用电模拟法研究空心砖的最佳孔型

用电模拟法研究空心砖的最佳孔型长沙市新型墙体材料办公室刘学武长沙市交通学院姚志坚严定法墙体材料的改革是新形势下建材工业发展的基本方针，然而，我国的空心砖生产和利用发展缓慢。据统计，全国每年的空心砖产量仅占砖产量的４％左右，而国外空心砖发展很快，一般工...

电模拟法在工程计算中的应用

在伟大的技术革新、技术革命运动中,群众创造出无数的先进技术和先进经验。模拟计算已经在工程技术、科学研究部门广泛应用。模拟计算机的基本出发点是根据自然界许多属性不同的现象具有相似的规律性。或者说用数学来描写这些自然现象时,它们具有相同的方程式。

电网络模拟法在水文地质研究中的应用

一、前言水文地质研究中有许多复杂的问题,单凭采用常规地质方法分析往往不易解决,其中很重要的原因是几乎所有的现象都很难直接观察,为此进行试验以显示某些结果演变过程的性质,将定性分析上升到定量评价是十分必要的的。已有的试验大体分为三类:第一类是电网络模拟,这是已经有各种规格的材料和设备,只须根据实际条件进行选择即可;第二类是渗流模型模拟,此类一般制造模型的任务繁重,

导热与导电模拟实验研究与分析

采用电模拟法研究导热现象,通过搭建实验台,用石墨导电漆制成导电板,用改装电压表和可控制变压器完成对导电板的电位测量,在导热导电边界条件相似的情况下,通过导电实验完成对导热现象的模拟。

数字闭环加速度计带宽测试方法的研究

为了消除传统电模拟法引入的激励信号对力矩器驱动模块造成的影响,提出了一种在数字闭环加速度计系统反馈回路数模转换器输入端叠加一个激励信号来测试系统带宽的方法。通过对该方法的电激励模型进行分析,表明在带宽测试时系统反馈回路D/A输入端叠加激励信号可以等效为外界输入的加速度。搭建测试平台测试系统带宽,实验表明,用该方法测得的数字闭环加速度计系统带宽与传统机械振动法的测试结果相接近。该方法未增加其它电路,降低了系统的复杂度,消除了电模拟法外加激励信号源对力矩器驱动模块的影响。此外,该方法操作快速简单、便于在线测试,可满足大多数数字闭环加速度计的带宽测试要求。

Forward modeling of marine DC resistivity method for a layered anisotropic earth

Since the ocean bottom is a sedimentary environment wherein stratification is well developed, the use of an anisotropic model is best for studying its geology. Beginning with Maxwell＇s equations for an anisotropic model, we introduce scalar potentials based on the divergence-free characteristic of the electric and magnetic （EM） fields. We then continue the EM fields down into the deep earth and upward into the seawater and couple them at the ocean bottom to the transmitting source. By studying both the DC apparent resistivity curves and their polar plots, we can resolve the anisotropy of the ocean bottom. Forward modeling of a high-resistivity thin layer in an anisotropic half-space demonstrates that the marine DC resistivity method in shallow water is very sensitive to the resistive reservoir but is not influenced by airwaves. As such, it is very suitable for oil and gas exploration in shallowwater areas but, to date, most modeling algorithms for studying marine DC resistivity are based on isotropic models. In this paper, we investigate one-dimensional anisotropic forward modeling for marine DC resistivity method, prove the algorithm to have high accuracy, and thus provide a theoretical basis for 2D and 3D forward modeling.

3D laterolog array sonde design and response simulation

A new three-dimensional laterolog array sonde（3D-LS） is presented. The 3DLS is based on existing high-resolution laterolog array and azimuthal resistivity imaging sondes with radial, longitudinal, and circumferential detection abilities. Six investigation modes are designed using the 3D finite-element method and different investigation depths are simulated based on the pseudo-geometrical factor of the six modes. The invasion profile is described using multi-array radial logs. From the analysis of the pseudo-geometrical factor, the investigation depth of the 3D-LS is about 1.5 m for conductive invasion, which is close to that of the dual laterolog tool but greater than that of the highly integrated azimuthal laterolog sonde. The vertical and azimuthal resolution is also analyzed with the same method. The 3DLS can detect low-resistivity anomalies of 0.5 m thickness and 15？ around the borehole for infinitely thick formations. This study lays the foundation for more work on 3D laterolog array sonde for evaluating low-resistivity anomalies.

Research and Design of Simulative System of Elevators Based on Java

The aim of the study is to simulate actual operation of an elevator. First, it designed elevator scheduling algorithm for control ing operation of the elevator;second, it simulated elevator operation by the use of object-oriented programming language, in which double buffering technology was used to solve the problem of elevator pictures flicker at refreshing; final y, test correctness and rationality of the system.

