电机装配过程中多余物控制研究

在国家政策支持以及技术进步等因素影响下,新能源汽车市场呈现火爆发展的态势,作为新能源汽车核心部件的 电机是由若干个零部件组装而成,电机装配主要包含三部分内容,即转子装配、定子装配以及电机组装。在这三个环节中, 难免会产生多余物,不仅浪费了资源、降低了装配效率,严重情况甚至可能降低相关性能及损害电机,因此控制多余物成为 了电机装配过程中非常重要的一个环节。

高压电机启动方式分析

本文介绍了三相交流异步电动机和同步电动机的几种启动方式,结合了各种启动方式的工程经验;例如三相交流异步电动机机的定子绕组启动电流参数、三相交流异步电动机机负序分量限制、三相交流同步电动机的启动过程和参数;从理论上分析了电机的过载和三相不对称状态;三相同步电机的投励失败对电机的不对称的影响;从技术角度分析了影响高压电机正常启动的故障原因:三相不对称不平衡状态,并基于三相交流电机的旋转磁场做了理论分析。

发电机组静态并联应用

介绍了发电机组并联方式、普通并联与静态并联的区别、静态并联的应用场合、静态并联的优势、发电机组并联控制器的静态并联模式主要参数设置和工作过程。

发电机组多机并联与多路市电并网的应用

介绍了发电机组控制方式、单机控制和多机并联控制优缺点、发电机并联、市电并网、发电机并联与市电并网应用时的注意事项、发电机组多机并联与多路市电并网。

胶的归口研究

本篇主要从胶的种类及应用出发，对制造电机过程中使用的胶进行总结，为今后实际生产中胶的进行归口分类，方便实际生产的应用。

Performance of Marine Power Plant Given Generator, Main and Distribution Switchboard Failures

Power generation is one of the most essential functions of any plant for continuous functioning without any interruption. A marine power plant （MPP） is the same section. In the present paper, the authors have tried to find the various reliability characteristics of an MPR A marine power plant which is a composition of two generators and in which one of them is located at the stern and another at the bow, both associated to the main switchboard （MSB）. The distribution switchboards （DSB） receive power from the MSB through cables and their respective junctions. Given that arrangement, a working based transition state diagram has been generated. With the help of the Markov process, a number of intro-differential equations are formed and solved by Laplace transform. Various reliability characteristics are calculated and discussed with the help of graphs.

Recovering metals from printed circuit board scrap by a mechanical separation process

A mechanical separation process was developed for recovering metals from printed circuit board(PCB) scrap;it included three steps:impact crushing,sieving and fluidization separation.The mechanism of the technique was based on the difference in the crushabilities of metallic and nonmetallic materials in the PCBs that led to the concentrated distribution of metals in particles of larger sizes and nonmetals mostly in particles of smaller sizes.It was found that crushed PCB particles from 0.125 mm to 1.000 mm contained about 80% of metals in the PCBs.Metals acquired satisfactory liberation in particles smaller than 0.800 mm.The crushed PCB particles were sieved into fractions of different size ranges.Each fraction separately went through a gas-solid fluidized bed operating at a selected optimal gas velocity for the specific size range.Approximately 95% of metals in printed circuit board particles from 0.125 mm to 0.800 mm was recovered by the gas-fluidized bed separator at the selected optimal gas velocity.However,separation of metals from particles smaller than 0.125 mm was not satisfactory.Further study is needed on metal recovery from fine particles.

Simulation study on the starting characteristics of a kind of improved direct torque control system

Analyzed working principle and starting process of asynchronous motor direct torque control system. In order to solve the problem of serious fluctuation of starting current in traditional control scheme, the author puts forward a new kind of starting method which can limit voltage value to achieve the goal of reducing fluctuation of the current by increasing zero voltage vectors during the stage of starting. The author has also carried on simulation study on the system, and the result of simulation study shows that this method is effectual.

