期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
刻蚀设备在太阳能晶硅电池刻蚀工艺中的应用 被引量:1
1
作者 杨金 郭进 +2 位作者 魏唯 万喜新 李佳 《电子工业专用设备》 2013年第8期26-29,共4页
介绍了激光划线设备在太阳能电池中的应用。与传统等离子体刻蚀设备对比,从设备结构,工艺原理,试验测试等方面做了深入的分析,并从理论角度分析得出激光刻蚀具备效率损失小,能够提高电池片的转换效率的优点,同时用实验验证了激光划片设... 介绍了激光划线设备在太阳能电池中的应用。与传统等离子体刻蚀设备对比,从设备结构,工艺原理,试验测试等方面做了深入的分析,并从理论角度分析得出激光刻蚀具备效率损失小,能够提高电池片的转换效率的优点,同时用实验验证了激光划片设备具有优异的刻蚀效果,对提升电池片效率的贡献。 展开更多
关键词 激光刻蚀 等离子体刻蚀 太阳能 硅片电池
下载PDF
石墨舟自动装卸定位方法的研究与实现 被引量:1
2
作者 郭忠君 吕文利 魏唯 《自动化与仪器仪表》 2013年第1期130-132,共3页
太阳能电池硅片定位技术直接影响石墨舟自动装卸系统的生产效率和碎片率。文章介绍了太阳能电池硅片自动装卸的定位方法,该方法应用在新研制的石墨舟自动装卸系统中,取得了生产效率大于1500片/小时、碎片率小于0.1%的理想效果。
关键词 太阳能电池硅片 石墨舟 自动装卸 定位
下载PDF
Development of a miniature silicon wafer fuel cell using L-ascorbic acid as fuel 被引量:1
3
作者 Jian WU Zhi-yong XIAO +1 位作者 Yi-bin YING Philip C.H. CHAN 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2008年第7期955-960,共6页
In the current studies a miniature silicon wafer fuel cell(FC) using L-ascorbic acid as fuel was developed. The cell employs L-ascorbic acid and air as reactants and a thin polymer electrolyte as a separator. Inductiv... In the current studies a miniature silicon wafer fuel cell(FC) using L-ascorbic acid as fuel was developed. The cell employs L-ascorbic acid and air as reactants and a thin polymer electrolyte as a separator. Inductively coupled plasma(ICP) silicon etching was employed to fabricate high aspect-ratio columns on the silicon substrate to increase the surface area. A thin platinum layer deposited directly on the silicon surface by the sputtering was used as the catalyst layer for L-ascorbic acid electro-oxidation. Cyclic voltammetry shows that the oxidation of L-ascorbic acid on the sputtered platinum layer is irreversible and that the onset potentials for the oxidation of L-ascorbic acid are from 0.27 V to 0.35 V versus an Ag/AgCl reference electrode. It is found that at the room temperature,with 1 mol/L L-ascorbic acid/PBS(phosphate buffered solution) solution pumped to the anode at 1 ml/min flow rate and air spontaneously diffusing to the cathode as the oxidant,the maximum output power density of the cell was 1.95 mW/cm2 at a current density of 10 mA/cm2. 展开更多
关键词 硅片燃料电池 L-抗坏血酸 发展 电解液
下载PDF
废旧晶体硅光伏组件回收技术研究进展 被引量:3
4
作者 吴智朋 高德东 +3 位作者 王珊 魏晓旭 邵明玺 辛元庆 《机械工程学报》 EI CAS CSCD 北大核心 2023年第7期307-329,共23页
随着全球光伏产业的蓬勃发展,光伏组件作为光伏电站中最关键的部件,面临着大规模的资源流失及重金属在环境中的扩散问题,回收报废光伏组件中所含的二次资源将成为解决环境污染问题、推动光伏行业可持续发展的重要途径。为实现光伏组件... 随着全球光伏产业的蓬勃发展,光伏组件作为光伏电站中最关键的部件,面临着大规模的资源流失及重金属在环境中的扩散问题,回收报废光伏组件中所含的二次资源将成为解决环境污染问题、推动光伏行业可持续发展的重要途径。为实现光伏组件的高效拆解和解离,采用热、机械和化学等处理工艺备受研究者们关注。在综合分析太阳能电池回收完整性的基础上,提出了晶体硅光伏组件的两种回收技术路线——废旧组件的电池无损回收路线和成分综合回收路线。对电池无损回收路线中不同的分层工艺进行了深入分析,总结归纳了电池硅片破损的原因,着重讨论了光伏组件低温破碎及高压脉冲破碎最新的研究成果、反应机理等。同时,对废旧光伏组件材料的回收再利用、经济性及环境性分析进行了系统的综述。最后,对废旧光伏组件资源化回收的发展趋势及前景进行了展望,为未来研发更加绿色高效的回收工艺提供参考。 展开更多
关键词 晶体硅光伏组件 废旧光伏组件 资源回收 电池硅片 电池无损回收 成分综合回收
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部