Nanocrystalline Ni-Fe FCC alloy coatings with Fe content of 1.3%-39%（mass fraction） were fabricated on the nickel substrates using a DC electrodeposition technique. The crystal structure, lattice strain, grain size ...Nanocrystalline Ni-Fe FCC alloy coatings with Fe content of 1.3%-39%（mass fraction） were fabricated on the nickel substrates using a DC electrodeposition technique. The crystal structure, lattice strain, grain size and lattice constant of the Ni-Fe alloy coatings were studied by X-ray diffraction technique. The chemical composition and surface morphology of the FCC Ni-Fe alloy coatings were investigated with the energy dispersive X-ray spectroscopy（EDS） and atomic force microscopy（AFM）. The results show that the Fe content of the Ni-Fe alloy coatings has a great influence on the preferred orientation, grain size, lattice constant and lattice strain. FCC Ni-Fe alloy coatings exhibit preferred orientations of（200） or（200）（111）. With an increase of Fe content, the preferred growth orientation of（200） plane is weakened gradually, while the preferred growth orientation of（111） increases. An increase of the Fe content in the range of 1.3%-25%（mass fraction） results in a significant grain refinement of the coatings. Increasing the Fe content beyond 25% does not decrease the grain size of FCC Ni-Fe alloys further. The lattice strain increases with increasing the Fe content in the FCC Ni-Fe alloys. Since the alloys with Fe content not less than 25% has similar grain size（~11 nm）, the increase in the lattice strain with the increase of Fe content cannot be attributed to the change in the grain size.展开更多
The nanocrystalline Fe-Ni-Cr coatings were electrodeposited by using the pulse current technique.The SEM results showed that the coatings had a mixed morphology of small nodules and fine cauliflower structures at low ...The nanocrystalline Fe-Ni-Cr coatings were electrodeposited by using the pulse current technique.The SEM results showed that the coatings had a mixed morphology of small nodules and fine cauliflower structures at low current densities.Also,the Cr content was increased at expense of Fe and Ni contents at high current densities.XRD patterns confirmed that the pulse current density had a positive effect on the grain refinement.The results of vibrating sample magnetometer(VSM)measurements demonstrated that by increasing the current density,the saturation magnetization was decreased and the coercivity was increased due to the enhancement of Cr content and the reduction of the grain size.The friction coefficient and wear rate values were decreased by increasing the pulse current density.Also,both the adhesive and abrasive wear mechanisms were observed on the worn surfaces.The abrasive grooves and the amount of wear debris were decreased by increasing the pulse current density.展开更多
The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the ele...The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the electrodeposited Ni−W alloy.The nucleation type and kinetic parameters of the electrodeposited Ni−W alloy were obtained from the CA analysis results.SEM,AFM,and TEM were also used to investigate the nucleation and growth process of the electrodeposition of Ni−W alloy.The results demonstrate that the nucleation and initial stages of the growth phase of the Ni−W alloy undergo the formation,movement,and aggregation of atoms,single crystals,and nanoclusters.When the size of single crystal increases up to approximately 10 nm and the average size of the crystal granules is approximately 68 nm,they no longer grow.Increasing the applied potential increases the number of nuclei but does not affect the size of the final crystal granules.Therefore,the electrodeposited Ni−W alloy shows a nanocrystalline structure.展开更多
In this work,highly monodispersed Pt-Ni alloy nanoparticles were directly deposited on carbon substrate through a facile electrodeposition strategy in the solvent system of N,N-dimethylformamide(DMF).A series of carbo...In this work,highly monodispersed Pt-Ni alloy nanoparticles were directly deposited on carbon substrate through a facile electrodeposition strategy in the solvent system of N,N-dimethylformamide(DMF).A series of carbon supported Pt-Ni alloy electrocatalysts were synthesized under different applied electrode potentials.Among all as-obtained samples,the Pt-Ni/C electrocatalyst deposited at-1.73 V exhibits the optimal specific activity up to 1.850 mA cm^(-2)at 0.9 V vs.RHE,which is 6.85 times higher than that of the commercial Pt/C.Comprehensive physiochemical characterizations and computational evaluations via density functional theory were conducted to unveil the nucleation and growth mechanism of PtNi alloy formation.Compared to the aqueous solution,DMF solvent molecule must not be neglected in avoiding particle agglomeration and synthesis of monodispersed nanoparticles.During the alloy co-deposition process,Ni sites produced through the reduction of Ni(Ⅱ)precursor not only facilitates Pt-Ni alloy crystal nucleation but also in favor of further Pt reduction on the Ni-inserted Pt surface.As for the deposition potential,it adjusts the final particle size.This work provides a hopeful extended Pt-based catalyst layer production strategy for proton exchange membrane fuel cells and a new idea for the nucleation and growth mechanism exploration for electrodeposited Pt alloy.展开更多