苏联传热学教材中辐射换热部分内容的变化

随着科学技术的进步,传热学有了迅速的发展。各国传热学教材的内容也相应得到了不同程度的更新。1978年以来,我国新编传热学教材内容的充实和更新是大家所共知的;我们对欧美传热学教材的近况和变化也是比较清楚的;对比起来,对于苏联的传热学教材,由于近几年介绍很少因而了解不多,下面试图在这一方面作些剖析。

Contrast between 2D inversion and 3D inversion based on 2D high-density resistivity data

The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy and effect can not meet the precise requirement of the inversion. Two typical models of the geological bodies were designed, and forward calculation was carried out using finite element method. The forward-modeled profiles were obtained. 1% Gaussian random error was added in the forward models and then 2D and 3D inversions using a high-density resistivity method were undertaken to realistically simulate field data and analyze the sensitivity of the 2D and 3D inversion algorithms to noise. Contrast between the 2D and 3D inversion results of least squares inversion shows that two inversion results of high-density resistivity method all can basically reflect the spatial position of an anomalous body. However, the 3D inversion can more effectively eliminate the influence of interference from Gaussian random error and better reflect the distribution of resistivity in the anomalous bodies. Overall, the 3D inversion was better than 2D inversion in terms of embodying anomalous body positions, morphology and resistivity properties.

1-D Controlled source electromagnetic forward modeling for marine gas hydrates studies

We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have established several 1-D resistivity models which have different gas hydrate concentrations. Meanwhile, we analyzed the electromagnetic response of marine gas hydrates in the frequency domain based on these models. We also studied the relationship between electrical field magnitude or phase and parameters such as receiver-transmitter distance and frequency. Our numerical modeling results provide us with a quantitative reference for exploration and resource evaluation of marine gas hydrates.

Three-dimensional numerical modeling of fullspace transient electromagnetic responses of water in goaf

The full-space transient electromagnetic response of water-filled goaves in coal mines were numerically modeled. Traditional numerical modeling methods cannot be used to simulate the underground full-space transient electromagnetic field. We used multiple transmitting loops instead of the traditional single transmitting loop to load the transmitting loop into Cartesian grids. We improved the method for calculating the z-component of the magnetic field based on the characteristics of full space. Then, we established the full- space 3D geoelectrical model using geological data for coalmines. In addition, the transient electromagnetic responses of water-filled goaves of variable shape at different locations were simulated by using the finite-difference time-domain （FDTD） method. Moreover, we evaluated the apparent resistivity results. The numerical modeling results suggested that the resistivity differences between the coal seam and its roof and floor greatly affect the distribution of apparent resistivity, resulting in nearly circular contours with the roadway head at the center. The actual distribution of apparent resistivity for different geoelectrical models of water in goaves was consistent with the models. However, when the goal water was located in one side, a false low-resistivity anomaly would appear on the other side owing to the full-space effect but the response was much weaker. Finally, the modeling results were subsequently confirmed by drilling, suggesting that the proposed method was effective.

Three-dimensional forward modeling for magnetotelluric sounding by finite element method

A finite element algorithm combined with divergence condition was presented for computing three-dimensional(3D) magnetotelluric forward modeling. The finite element equation of three-dimensional magnetotelluric forward modeling was derived from Maxwell's equations using general variation principle. The divergence condition was added forcedly to the electric field boundary value problem, which made the solution correct. The system of equation of the finite element algorithm was a large sparse, banded, symmetric, ill-conditioned, non-Hermitian complex matrix equation, which can be solved using the Bi-CGSTAB method. In order to prove correctness of the three-dimensional magnetotelluric forward algorithm, the computed results and analytic results of one-dimensional geo-electrical model were compared. In addition, the three-dimensional magnetotelluric forward algorithm is given a further evaluation by computing COMMEMI model. The forward modeling results show that the algorithm is very efficient, and it has a lot of advantages, such as the high precision, the canonical process of solving problem, meeting the internal boundary condition automatically and adapting to all kinds of distribution of multi-substances.

Comparison of structure and physical fields in 400 kA aluminum reduction cells

To investigate the differences and the development trends of the 400 kA aluminum reduction cell, four representative cells were deeply analyzed. By using numerical simulation methods in ANSYS software, the structure parameters were firstly compared, and then three-dimensional models of electric-magnetic-flow field were built and solved with finite element method(FEM). The comparison of the structures reveals that the cell bodies are similar while the current flow path and distribution ratio of bus bars are different. It appears that most of the current(70%-80%) in side A are used as the magnetic field compensation current and flow through two ends. The numerical simulation results indicate that the distributions of magnetic fields are different but all satisfy with the magnetohydrodynamics(MHD) stabilization, and the flow patterns are all two or multi vortexes with appropriate velocities. The comparison shows that all studied cells can satisfy with the physical field requirement, and the commercial applications also verify that the 400 kA cells have become the product of the mature and world's leading technology.

