期刊文献+
共找到16篇文章
< 1 >
每页显示 20 50 100
一种检测运行钢丝绳的可靠方法——电磁检测法
1
作者 H.R.Weischedel R.P.Ramsey 吴希林 《有色矿山》 1990年第5期23-27,共5页
近年来,钢丝绳检测技术发展迅速,现在采用的电磁检测仪使用极为方便,已经成为检测钢丝绳的重要工具(有时是必不可少的).用这种仪器检测获得的数据能对诸如金属截面积损失(LMA)等与钢丝绳安全性相关的参数进行定量评估;同时也能为我们分... 近年来,钢丝绳检测技术发展迅速,现在采用的电磁检测仪使用极为方便,已经成为检测钢丝绳的重要工具(有时是必不可少的).用这种仪器检测获得的数据能对诸如金属截面积损失(LMA)等与钢丝绳安全性相关的参数进行定量评估;同时也能为我们分析钢丝绳的工作状况,确定其使用寿命提供依据.本文论述了现代无损检测法在评估运行钢丝绳安全性问题中的应用。 展开更多
关键词 钢丝绳 运行 检测 电磁检测法
下载PDF
电磁信号检测法在电火花加工放电点测量中的应用 被引量:1
2
作者 韩强 赵万生 狄士春 《电测与仪表》 北大核心 1999年第1期23-25,共3页
提出了用电磁信号检则法测量电火花加工中放电位置的检测方法和基本原理。用两个霍尔元件测量加工工件两侧流过电流时产生的磁感应强度,通过对两霍尔元件输出霍尔电势之差值进行处理从而确定加工点的位置。在电火花实际应用中实测的数... 提出了用电磁信号检则法测量电火花加工中放电位置的检测方法和基本原理。用两个霍尔元件测量加工工件两侧流过电流时产生的磁感应强度,通过对两霍尔元件输出霍尔电势之差值进行处理从而确定加工点的位置。在电火花实际应用中实测的数据结果验证了电磁信号检测法的可行性。 展开更多
关键词 电火花加工 电磁信号检测法 放电点测量
下载PDF
矿用钢丝绳损伤检测信号处理方法研究 被引量:6
3
作者 王红尧 吴佳奇 +2 位作者 李长恒 唐文锦 张艳林 《工矿自动化》 北大核心 2021年第2期58-62,共5页
采用电磁检测法检测矿用钢丝绳受损情况时,检测信号中含有大量噪声,且存在尖峰和突变干扰,增大了损伤识别难度,需要对原始检测信号进行降噪处理。常用的傅里叶变换无法处理运行中的钢丝绳检测信号,而小波变换因存在平移不变性较差、频... 采用电磁检测法检测矿用钢丝绳受损情况时,检测信号中含有大量噪声,且存在尖峰和突变干扰,增大了损伤识别难度,需要对原始检测信号进行降噪处理。常用的傅里叶变换无法处理运行中的钢丝绳检测信号,而小波变换因存在平移不变性较差、频带混叠等问题而影响检测准确度。提出了基于双树复小波变换的矿用钢丝绳损伤检测信号处理方法。首先采用Q平移法构造双树复小波高低通滤波器,对原始信号进行3层双树复小波分解,得到高低频信号分量;然后采用最小极大方差软阈值方法对分解信号进行降噪处理;最后对降噪信号进行重构。在实验室环境下搭建了钢丝绳损伤检测试验平台,对基于双树复小波变换的钢丝绳损伤检测信号处理方法的降噪性能进行验证,结果表明:该方法可有效减少检测信号中的尖峰和突变数量,使信号平稳,降噪效果优于经典小波变换,且增大了奇异点处信号峰值,有利于后续特征提取。 展开更多
关键词 矿用钢丝绳 钢丝绳损伤检测 电磁检测法 信号降噪 小波变换 双树复小波变换
下载PDF
霍尔效应检测钢丝绳断丝 被引量:5
4
作者 张晓春 赵志洲 《工科物理》 1998年第1期34-36,共3页
本文介绍了霍尔效应在钢丝绳断丝检测中的应用.
