期刊文献+
共找到8篇文章
< 1 >
每页显示 20 50 100
挠性接头细颈的电感测量法(英文)
1
作者 赵慧 陈祝 《中国惯性技术学报》 EI CSCD 2008年第3期371-374,共4页
针对挠性接头细颈壁厚测量时所遇到的壁薄易变形,测量空间狭小等问题,在介绍了目前几种测量接头壁厚方法及其优缺点后,重点阐述了双测头电感测量法的工作原理,测量设备的结构装置,对于测量结果采用和差演算法来有效消除测杆变形这项主... 针对挠性接头细颈壁厚测量时所遇到的壁薄易变形,测量空间狭小等问题,在介绍了目前几种测量接头壁厚方法及其优缺点后,重点阐述了双测头电感测量法的工作原理,测量设备的结构装置,对于测量结果采用和差演算法来有效消除测杆变形这项主要误差来源。在分析整套设备的各个误差分量后得出:该装置测量精度达到了1um,该设备具有结构简单,易于实现,测量速度快的优点。另外还可以通过更换相对应的测量夹具分别测量内外接头细颈的壁厚及其锥度。 展开更多
关键词 挠性接头 壁厚测量 电感测量法 和差演算
下载PDF
实用的电感测量法 被引量:1
2
作者 郑国川 《家庭电子》 1996年第10期8-8,共1页
在家电维修中,电感的测量是极为重要的,不仅有利于准确判断电感元件妤坏,而且便于自制和仿制。例如音箱分频器的电感量,开关变压器绕组的电感量以及行输出变压器、偏转线圈的电感量等等。这些元件的电感量直接关系到其性能好坏,维修时... 在家电维修中,电感的测量是极为重要的,不仅有利于准确判断电感元件妤坏,而且便于自制和仿制。例如音箱分频器的电感量,开关变压器绕组的电感量以及行输出变压器、偏转线圈的电感量等等。这些元件的电感量直接关系到其性能好坏,维修时通常靠测直流电阻判断其好坏,但这是极不可靠的方法。因为一只电感(例如开关变压器初级线圈)即使圈数完全相同,其电感量误差也相当大。电感量的测量有专用的仪器,如数字式电感电容测量仪。但这些仪器不但成本高,其测试频率也不合要求。 展开更多
关键词 电感测量法 电感 电感
下载PDF
电感测量法判断配电变压器接线组别
3
作者 严卫国 《农村电工》 2013年第10期22-22,共1页
我们经常接触的10 kV 降压配电变压器接线组别有 Y,yn0和D,yn11,如何用一种简单的测试方法判断出其可能是哪种接线组别呢?笔者通过用数字电感表对10余台10 kV降压变压器高压侧电感量的测量,发现这两种10 kV 配电变压器高压侧绕组... 我们经常接触的10 kV 降压配电变压器接线组别有 Y,yn0和D,yn11,如何用一种简单的测试方法判断出其可能是哪种接线组别呢?笔者通过用数字电感表对10余台10 kV降压变压器高压侧电感量的测量,发现这两种10 kV 配电变压器高压侧绕组的接线组别与电感量的大小存在一定的规律性,可用于区分这两种接线组别的配电变压器。 展开更多
关键词 配电变压器 接线组别 电感测量法 降压变压器 测试方法 数字电感 电感 高压侧
下载PDF
精密弹性元件中薄壁细颈的测量研究
4
作者 徐玉春 赵万生 +1 位作者 赵家齐 刘晋春 《航空计测技术》 1999年第6期10-12,共3页
介绍了国内精密弹性元件中薄壁细颈的测量技术现状,分析了现有方法存在的问题,进而提出了电感测量方法,研制了相应的测量装置,能够实现精密弹性元件中薄壁细颈的在线测量。
关键词 弹性元件 细颈 电感测量法 薄壁 在线测量
下载PDF
彩电电源开关变压器损坏的判断
5
作者 蒋建军 《家电维修》 2004年第3期13-13,共1页
开关电源故障在彩电故障中所占的比例最大,是广大检修人员公认的检修难点,由开关变压器损坏引发的故障更让人怵头。这是为什么呢?因为开关变压器损坏率极低,损坏情况却难以判定,加上配件不足,常使检修陷入两难。
关键词 彩电 电源开关 开关电源 开关变压器 电感测量法 万用表 故障 检修 电感并联法
下载PDF
Liquid holdup measurement with double helix capacitance sensor in horizontal oil-water two-phase flow pipes 被引量:6
6
作者 翟路生 金宁德 +1 位作者 高忠科 王振亚 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2015年第1期268-275,共8页
This paper presents the characteristics of a double helix capacitance sensor for measurement of the liquid holdup in horizontal oil–water two-phase flow. The finite element method is used to calculate the sensitivity... This paper presents the characteristics of a double helix capacitance sensor for measurement of the liquid holdup in horizontal oil–water two-phase flow. The finite element method is used to calculate the sensitivity field of the sensor in a pipe with 20 mm inner diameter and the effect of sensor geometry on the distribution of sensitivity field is presented. Then, a horizontal oil–water two-phase flow experiment is carried out to measure the response of the double helix capacitance sensor, in which a novel method is proposed to calibrate the liquid holdup based on three pairs of parallel-wire capacitance probes. The performance of the sensor is analyzed in terms of the flow structures detected by mini-conductance array probes. 展开更多
关键词 Horizontal oil–water two-phase flow Liquid holdup measurement Double helix capacitance sensor Flow pattern
下载PDF
Determination of potassium content as principal components in pyrotechnic compositions used for fireworks and firecrackers based on inductively coupled plasma optical emission spectrometric approach (ICP-OES)
7
作者 Xiao Huan-xin Wu Jun-yi 《International Journal of Technology Management》 2014年第2期87-90,共4页