Calculation of all-time apparent resistivity of large loop transient electromagnetic method with very fast simulated annealing

In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position information of measuring point.Utilizing very fast simulated annealing(VFSA) to fit the theoretical electromagnetic force(EMF) and measured EMF could obtain the all-time apparent resistivity of the measuring points in rectangular transmitting loop.The selective cope of initial model of VFSA could be confirmed by taking the late time apparent resistivity of transient electromagnetic method as the prior information.For verifying the correctness,the all-time apparent resistivities of the geoelectric models were calculated by VFSA and dichotomy,respectively.The results indicate that the relative differences of apparent resistivities calculated by these two methods are within 3%.The change of measuring point position has little influence on the tracing pattern of all-time apparent resistivity.The first branch of the curve of all-time apparent resistivity is close to the resistivity of the first layer medium and the last branch is close to the resistivity of the last layer medium,which proves the correctness of the arithmetics proposed.

Methodology Approach Using Harmonic Synthesis as Simulation Method for Investigation of Power Network with Non-Linear Loads

The paper deals with analysis and synthesis of non-harmonic and non-linear sources and appliances, and their interaction with harmonic power supply network. Basic idea is based on knowledge of harmonic spectrum of the sources and/or appliances, respectively. Obviously, one need to know voltage harmonic components of voltage sources （renewable with inverters,...）, and current harmonic components generated by non-linear appliances （rectifiers,...）. Method of investigation lies on decomposition of real electric circuit into n-harmonic separated equivalent schemes for each harmonic component. Then transient analysis will be done for each scheme separately using ＂impedance harmonic matrices＂. The important fact is that each equivalent scheme is now linearized and therefore easily calculated. Finally, the effects of each investigated schemes arc summed into resulting quantities of real non-linear electric circuit.

Three-dimensional land FD-CSEM forward modeling using edge finite-element method

A modeling tool for simulating three-dimensional land frequency-domain controlled-source electromagnetic surveys,based on a finite-element discretization of the Helmholtz equation for the electric fields,has been developed.The main difference between our modeling method and those previous works is edge finite-element approach applied to solving the three-dimensional land frequency-domain electromagnetic responses generated by horizontal electric dipole source.Firstly,the edge finite-element equation is formulated through the Galerkin method based on Helmholtz equation of the electric fields.Secondly,in order to check the validity of the modeling code,the numerical results are compared with the analytical solutions for a homogeneous half-space model.Finally,other three models are simulated with three-dimensional electromagnetic responses.The results indicate that the method can be applied for solving three-dimensional electromagnetic responses.The algorithm has been demonstrated,which can be effective to modeling the complex geo-electrical structures.This efficient algorithm will help to study the distribution laws of3-D land frequency-domain controlled-source electromagnetic responses and to setup basis for research of three-dimensional inversion.

Totally Coded Algorithm for Switched-Current Network Analysis in Frequency Domain

Based on mirror-blocks, a totally coded algorithm （TCA） for switched-current （SI） network analysis in frequency domain is presented. The algorithm is simple, available, and suitable for any swltched-current networks. A basis of analysis and design for switched-current networks via this algorithm is provided.

Numerical modeling dynamic process of multi-feed microwave heating of industrial solution media

The exothermic efficiency of microwave heating an electrolyte/water solution is remarkably high due to the dielectric heating by orientation polarization of water and resistance heating by the Joule process occurred simultaneously compared with pure water.A three-dimensional finite element numerical model of multi-feed microwave heating industrial liquids continuously flowing in a meter-scale circular tube is presented.The temperature field inside the applicator tube in the cavity is solved by COMSOL Multiphysics and professional programming to describe the momentum,energy and Maxwell's equations.The evaluations of the electromagnetic field,the temperature distribution and the velocity field are simulated for the fluids dynamically heated by singleand multi-feed microwave system,respectively.Both the pilot experimental investigations and numerical results of microwave with single-feed heating for fluids with different effective permittivity and flow rates show that the presented numerical modeling makes it possible to analyze dynamic process of multi-feed microwave heating the industrial liquid.The study aids in enhancing the understanding and optimizing of dynamic process in the use of multi-feed microwave heating industrial continuous flow for a variety of material properties and technical parameters.