Losses Calculation of an Aerospace Retraction Wheel Motor with Regarding to Electromagnetic-Field Analysis Investigation

A 3-D FEA （finite element analysis） transient and steady-state design proposal for high-speed with Nd-Fe-Br （reversible） magnets in aerospace application will be examined under design considerations of n = 12,000 rpm, short-duty, sinusoidal drive, low cogging, high efficiency at peak torque, and etc. for an ARWM （aerospace retraction wheel motor）. In construction, the PMs （permanent magnets） fixed on the rotor core which is surface-mOunted magnets retained by a carbon-fiber bandage. Redundant windings, resistant to fault propagation have accounted. Besides, an axial water-jacket housing without end-cap cooling has involved. All performed characteristic performances of the correlated ARWM will verify by comparison through 2-D and 3-D FEA results. In this paper, design process has dealing with determination of various kinds of losses such as electromagnetic and mechanical losses. In terms of both classified losses, copper, stator back iron, stator tooth, PM, rotor back iron, air-friction and sleeve losses were calculated. The 3-D end-winding effects were included in the modeled ARWM by the authors.

Cold stamping for AZ31B magnesium alloy sheet of cell phone house

Electric product house of magnesium alloy sheet is usually obtained by warm stamping owing to its poor plasticity and formability at room temperature.The formability of AZ31B magnesium alloy sheet can be improved by repeated unidirectional bending(RUB)process through control of(0002)basal texture.Compared with as-received sheet,the Erichsen value(IE)of the sheet underwent RUB process increases to 5.90 from 3.53 at room temperature.It is also confirmed that cell phone houses could be stamped successfully in crank press with AZ31B magnesium alloy sheets underwent RUB process.It provides an alternative to the electronics industry in the application of magnesium alloys.

The Domination for Evaluation of the Contingent Claims by Nonlinear Generator

In this paper,through applying the result of backward stochastic differential equations,it investigates a domination for pricing of the contingent claims by the use of nonlinear infinitesimal generator of process X. This domination provides a guide for valuing the price of the position on the financial market.

Replacement of Diesel Generator Sets in Isolated Communities with More Efficient Biomass Combustion Process

Electrical power supply to communities isolated from urban areas is typically complex and expensive. Their geographical situation and the lack of infrastructure and qualified workforce impede the provision of electricity. Many are the sources of energy available, but few are appropriate or sustainable. Combustion of diesel fuel is a good technical solution; however, it is neither economic nor environmentally tenable. This paper presents the advantages of using biomass as an energy source, along with its potential increase in efficiency when steam is generated in specific circumstances of temperature and pressure.

Experimental Investigation of Electric Drive Dynamics

Induction motor is used in many applications to drive an electromechanical system. Transients of the motor torque and speed are outlined by the inertia of rotating rotor. The paper deals with influence of rotor inertia to transients of motor speed. The method of speed control measurement and experimental equipment is discussed. Simulation and experimental results are compared.

An electricity price model with consideration to load and gas price effects

Some characteristics of the electricity load and prices are studied, and the relationship between electricity prices and gas (fuel) prices is analyzed in this paper. Because electricity prices are strongly dependent on load and gas prices, the authors constructed a model for electricity prices based on the effects of these two factors; and used the Geometric Mean Reversion Brownian Motion (GMRBM) model to describe the electricity load process, and a Geometric Brownian Motion(GBM) model to describe the gas prices; deduced the price stochastic process model based on the above load model and gas price model. This paper also presents methods for parameters estimation, and proposes some methods to solve the model.

Research and Development of Condensate Water Fined Processing Control System Based on FCS

This paper briefly states the features and advantages of FCS （fieldbus control system）. In view of condensate water fined processing system of domestic 600 MW supercritical coal-fired generating units, it designed and developed a FCS for entirely process control, designed computer monitoring software and organized network monitor the change of data. At the same time, making the simulation device of the system, the FCS control system scheme is implemented on this device. It is verified by practice that the system control technology is advanced, safe, reliable and operation well. It provides a complete project for automation technology upgrade program in power plant. In addition, this device can be used in the power industry technical personnel training and teaching of colleges and universities. It is worth promotion and reference.

The Slot Number and Air-Gap Effect on Performance of the High-Speed Brushless Permanent Magnet Motor

This paper describes the key issues of high-speed brushless permanent magnet motor design, such as rotor design, stator design, and determination of the main dimensions, and the overall design process was given. In this paper, a two-pole three-phase high-speed brushless PM （permanent magnet） motor with ratings air-gap length and stator slot number on the motor performance of 7.5 kW, 30,000 rpm is designed, and the effect of the different was analyzed. The results show that larger number of stator slot decreases the rotor loss and the rotor torque ripple. Larger air-gap length decreases the rotor loss.