Inductively coupled plasma optical emission spectrometric approach(1CP-OES) is used to determine the potassium content as principal component in pyrotechnic compositions used for fireworks and firecrackers. Element ... Inductively coupled plasma optical emission spectrometric approach(1CP-OES) is used to determine the potassium content as principal component in pyrotechnic compositions used for fireworks and firecrackers. Element of potassium is conunonly found in potassium nitrate and potassium perchlorate in pyrotechnic compositions in fireworks and firecrackers. Statistical analysis shows that potassium nitrate content in pyrotechnics is between 10% to 60% and the potassium perchlorate content is between 20% to 70%,which counted in the content of potassium element is between 4% to 23%. Concept of this method: considering the weight of the sample is 400rag,constant volume is 1L and the concentration of potassium is between 10 mg/L to 90 mg/L in sample solution, the determination scope of the method for the potassium content would be between 1% to 23%.Further experiments proved that the fitting correlation coefficient of potassium calibration curve is 0.9997 or higher, recovery is 89.15%-100.23%.The allowable differential value is 0.4% between two single tests under repeatable conditions. This method can completely satisfy the requirements of the fireworks and firecrackers industry with high accuracy and good precision. 展开更多
关键词 fireworks and firecrackers pyrotechnic compositions principal component POTASSIUM content DETERMINATION inductively coupled plasma optical emission spectrometric approach ICP-OES.
下载PDF
Determination of magnesium and aluminum content as principal components in pyrotechnic compositions used for fireworks and firecrackers based on inductively coupled plasma optical emission spectrometric approach (ICP-OES)
8
作者 Wu Jun-yi Xiao Huan-xin 《International Journal of Technology Management》 2014年第1期82-86,共5页
Inductively coupled plasma optical emission spectrometric approach(ICP-OES)is used to determine the magnesium and aluminum content as principal components in pyrotechnic compositions used for fireworks and firecrack... Inductively coupled plasma optical emission spectrometric approach(ICP-OES)is used to determine the magnesium and aluminum content as principal components in pyrotechnic compositions used for fireworks and firecrackers. Elements of magnesium and aluminum are commonly found in aluminum powder or magnesium-aluminum alloy powder in pyrotechnic compositions in fireworks and firecrackers. Statistical analysis shows that the magnesium content in pyrotechnics is between 8% to 30% and the aluminum content is between 8% to 35%(roughly).Concept of this method: suppose the weight of the sample is 400rag,constant volume is IL and the concentlation of magnesium and aluminum is between 12mg/L to 160mg/L in sample solution, the determination scope of the method for magnesium and aluminum content would be between 3% to 40%.Further experiments proved that the fitting correlation coefficient of the magnesium calibration curve is 0.9999 or higher, recovery is 101.01% -101.96%.The fitting correlation coefficient of the aluminum calibration curve is 0.9999 or higher, recovery is 99.36%-103.07%. The allowable differential value is 0.4% between two single tests under repeatable conditions. This method can completely satisfy the requirements of the fireworks and firecrackers industry with high accuracy and good precision. 展开更多
关键词 fireworks and firecrackers:pyrotechnic compositions principal components MAGNESIUM ALUMINUM CONTENT determination induct ively coupled plasma optical emission spectrometric approach ICP-OES.
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部