关键词 霍尔效应 钢丝绳 检测 断丝 电磁检测法
下载PDF
电火花加工放电点位置检测仪的研制 被引量:1
5
作者 韩强 赵万生 狄士春 《制造技术与机床》 CSCD 北大核心 1999年第12期25-27,共3页
提出了电磁信号检测法在电火花加工放电点位置检测中的应用,讨论了检测方法的基本原理。在此基础上设计了电火花放电点位置检测仪。
关键词 电火花加工 放电点位置 电磁信号检测法 检测
下载PDF
电火花加工放电位置检测厚壁模型的仿真 被引量:2
6
作者 韩强 何勇 赵万生 《电加工与模具》 2001年第2期16-18,共3页
为了给电磁信号检测法放电位置检测仪中传感器系统的研制奠定基础 ,本文采用麦克斯韦方程对电火花加工过程中工件本身建立厚壁模型 ,并采用电磁场有限元法对其进行仿真 ,得出了与放电位置有关的磁场强度和放电位置的关系。
关键词 电火花加工 放电位置检测 厚壁模型 电磁信号检测法 仿真
下载PDF
磁场在钢丝绳无损检测中的应用
7
作者 曹平军 徐晶晶 《科技创新与生产力》 2014年第5期76-78,共3页
作为特种设备之一的钢丝绳已经成为国民经济建设的重要基础设备,面对钢丝绳断裂造成的严重事故,需采取一些必要的技术手段来预防。从技术方面分析钢丝绳无损检测的国内外发展现状,对基于电磁原理的各种电磁检测方法做了详细的说明,为开... 作为特种设备之一的钢丝绳已经成为国民经济建设的重要基础设备,面对钢丝绳断裂造成的严重事故,需采取一些必要的技术手段来预防。从技术方面分析钢丝绳无损检测的国内外发展现状,对基于电磁原理的各种电磁检测方法做了详细的说明,为开展钢丝绳安全检测的理论、技术与方法,开发检测仪器提供一定的参考。 展开更多
关键词 钢丝绳 无损检测 励磁方式 电磁检测法
下载PDF
XLPE电力电缆局放的电磁耦合检测法的研究 被引量:9
8
作者 马翠姣 邱毓昌 +1 位作者 罗俊华 夏明通 《华东电力》 北大核心 2001年第6期1-3,共3页
综合分析了各个参数对电流耦合器幅频特性的影响 ,设计并研制了具有最优幅频特性的罗戈夫斯基线圈型电流耦合器。与 IEC-2 70推荐的电容耦合法进行比较 ,电磁耦合法具有较高的灵敏度。通过对存在缺陷的XLPE电力电缆线段的检测表明 ,电... 综合分析了各个参数对电流耦合器幅频特性的影响 ,设计并研制了具有最优幅频特性的罗戈夫斯基线圈型电流耦合器。与 IEC-2 70推荐的电容耦合法进行比较 ,电磁耦合法具有较高的灵敏度。通过对存在缺陷的XLPE电力电缆线段的检测表明 ,电磁耦合法能较好的反映其局部放电特性。 展开更多
关键词 XLPE电力电缆 局部放电 电磁耦合检测法 电流耦合器
原文传递
Experiment in metal disturbance during advanced detection using a transient electromagnetic method in coal mines 被引量:13
9
作者 JIANG Zhihai YUE Jianhua YU Jingcun 《Mining Science and Technology》 EI CAS 2010年第6期861-863,共3页
Tunneling machines, or excavators, are large and good conductors and affect the reliability of data gathering and interpretation in advanced detection using transient electromagnetic methods. In our experiment, we use... Tunneling machines, or excavators, are large and good conductors and affect the reliability of data gathering and interpretation in advanced detection using transient electromagnetic methods. In our experiment, we used a coincident-loop and central loop type of configuration, where the coil plane l) vertical to and 2) parallel to the working face. A SIROTEM instrument at different locations was used to observe the transient electromagnetic responses of the excavator and to analyze the response amplitudes. The result shows that the tunneling machine affects the advanced detection data and is related to the way the coil is coupled. When the excavator is 6 m from the observatory, the interference of tunneling machine can be ignored. 展开更多
关键词 transient electromagnetic method advanced detection metal disturbance driving face
下载PDF
Detection technology and application of electromagnetic method for hidden danger of water gushing at coal face 被引量:2
10
作者 SHI Xian-xin YAN Shu +1 位作者 CHEN Ming-sheng FU Jun-mei 《Journal of Coal Science & Engineering(China)》 2009年第2期197-205,共9页
The principles, methods, technologies and application effects of several electromagnetic methods for the detection of the hidden danger of water gushing at the coal face were introduced. Also, emphasis was laid on exp... The principles, methods, technologies and application effects of several electromagnetic methods for the detection of the hidden danger of water gushing at the coal face were introduced. Also, emphasis was laid on expounding the methods, principles and effects of down-hole detections by electric transmission tomography and transient electromagnetic method. The potential of point power supplied in the underground homogeneous semi-space, as well as the response to a low-resistivity abnormal body in the homogeneous semi-space, was simulated by adopting 3-D finite element method to interpret the basic theory of the electric transmission tomography. The results of actual measurement show that the mine electromagnetic method is sensitive to water-bearing low-resistivity bodies and can play a unique role in detecting the hidden danger of water gushing at the coal face. 展开更多
