancing structural stability,and Cu atoms,which facilitate desodiation,were doped intoβ-NaMnO_(2) by first-principles calculation and crystal orbital Hamilton population(COHP)analysis.β-NaMn_(0.8)Ti_(0.1)Cu_(0.1)O_(2) exhibits a notable increase in reversible specific capacity and remarkable rate properties.Operating at a current density of 0.2C(1C=219 mA·g^(–1))and within a voltage range of 1.8–4.0 V,the modified material delivers an initial discharge capacity of 132 mAh·g^(–1).After charge/discharge testing at current densities of 0.2C,0.5C,1C,3C,and 0.2C,the material still maintains a capacity of 110 mA h·g^(–1).The doping of Ti atoms slows down the changes in the crystal structure,resulting in only minimal variation in the lattice constant c/a during the desodiation process.Mn and Cu engage in reversible redox reactions at voltages below 3.0 V and around 3.5 V,respectively.The extended plateau observed in the discharge curve below 3.0 V signifies that Mn significantly contributes to the overall battery capacity.This study provides insights into modifyingβ-NaMnO_(2) as a cathode material,offering experimental evidence and theoretical guidance for enhancing battery performance in Na-ion batteries.
基金Projects(42076039,42106042)supported by the National Natural Science Foundation of ChinaProject(202165004)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(JC12022106)supported by 2022 Innovation Project for Young Scientific and Technological Talents in Basic Science Research,China。
文摘In this paper,1-butyl-3-methylimidazole tetrafluoroborate([BMIM]BF4)is used as corrosion inhibitor.Polyacrylonitrile(PAN)is used to load the corrosion inhibitor.PAN/[BMIM]BF4 hybrid nanofibers are successfullysynthesized by electrospinning technology.The alkyd varnish is coated on the fiber membrane to prepare a compositecoating,and then a series of tests are carried out on the self-healing and anticorrosive performance of the compositecoating.It is observed by scanning electron microscope that the fiber morphology is stable and there is no bead-likestructure.The composition of the composite fiber is analyzed by Fourier infrared spectroscopy,and it is confirmed thatthe hybrid nanofiber was successfully prepared.3D laser confocal scanning microscope was used to observe thecorrosion morphology and profile of the carbon steel.The composite coating shows good self-healing performance.[BMIM]BF4 can form a protective film on the surface of the bare carbon steel substrate through physical adsorption orchemical adsorption in an alkaline environment.Electrochemical impedance spectroscopy was tested and analyzed.It isfound that the maximum corrosion inhibition efficiency of the coating is 88.5%in 3.5 wt.%alkaline NaCl solution.Compared with the blank coating without nanofibers,the composite fiber varnish composite coating exhibits good selfhealingand anti-corrosion properties.
基金supported by the Ministry of Science and Higher Education of the Russian Federation under State Research Assignment(No.0718-2020-0034)Development Program of MISIS(No.K7-2023-009)within the Framework Strategic Academic Leadership Program"Priority-2030".
文摘The high-temperature oxidation resistance of the nickel superalloy prepared by the laser powder bed fusion(LPBF)has been significantly increased as a result of in-situ formation of a thermal barrier layer(α-Al_(2)O_(3)+CaMoO4)during oxidative annealing of surface layers modified by electric spark treatment(EST).The reactive EST of the LPBF-built items based on nickel EP741NP alloy was carried out with low-melting Al−12%Si,Al−6%Ca−0.6%Si and Al−7%Ca−1%Mn electrodes.It was found that under EST done by Al−7%Ca−1%Mn electrode an intermetallic(β-NiAl+γ'-Ni3Al)15μm-thick layer reinforced by spherical oxide(CaMe)O nanoparticles was formed.Formation of that structure increases the wear resistance of LPBF nickel superalloy by 4.5 times.Further oxidative annealing at 1000°C leads to a formation of continuous two-layered coating with an inner layer ofα-Al_(2)O_(3) and an outer layer of CaMoO4,which together act as an effective barrier preventing the diffusion of oxygen into the bulk of the superalloy.
基金supported by China national petroleum corporation science and technology development projects(No.2011D_4101)
文摘The reservoir pore structure controls the reservoir quality and resistivity response of hydrocarbon-bearing zones and thus, critically affects logging interpretation. We use petrophysical data in three types of reservoir with different pore structure characteristics to show that the complexity of pore structure had a significant effect on the effective porosity and permeability regardless of geological factors responsible for the formation of pore structure. Moreover,, the distribution and content of conductive fluids in the reservoir varies dramatically owing to pore structure differences, which also induces resistivity variations in reservoir rocks. Hence, the origin of low-resistivity hydrocarbon-bearing zones, except for those with conductive matrix and mud filtrate invasion, is attributed to the complexity of the pore structures. Consequently, reservoir-specific evaluation models, parameters, and criteria should be chosen for resistivity log interpretation to make a reliable evaluation of reservoir quality and fluids.
