A differential equation for calculating squeeze-film air damping in slotted plates is developed by modifying the Reynolds equation. A term is added to account for the effect of airflow through the slots on the air dam...A differential equation for calculating squeeze-film air damping in slotted plates is developed by modifying the Reynolds equation. A term is added to account for the effect of airflow through the slots on the air damping of the plate. The end effect of the airflow in the slots is also treated by substituting an effective channel length for the geometric channel length （i. e. the thickness of the plate）..The damping pressure distribution, damping force, and damping force coefficient of the slotted plates can be found by solving the equation under appropriate boundary conditions. With restrictions on the thickness and the lateral dimensions of the slotted plate removed,the equation provides a useful tool for analysing the squeeze-film air damping effect of slotted plates with finite thickness and finite lateral dimensions. For a typical slotted plate structure, the damping force coefficient obtained by this equation agrees well with that generated by ANSYS.展开更多
In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Comp...In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.展开更多
The formation of runaway electron pre-ionized diffuse discharges at the pressures 0.05-0.7 MPa of in air, argon, nitrogen, and SF6 in an inhomogeneous electric field was investigated. Dynamics of intensity of the disc...The formation of runaway electron pre-ionized diffuse discharges at the pressures 0.05-0.7 MPa of in air, argon, nitrogen, and SF6 in an inhomogeneous electric field was investigated. Dynamics of intensity of the discharge plasma radiation from the different discharge gap regions in the gas pressure range （0.05-0.7 MPa） was established. It was shown that, the breakdown is occurred owing to the ionization wave, which starts from the electrode with small radius of curvature at both polarity of high voltage pulses. It is seen that formation of bright spots on the fiat electrode at the negative polarity of the electrode with small radius of curvature are observed during the changing of the discharge current polarity. It was shown that, at positive polarity of electrode with a small radius of curvature, the bright spots on the flat electrode arise due to the participation of the dynamic displacement current in the gap conductance.展开更多
Thermal decomposition of waste epoxy PCBs was performed in different atmospheres （nitrogen, argon, air and vacuum） at a heating rate of 10 ℃/rain by DSC-TGA, and the pyrolysis characteristic was analyzed. The gases...Thermal decomposition of waste epoxy PCBs was performed in different atmospheres （nitrogen, argon, air and vacuum） at a heating rate of 10 ℃/rain by DSC-TGA, and the pyrolysis characteristic was analyzed. The gases volatilized from the experiment were qualitatively analyzed by TG-FTIR. Kinetics study shows that pyrolysis reaction takes place between 300 and 400℃, and the activation energies are 256, 212 and 186.2 kJ/mol in nitrogen, argon and vacuum, respectively. There are two mass-loss processes in the decomposition under air atmosphere. In the first mass-loss process, the decomposition is the main reaction, and in the second process, the oxidation is the main reaction. The activation energy of the second mass-loss process is 99.6 kJ/mol by isothermal heat-treatments. TG-FTIR analysis shows carbon dioxide, carbon monoxide, hydrogen bromide, phenol and substituent phenol are given off during the pyrolysis of waste epoxy PCBs.展开更多
This paper presents some solutions of modem renewable energy system applied actually in dissipation energy source： wind turbine, solar panel battery charge, SSS （support set system）, and standby diesel generator co...This paper presents some solutions of modem renewable energy system applied actually in dissipation energy source： wind turbine, solar panel battery charge, SSS （support set system）, and standby diesel generator cooperated in series, parallel and hybrid system with main energy system. Its solution enable obtain independent individual energy source in different work exploitations. One of problems concerned with alternative energy source is changes of output voltages and output power dependence of climatic conditions. Possible solution is application of decoupled adjustable speed generation system in renewable energy generation. The decoupled generation system consists of： alternative energy source, internal combustion engine drives permanent magnet generator and DC/AC, or AC/AC converter. Performance of single decoupled generation set is discussed supported by results of laboratory tests. To provide high quality voltage is applied an additional energy storage, made from super capacitor and bidirectional DC/DC convert. Such system performs very stiff voltage in any load condition. Integration of solar battery panels or renewable wind energy system is provided via DC link of the variable speed decoupled autonomous generation system. Results of computer simulation and laboratory experiments are presented in the paper.展开更多
One of the key features of Laplace＇s Equation is the property that allows the equation governing the flow field to be converted from a 3D problem throughout the field to a 2D problem for finding the potential on the ...One of the key features of Laplace＇s Equation is the property that allows the equation governing the flow field to be converted from a 3D problem throughout the field to a 2D problem for finding the potential on the surface. The solution is then found using this property by distributing ＂singularities＂ of unknown strength over discretized portions of the surface： panels. Hence the flow field solution is found by representing the surface by a number of panels, and solving a linear set of algebraic equations to determine the unknown strengths of the singularities. In this paper a Hess-Smith Panel Method is then used to examine the aerodynamics of NACA 4412 and NACA 23015 wind turbine airfoils. The lift coefficient and the pressure distribution are predicted and compared with experimental result for low Reynolds number. Results show a good agreement with experimental data.展开更多