关键词 hidden trouble of water gushing electric transmission tomography mine transient electromagnetic method coal face high-density resistivity method 3-D finite element simulation
下载PDF
Prediction study of hydrocarbon reservoir based on time-frequency domain electromagnetic technique taking Ili Basin as an example 被引量:1
11
作者 Tian Yu-Kun Zhou Hui +1 位作者 Ma Yan-Yan Li Juan 《Applied Geophysics》 SCIE CSCD 2020年第5期687-699,900,901,共15页
The time-frequency domain electromagnetic(TFEM)sounding technique can directly detect oil and gas characteristics through anomalies in resistivity and polarizability.In recent years,it has made some breakthroughs in h... The time-frequency domain electromagnetic(TFEM)sounding technique can directly detect oil and gas characteristics through anomalies in resistivity and polarizability.In recent years,it has made some breakthroughs in hydrocarbon detection.TFEM was applied to predict the petroliferous property of the Ili Basin.In accordance with the geological structure characteristics of the study area,a two-dimensional layered medium model was constructed and forward modeling was performed.We used the forward-modeling results to guide fi eld construction and ensure the quality of the fi eld data collection.We used the model inversion results to identify and distinguish the resolution of the geoelectric information and provide a reliable basis for data processing.On the basis of our results,key technologies such as 2D resistivity tomography imaging inversion and polarimetric constrained inversion were developed,and we obtained abundant geological and geophysical information.The characteristics of the TFEM anomalies of the hydrocarbon reservoirs in the Ili Basin were summarized through an analysis of the electrical logging data in the study area.Moreover,the oil-gas properties of the Permian and Triassic layers were predicted,and the next favorable exploration targets were optimized. 展开更多
关键词 Time–Frequency Domain Electromagnetic Hydrocarbon Detection Polarizability Anomaly Favorable Area Prediction
下载PDF
基于BP-LSTM混合网络的智能反窃电装置设计
12
作者 胡东 吕飞春 +2 位作者 胡惊涛 张文涛 武旭 《煤矿机械》 2022年第6期185-188,共4页
针对传统的反窃电检测装置现场使用难度高、排查效果差,提出一种基于BP-LSTM混合网络的智能反窃电检测装置。首先采用BP-LSTM混合网络对评价指标与窃电状态之间的映射关系进行表征,构建混合网络模型;其次根据电磁寻迹检测法的原理设计... 针对传统的反窃电检测装置现场使用难度高、排查效果差,提出一种基于BP-LSTM混合网络的智能反窃电检测装置。首先采用BP-LSTM混合网络对评价指标与窃电状态之间的映射关系进行表征,构建混合网络模型;其次根据电磁寻迹检测法的原理设计反窃电检测装置,该装置由载波定向发射装置和电磁波接收装置组成;最后通过现场实际测试以及经济效益分析,验证了装置具有良好的使用性能,能够准确判断窃电用户,具有较高的实用性和经济性。 展开更多
关键词 BP-LSTM 混合网络模型 电磁寻迹检测法 反窃电检测装置
下载PDF
Feasibility study of the transient electromagnetic method for chamber blasting misfire detection and recognition 被引量:1
13
作者 Liu Liansheng Liang Longhua +2 位作者 Wu Jiyang Jiao Yongbin Lu Zhexiang 《Engineering Sciences》 EI 2014年第6期111-116,共6页
