测定电离复合速率常数的激波管方法

发展了测定电离复合速率常数的一种新的激波管方法。在这一方法中使用反射激波加热预混气体使之电离,相继用可控制的强稀疏波使之快速冷却,冷却速度很快,可达106K/s, 使之在冷却过程中,电离远离平衡态。用压电传感器和Langmuir 探针监测状态变化历程和离子浓度,并可获得过程中所有的状态参数。测定了NO+ + e 电离复合速率常数。

新型单光子电离和光电子电离复合电离源的研究及应用

复合电离源在单光子电离模式下可以产生分子离子信号,易于确定分子量;在光电子电离模式下,70eV电子能量可以产生含有物质结构信息的碎片峰,实现物质的结构鉴定。两种电离模式可以实现毫秒级迅速切换。本研究通过提高光程降低了单光子电离模式下的检出限。在单光子电离模式下,对苯的检出限为50"g/m3(累加时间为4s);光电子电离模式下,对SO2的检出限为20"L/m3(累加时间4s)。利用复合电离源的单光子电离模式分析了烷烃催化脱氢产物,成功实现了碳链长度为8～12的烷烃,烯烃和二烯烃的在线分析和监测。此外,还利用低能电子的光电子电离模式分析了高压变压器保护气,检测了主要杂质成分,为高压变压器中故障的快速诊断提供依据。

合并式电离-复合反应的 DSMC 模拟

采用ＤＳＭＣ方法研究分子碰撞反应机理，在分子水平上模拟绝热封闭体系合并式电离－复合反应的弛豫过程。ＤＳＭＣ结果与反应动力学理论结果相符，验证了本文所用的ＤＳＭＣ仿真模型是合理的。

恒星表面层内He^+、He^(2+)电离复合的随机过程研究

一、前言 恒星是一个远离平衡态的开放系统。这样的开放系统其结构和演化有许多有趣的特征。恒星振荡是其中重要特征之一。Zhevakin等人(1953)指出,恒星振荡可能受激于氦的电离区(He^+),Baker和Kippenhahn(1962)等人的线性非绝热计算证实了Zhevakin的结论。

二维液相色谱-质谱联用分离中药复方葛根芩连汤中的有效成分

建立了二维液相色谱-质谱联用方法分离中药复方葛根芩连汤的成分。以CN柱作第一维色谱柱,水和甲醇梯度洗脱分离;以ODS柱作第二维色谱柱,20mmol/L乙酸铵缓冲液和乙腈梯度洗脱分离;质谱检测采用电喷雾电离/大气压化学电离(ESI/APCI)复合离子源,正负离子扫描。实验结果表明搭建的二维液相色谱的峰容量显著高于一维色谱,分离效率得到了明显的提高。以第一维色谱的第3个流分为例,对其二维分离进行仔细分析,发现质谱比紫外光谱检测到的组分多,质谱中采用负离子模式比正离子模式检测到的组分多。表明搭建的二维液相色谱-质谱分离平台分离效果好,提高了液相色谱的峰容量和分离效率。该方法操作简便,可作为中药等复杂体系分离分析的有效手段。

由宽波段多光子作用产生的锂原子高位态辐射

本文报道了以６２０．０～６６０．０ｎｍ范围内任意波长激光作用下产生的锂原子高位态辐射的实验结果，并对有关的激发机制进行了讨论。

Time-resolved photoluminescence of anatase/rutile TiO_2 phase junction revealing charge separation dynamics

Junctions are an important structure that allows charge separation in solar cells and photocatalysts. Here, we studied the charge transfer at an anatase/rutile TiO2 phase junction using time-resolved photoluminescence spectroscopy. Visible （-S00 nm） and near-infrared （NIR, -830 nm） emissions were monitored to give insight into the photoinduced charges of anatase and rutile in the junction, respectively, New fast photoluminescence decay components appeared in the visible emission of futile-phase dominated TiO2 and in the NIR emission of many mixed phase TiO2samples. The fast decays confirmed that the charge separation occurred at the phase junction. The visible emission intensity from the mixed phase TiO2 increased, revealing that charge transfer from rutile to anatase was the main pathway. The charge separation slowed the microsecond time scale photolumines- cence decay rate for charge carriers in both anatase and rutile. However, the millisecond decay of the charge carriers in anatase TiO2 was accelerated, while there was almost no change in the charge carrier dynamics of rutile TiO2. Thus, charge separation at the anatase/rutile phase junction caused an increase in the charge carrier concentration on a microsecond time scale, because of slower electron-hole recombination. The enhanced photocatalytic activity previously observed at ana- tase/rutile phase junctions is likely caused by the improved charge carrier dynamics we report here. These findings may contribute to the development of improved photocatalytic materials.