One of the most important and effective hardware elements for improvement of efficiency and power density of proton exchange membrane fuel cells is the flow field plate. The design and the pattern of the flow field pl...One of the most important and effective hardware elements for improvement of efficiency and power density of proton exchange membrane fuel cells is the flow field plate. The design and the pattern of the flow field plate have a considerable effect on the effectiveness of mass transport as well as on the electrochemical reactions inside the cell. The configuration of the flow field plate aims at ensuring a low pressure-drop over all channels in the stack. In this work, a FPFFP （fractal parallel flow field plate）, with bio-inspired configuration by insertion of fractals in a classic PFFP （parallel flow field plate）, is proposed, increasing the flow area of the hydrogen at anode side without increasing the section＇s area of the flow field plate. By simulating was observed that, the use of channels in fractal shape can increase the hydrogen flow area without occuring pressure loss in the cell. The fluid dynamic behavior in the FPFFP at smaller scales was replicated in the same plate, with better advantage of the active area of the electrode. Increasing the hydrogen flow area without causing pressure loss could be a good tactic to increase the power density of fuel cells, and consequently improving the cell performance.展开更多
This paper presents an experimental investigation of the influence of a transversal flow deflector on the cooling of a heated block mounted on a flat plate.The deflector is inclined and therefore it guides the air flo...This paper presents an experimental investigation of the influence of a transversal flow deflector on the cooling of a heated block mounted on a flat plate.The deflector is inclined and therefore it guides the air flow to the upper surface of the block.This configuration is simulating the air-cooling of a rectangular integrated circuit or a current converter mounted on an electronic card.The electronic component is assumed dissipating low heat power,as such,air forced convection is still a sufficient cooling way even without fan or heat sink on the component.The measurements are given by hot and cold wires anemometers and by an InfraRed camera.The results give details of the effects of the deflection on the hydrodynamic and the thermal fields on and over the block for different inclination angles.They show that the deviation caused by the deflector may significantly enhance the heat transfer from the component.Deflection is also able to avoid local overheating of the electronic component.Optimum heat transfer rate and homogenised temperature are shown to be obtained with an inclination angle =30°.展开更多
文摘A differential equation for calculating squeeze-film air damping in slotted plates is developed by modifying the Reynolds equation. A term is added to account for the effect of airflow through the slots on the air damping of the plate. The end effect of the airflow in the slots is also treated by substituting an effective channel length for the geometric channel length （i. e. the thickness of the plate）..The damping pressure distribution, damping force, and damping force coefficient of the slotted plates can be found by solving the equation under appropriate boundary conditions. With restrictions on the thickness and the lateral dimensions of the slotted plate removed,the equation provides a useful tool for analysing the squeeze-film air damping effect of slotted plates with finite thickness and finite lateral dimensions. For a typical slotted plate structure, the damping force coefficient obtained by this equation agrees well with that generated by ANSYS.
基金Supported by the funding from "135" Projects Fund of CAS-QIBEBT Director Innovation FoundationThink-Tank Mutual Fund of Qingdao Energy Storage Industry Scientific Research+3 种基金Qingdao Key Lab of Solar Energy Utilization and Energy Storage Technologythe Strategic Priority Research Program of the Chinese Academy of Sciences(XDA09010105)National Natural Science Foundation of China(51502319)Shandong Provincial Natural Science Foundation(ZR2016BQ18)
文摘In this work,a sponge-like polysulfonamide(PSA)/SiO_2 composite membrane is unprecedentedly prepared by the phase inversion method,and successfully demonstrated as a novel separator of lithium-ion batteries(LIBs).Compared to the commercial polypropylene(PP) separator,the sponge-like PSA/SiO_2 composite possesses better physical and electrochemical properties,such as higher porosity,ionic conductivity,thermal stability and flame retarding ability.The LiCoO_2/Li half-cells using the sponge-like composite separator demonstrate superior rate capability and cyclability over those using the commercial PP separator.Moreover,the sponge-like composite separator can ensure the normal operation of LiCoO_2/Li half-cell at an extremely high temperature of 90 °C,while the commercial PP separator cannot.All these encouraging results suggest that this phase inversion based sponge-like PSA/SiO_2 composite separator is really a promising separator for high performance LIBs.
基金Acknowledgments The work was supported by the grant from the Russian Science Foundation, project No. 14-29-00052.
文摘The formation of runaway electron pre-ionized diffuse discharges at the pressures 0.05-0.7 MPa of in air, argon, nitrogen, and SF6 in an inhomogeneous electric field was investigated. Dynamics of intensity of the discharge plasma radiation from the different discharge gap regions in the gas pressure range （0.05-0.7 MPa） was established. It was shown that, the breakdown is occurred owing to the ionization wave, which starts from the electrode with small radius of curvature at both polarity of high voltage pulses. It is seen that formation of bright spots on the fiat electrode at the negative polarity of the electrode with small radius of curvature are observed during the changing of the discharge current polarity. It was shown that, at positive polarity of electrode with a small radius of curvature, the bright spots on the flat electrode arise due to the participation of the dynamic displacement current in the gap conductance.