Complex network theory-based condition recognition of electromechanical system in process industry

In order to recognize the different operating conditions of a distributed and complex electromechanical system in the process industry,this work proposed a novel method of condition recognition by combining complex network theory with phase space reconstruction.First,a condition-space with complete information was reconstructed based on phase space reconstruction,and each condition in the space was transformed into a node of a complex network.Second,the limited penetrable visibility graph method was applied to establish an undirected and un-weighted complex network for the reconstructed condition-space.Finally,the statistical properties of this network were calculated to recognize the different operating conditions.A case study of a real chemical plant was conducted to illustrate the analysis and application processes of the proposed method.The results showed that the method could effectively recognize the different conditions of electromechanical systems.A complex electromechanical system can be studied from the systematic and cyber perspectives,and the relationship between the network structure property and the system condition can also be analyzed by utilizing the proposed method.

Thick SU8 microstructures prepared by broadband UV lithography and the applications in MEMS devices

Thick SU8 microstructures with high aspect ratio and good side wall quality were fabricated by ultraviolet （UV） lithography, and the processing parameters were comprehensively studied. It proves that the adhesion of SU8 on silicon （Si） substrates is influenced by Si-OH on the surface, and can be improved by the HF treatment. Cracks and de- lamination are caused by large internal stress during fabrication process, and are significantly influenced by soft bake and post-exposure bake processes. The internal stress is reduced by a low post-exposure bake exposure tem- perature of 85 ℃ for 40 rain. A three-step soft bake enhances the reflowing ofSU8 photoresist, and results in uni- form surface and less air bubbles. The vertical side wall is obtained with the optimized exposure dose of 800 mJ/cm2 for the thickness of 160 μm. Using the optimized fabrication process combined with a proper structure design, dense SU8 micro pillars are achieved with the aspect ratio of 10 and the taper angle of 89.86°. Finally, some possible ap- plications of SU8 in micro-electromechanical system （MEMS） device are developed and demonstrated.

Effect of esterification reaction of citric acid and ethylene glycol on the formation of multi-shelled cobalt oxide powders with superior electrochemical properties

In this study, for the first time, polymeric precursors have been used in the preparation of yolk-shell powders using a large-scale spray drying process. An esterification reaction between the carboxyl group of citric acid and the hydroxyl group of ethylene glycol inside the droplet produced organic polymers during the drying process of the droplet. During the spray drying process, the polymeric precursors enabled the formation of multi-shell cobalt oxide yolk- shell powders with superior electrochemical properties. The maximum number of shells of the particles in the yolk-shell powders post-treated at 300, 400, and 500 ℃ were six, five, and four, respectively. The initial discharge capacities of the cobalt oxide yolk-shell powders post-treated at 300, 400, and 500 ℃ were 1,188, 1,331, and 1,110 mAh·g^-1, and their initial charge capacities were 868, 1,005, and 798 mAh·g^-1, respectively. The discharge capacities of the powders post- treated at 300, 400, and 500 ℃ after 100 cycles were 815, 958, and 670 mAh·g^-1, respectively and their corresponding capacity retentions measured after the first cycles were 92%, 93%, and 82%, respectively. The pure phase Co3O4 yolk-shell powders post-treated at 400 ℃ had low charge transfer resistance and high lithium-ion diffusion rate.

Modeling and simulation of non-linear dynamic process of the induction motor system with fluctuating potential loads

The induction motor system with fluctuating potential loads is a non-linear complex electro-mechanical system.With beam pumping motors as an example,this paper proposes a multiple factor non-linear mathematical model to study the operating performance of the induction motor system.This model consists of non-linear time varying electromagnetic field equations,mechanical wave equations of sucker rods and non-linear coupling equation of reducer and four-bar linkage.The equations are numerically solved by combining time-step finite element method(TS-FEM),finite difference method(FDM),a linear dimension reduction method and the Newton-Raphson method.Simulation results,which are validated by experiments,reveal the influence of the fluctuating potential load on magnetic field distributions,stator and rotor currents,the input power and the power factor.The model and simulation results provide theoretical and technical supports for subsequent researches on model simplification and energy saving technologies.