金等离子体中连续可逆的电离-复合过程及离子电荷分布

提出用离化复合动力学理论方法来研究金等离子体内电荷态的分布. 根据由全相对论量子力学理论计算得到的Au48+-Au52+离子的平均离子寿命、能级结构和能级简并度, 进而得到离子的一阶电离速率常数和各离子的配分函数, 由此计算离子间的电离-复合平衡常数. 基于这些数据, 求解离子间连续可逆电离-复合反应的微分方程组, 导出在一定电子温度和电子密度下电荷态的分布和平均离化度, 研究某一时刻金等离子体内电荷态分布随体系电子温度和电子密度的变化. 计算所得平均电离度及离子相对分布与美国Livermore实验室的结果符合较好.

Properties and microstructure of Cu/diamond composites prepared by spark plasma sintering method

Cu/diamond composites have been considered as the next generation of thermal management material for electronic packages and heat sinks applications. Cu/diamond composites with different volume fractions of diamond were successfully prepared by spark plasma sintering（SPS） method. The sintering temperatures and volume fractions（50%, 60% and 70%） of diamond were changed to investigate their effects on the relative density, homogeneity of the microstructure and thermal conductivity of the composites. The results show that the relative density, homogeneity of the microstructure and thermal conductivity of the composites increase with decreasing the diamond volume fraction; the relative density and thermal conductivity of the composites increase with increasing the sintering temperature. The thermal conductivity of the composites is a result of the combined effect of the volume fraction of diamond, the homogeneity and relative density of the composites.

Microstructure and magnetic properties of anisotropic Nd-Fe-B magnets prepared by spark plasma sintering and hot deformation

Bulk anisotropic Nd-Fe-B magnets were prepared from hydrogen-disproportionation-desorption-recombination（HDDR） powders via spark plasma sintering（SPS） and subsequent hot deformation. The influence of sintering temperature on the structure and magnetic properties of the spark plasma sintered Nd-Fe-B magnets were studied. The remanence Br, intrinsic coercivity Hcj, and the maximum energy product（BH）max, of sintered Nd-Fe-B magnets first increase and then decrease with the increase of sintering temperature, TSPS, from 650 °C to 900 °C. The optimal magnetic properties can be obtained when TSPS is 800 °C. The Nd-Fe-B magnet sinter treated at 800 °C was subjected to further hot deformation. Compared with the starting HDDR powders or the SPS treated magnets, the hot-deformed magnets present more obvious anisotropy and possess much better magnetic properties due to the good c-axis texture formed in the deformation process. The anisotropic magnet deformed at 800 °C with 50% compression ratio has a microstructure consisting of well aligned and platelet-shaped Nd2Fe14 B grains without abnormal grain growth and exhibits excellent magnetic properties parallel to the pressing axis.

Effect of arc-ultrasound on microstructures and mechanical properties of plasma arc welded joints of SiC_p/Al MMCs

The effect of arc-ultrasound on microstructures and mechanical properties of SiCp/6061A1 MMCs joints produced by arc-ultrasound plasma arc ＂in-situ＂ alloy-welding with different excitation frequencies was investigated, in which argon-nitrogen mixture was used as plasma gas, Ti wire as filler and the arc-ultrasound was produced by modulating the plasma arc with high frequency. The results show that arc-ultrasound could refine the new reinforced composites such as TiC, TiN significantly, and improve their distribution greatly. And new phase A13Ti becomes finer and less. The test results of mechanical properties indicate that the maximum tensile strength of welded joints is gained when the excitation frequency is 50 kHz, and the maximum is 225 MPa, raising by about 7% comoared with conventional nlasma arc welding （PAW） （20q MPa）.