基金Project(51021063)supported by the National Natural Science Fund for Innovation Group of ChinaProject(2012M521540)supported by China Post Doctoral Science Foundation+1 种基金Project(2013RS4027)supported by the Post Doctoral Scientific Foundation of Hunan Province,ChinaProject(CSUZC2013023)supported by the Precious Apparatus Open Share Foundation of Central South University,China
文摘Nanocrystalline Ni-Fe FCC alloy coatings with Fe content of 1.3%-39%（mass fraction） were fabricated on the nickel substrates using a DC electrodeposition technique. The crystal structure, lattice strain, grain size and lattice constant of the Ni-Fe alloy coatings were studied by X-ray diffraction technique. The chemical composition and surface morphology of the FCC Ni-Fe alloy coatings were investigated with the energy dispersive X-ray spectroscopy（EDS） and atomic force microscopy（AFM）. The results show that the Fe content of the Ni-Fe alloy coatings has a great influence on the preferred orientation, grain size, lattice constant and lattice strain. FCC Ni-Fe alloy coatings exhibit preferred orientations of（200） or（200）（111）. With an increase of Fe content, the preferred growth orientation of（200） plane is weakened gradually, while the preferred growth orientation of（111） increases. An increase of the Fe content in the range of 1.3%-25%（mass fraction） results in a significant grain refinement of the coatings. Increasing the Fe content beyond 25% does not decrease the grain size of FCC Ni-Fe alloys further. The lattice strain increases with increasing the Fe content in the FCC Ni-Fe alloys. Since the alloys with Fe content not less than 25% has similar grain size（~11 nm）, the increase in the lattice strain with the increase of Fe content cannot be attributed to the change in the grain size.
文摘The nanocrystalline Fe-Ni-Cr coatings were electrodeposited by using the pulse current technique.The SEM results showed that the coatings had a mixed morphology of small nodules and fine cauliflower structures at low current densities.Also,the Cr content was increased at expense of Fe and Ni contents at high current densities.XRD patterns confirmed that the pulse current density had a positive effect on the grain refinement.The results of vibrating sample magnetometer(VSM)measurements demonstrated that by increasing the current density,the saturation magnetization was decreased and the coercivity was increased due to the enhancement of Cr content and the reduction of the grain size.The friction coefficient and wear rate values were decreased by increasing the pulse current density.Also,both the adhesive and abrasive wear mechanisms were observed on the worn surfaces.The abrasive grooves and the amount of wear debris were decreased by increasing the pulse current density.
基金financial support from the Science and Technology Project of Hunan Province,China(No.2018TP1012)。
文摘The nucleation and growth mechanism of electrodeposited Ni−W alloy were investigated.Cyclic voltammetry(CV)and chronoamperometry(CA)were used to examine the electrochemical behavior and nucleation mechanism of the electrodeposited Ni−W alloy.The nucleation type and kinetic parameters of the electrodeposited Ni−W alloy were obtained from the CA analysis results.SEM,AFM,and TEM were also used to investigate the nucleation and growth process of the electrodeposition of Ni−W alloy.The results demonstrate that the nucleation and initial stages of the growth phase of the Ni−W alloy undergo the formation,movement,and aggregation of atoms,single crystals,and nanoclusters.When the size of single crystal increases up to approximately 10 nm and the average size of the crystal granules is approximately 68 nm,they no longer grow.Increasing the applied potential increases the number of nuclei but does not affect the size of the final crystal granules.Therefore,the electrodeposited Ni−W alloy shows a nanocrystalline structure.
文摘In this work,highly monodispersed Pt-Ni alloy nanoparticles were directly deposited on carbon substrate through a facile electrodeposition strategy in the solvent system of N,N-dimethylformamide(DMF).A series of carbon supported Pt-Ni alloy electrocatalysts were synthesized under different applied electrode potentials.Among all as-obtained samples,the Pt-Ni/C electrocatalyst deposited at-1.73 V exhibits the optimal specific activity up to 1.850 mA cm^(-2)at 0.9 V vs.RHE,which is 6.85 times higher than that of the commercial Pt/C.Comprehensive physiochemical characterizations and computational evaluations via density functional theory were conducted to unveil the nucleation and growth mechanism of PtNi alloy formation.Compared to the aqueous solution,DMF solvent molecule must not be neglected in avoiding particle agglomeration and synthesis of monodispersed nanoparticles.During the alloy co-deposition process,Ni sites produced through the reduction of Ni(Ⅱ)precursor not only facilitates Pt-Ni alloy crystal nucleation but also in favor of further Pt reduction on the Ni-inserted Pt surface.As for the deposition potential,it adjusts the final particle size.This work provides a hopeful extended Pt-based catalyst layer production strategy for proton exchange membrane fuel cells and a new idea for the nucleation and growth mechanism exploration for electrodeposited Pt alloy.