基金Project(2006AA06Z375) supported by the National High-tech Research and Development Program of China
文摘Thermal decomposition of waste epoxy PCBs was performed in different atmospheres （nitrogen, argon, air and vacuum） at a heating rate of 10 ℃/rain by DSC-TGA, and the pyrolysis characteristic was analyzed. The gases volatilized from the experiment were qualitatively analyzed by TG-FTIR. Kinetics study shows that pyrolysis reaction takes place between 300 and 400℃, and the activation energies are 256, 212 and 186.2 kJ/mol in nitrogen, argon and vacuum, respectively. There are two mass-loss processes in the decomposition under air atmosphere. In the first mass-loss process, the decomposition is the main reaction, and in the second process, the oxidation is the main reaction. The activation energy of the second mass-loss process is 99.6 kJ/mol by isothermal heat-treatments. TG-FTIR analysis shows carbon dioxide, carbon monoxide, hydrogen bromide, phenol and substituent phenol are given off during the pyrolysis of waste epoxy PCBs.
文摘This paper presents some solutions of modem renewable energy system applied actually in dissipation energy source： wind turbine, solar panel battery charge, SSS （support set system）, and standby diesel generator cooperated in series, parallel and hybrid system with main energy system. Its solution enable obtain independent individual energy source in different work exploitations. One of problems concerned with alternative energy source is changes of output voltages and output power dependence of climatic conditions. Possible solution is application of decoupled adjustable speed generation system in renewable energy generation. The decoupled generation system consists of： alternative energy source, internal combustion engine drives permanent magnet generator and DC/AC, or AC/AC converter. Performance of single decoupled generation set is discussed supported by results of laboratory tests. To provide high quality voltage is applied an additional energy storage, made from super capacitor and bidirectional DC/DC convert. Such system performs very stiff voltage in any load condition. Integration of solar battery panels or renewable wind energy system is provided via DC link of the variable speed decoupled autonomous generation system. Results of computer simulation and laboratory experiments are presented in the paper.
文摘One of the key features of Laplace＇s Equation is the property that allows the equation governing the flow field to be converted from a 3D problem throughout the field to a 2D problem for finding the potential on the surface. The solution is then found using this property by distributing ＂singularities＂ of unknown strength over discretized portions of the surface： panels. Hence the flow field solution is found by representing the surface by a number of panels, and solving a linear set of algebraic equations to determine the unknown strengths of the singularities. In this paper a Hess-Smith Panel Method is then used to examine the aerodynamics of NACA 4412 and NACA 23015 wind turbine airfoils. The lift coefficient and the pressure distribution are predicted and compared with experimental result for low Reynolds number. Results show a good agreement with experimental data.
文摘One of the most important and effective hardware elements for improvement of efficiency and power density of proton exchange membrane fuel cells is the flow field plate. The design and the pattern of the flow field plate have a considerable effect on the effectiveness of mass transport as well as on the electrochemical reactions inside the cell. The configuration of the flow field plate aims at ensuring a low pressure-drop over all channels in the stack. In this work, a FPFFP （fractal parallel flow field plate）, with bio-inspired configuration by insertion of fractals in a classic PFFP （parallel flow field plate）, is proposed, increasing the flow area of the hydrogen at anode side without increasing the section＇s area of the flow field plate. By simulating was observed that, the use of channels in fractal shape can increase the hydrogen flow area without occuring pressure loss in the cell. The fluid dynamic behavior in the FPFFP at smaller scales was replicated in the same plate, with better advantage of the active area of the electrode. Increasing the hydrogen flow area without causing pressure loss could be a good tactic to increase the power density of fuel cells, and consequently improving the cell performance.
基金support of the Comité Mixte Franco-Tunisien pour la Coopération Universitaire(ProjectCMCU 08G1131)
文摘This paper presents an experimental investigation of the influence of a transversal flow deflector on the cooling of a heated block mounted on a flat plate.The deflector is inclined and therefore it guides the air flow to the upper surface of the block.This configuration is simulating the air-cooling of a rectangular integrated circuit or a current converter mounted on an electronic card.The electronic component is assumed dissipating low heat power,as such,air forced convection is still a sufficient cooling way even without fan or heat sink on the component.The measurements are given by hot and cold wires anemometers and by an InfraRed camera.The results give details of the effects of the deflection on the hydrodynamic and the thermal fields on and over the block for different inclination angles.They show that the deviation caused by the deflector may significantly enhance the heat transfer from the component.Deflection is also able to avoid local overheating of the electronic component.Optimum heat transfer rate and homogenised temperature are shown to be obtained with an inclination angle =30°.