In this paper,transient electromagnetic method was used to carry out the feasibility study on the detection and recognition of chamber blasting misfire.Firstly,an electromagnetic background field was established in th... In this paper,transient electromagnetic method was used to carry out the feasibility study on the detection and recognition of chamber blasting misfire.Firstly,an electromagnetic background field was established in the test;secondly,a benign conductor was preset in the chamber,and then the background field was eliminated after the electromagnetic field was measured;thirdly,the transient electromagnetic field was measured again after blasting;at last,the chamber blasting misfire was detected and recognized by comparing the change of eddy current field of the preset benign conductor before and after blasting.The test results showed that:When the buried depth of aluminum box target was no more than 30 m,transient electromagnetic method can clearly identify the position of the aluminum box;when the buried depth of aluminum box was more than30 m,the buried depth and position of the aluminum box was not sure due to the unknown level of secondary eddy current field generated by aluminum box. 展开更多
关键词 transient electromagnetic methods chamber blasting misfire detection and recognition eddy cur- rent field TARGET
下载PDF
Fine analysis on advanced detection of transient electromagnetic method 被引量:1
14
作者 Wang Bo Liu Shengdong +2 位作者 Yang Zhen Wang Zhijun Huang Lanying 《International Journal of Mining Science and Technology》 SCIE EI 2012年第5期669-673,共5页
Fault fracture zones and water-bearing bodies in front of the driving head are the main disasters in mine laneways,thus it is important to perform their advanced detection and prediction in advance in order to provide... Fault fracture zones and water-bearing bodies in front of the driving head are the main disasters in mine laneways,thus it is important to perform their advanced detection and prediction in advance in order to provide reliable technical support for the excavation.Based on the electromagnetic induction theory,we analyzed the characteristics of primary and secondary fields with a positive and negative wave form of current,proposed the fine processing of the advanced detection with variation rate of apparent resistivity and introduced in detail the computational formulae and procedures.The result of physical simulation experiments illustrate that the tectonic interface of modules can be judged by first-order rate of apparent resistivity with a boundary error of 5%,and the position of water body determined by the fine analysis method agrees well with the result of borehole drilling.This shows that in terms of distinguishing structure and aqueous anomalies,the first-order rate of apparent resistivity is more sensitive than the secondorder rate of apparent resistivity.However,some remaining problems are suggested for future solutions. 展开更多
关键词 Mine laneway Advanced detection Fine processing First-order rate
下载PDF
连铸钢包下渣检测方法的研究现状与进展 被引量:28
15
作者 李培玉 赵明祥 《炼钢》 CAS 北大核心 2003年第3期51-55,共5页
对近几年来国内外连铸钢包下渣自动检测方法的研究现状进行了回顾 ,简述了称重检测法、电磁检测法、超声波检测法、振动检测法的原理及其使用局限性 。
关键词 连铸 钢包下渣 检测方法 研究现状 称重检测法 电磁检测法 超声波检测法 振动检测法
原文传递
触头轴向通电MT法在炼油预制管道上的应用 被引量:1
16
作者 雒里柯 《无损探伤》 2010年第5期34-35,共2页
对常规夹钳通电磁粉检测法进行技术上的改进,对检测盲区进行分析并提出补救措施。
关键词 无缝碳钢钢管 劳动效率 触头轴向通电磁检测法 盲区
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部