辐射与发光理论

O432.1 94020775双光子共振激发产生的钾原子紫外辐射=UV radiationgenerated by two-photon resonantexcitation in potassium vapor[刊,中]/梁吉平,贾锁堂,王钢(山西大学物理系)//山西大学学报(自然科学版).-1993,16(4).-395～398报道了钾原子在双光子共振激发下,通过共振电离复合、碰撞能量转换过程、混频过程产生的红外受激辐射和紫外辐射。图4参4(许锦贤)O482.31 94020776多孔硅光致发光研究的最新进展=Recent developmentin research on photoluminescence

Microstructure characteristics and mechanical properties of TiB/Ti-1.5Fe-2.25Mo composites synthesized in situ using SPS process

TiB/Ti-1.5Fe-2.25Mo composites were synthesized in situ using the spark plasma sintering （SPS） method at temperatures of 850-1150 °C. The effect of the sintering temperature on microstructure and mechanical properties of the composites was investigated. The results indicate that the aspect ratio of the in situ synthesized TiB whiskers in Ti alloy matrix decreases rapidly with an increase in sintering temperature. However, both the relative density of the sintered specimens and the volume content of TiB whiskers in composites increase with increasing sintering temperature. Thus, the bending strength of the composites synthesized using SPS process increases slowly with increasing the sintering temperature from 850 to 1150 °C. TiB/Ti-1.5Fe-2.25Mo composite synthesized at 1150 °C using SPS method exhibits the highest bending strength of 1596 MPa due to the formation of fine TiB whiskers in Ti alloy matrix and the dense microstructure of the composite.

Silicon/flake graphite/carbon anode materials prepared with different dispersants by spray-drying method for lithium ion batteries

Silicon/flake graphite/carbon （Si/FG/C） composites were synthesized with different dispersants via spray drying and subsequent pyrolysis, and effects of dispersants on the characteristics of the composites were investigated. The structure and properties of the composites were determined by X-ray diffractometry （XRD）, scanning electron microscopy （SEM） and electrochemical measurements. The results show that samples have silicon/flake graphite/amorphous carbon composite structure, good spherical appearances, and better electrochemical performance than pure nano-Si and FG/C composites. Compared with the Si/FG/C composite using washing powder as dispersant, the Si/FG/C composite using sodium dodecyl benzene sulfonate （SDBS） as dispersant has better electrochemical performance with a reversible capacity of 602.68 mA·h/g, and a capacity retention ratio of 91.58 % after 20 cycles.

基于复合软电离源飞行时间质谱的小型化大气非甲烷烃在线快速监测系统的设计与应用

针对大气非甲烷烃(NMHCs)的时空分布监测需求,并弥补现有监测技术时间分辨率低、体积和功耗较大的不足,本研究自主研发出一套高性能、小型化的大气非甲烷烃在线快速测量系统.该方法基于串联吸附剂在特定温度下对目标物质的富集与解吸,采用单光子/化学复合软电离源飞行时间质谱(SPI/CI-TOFMS)作为分离和检测手段,实现对C_2～C_(10)挥发性有机物的快速分离和检测.通过对标准样品的测量表明:在SPI/CI模式下,C_2～C_(10)物种工作曲线(0～10×10^(-9))拟合优度R^2>0.99,大部分物种方法检出限为1×10^(-12)～80×10^(-12),仪器检出限为1×10^(-12)～35×10^(-12),RSD(n≥10)小于10%.将仪器初步应用于北京大学站点进行定点观测,测量结果与商业化仪器TH-300B离线分析结果吻合.本系统样品分析时间5～12 min可调,整机重量低于40 kg,整机尺寸小于50 cm×50 cm×80 cm,功率低于500 W,可满足大气非甲烷烃的快速监测需求,为提供高分辨率大气NMHCs时空分布数据提供技术支持.

Synthesis and characterization of Na0.44MnO2 nanorods/graphene composite as cathode materials for sodium-ion batteries

Na0.44MnO2 nanorods have been prepared by a hydrothermal method.The experimental parameters have been systematically investigated and optimized.The results show that Na0.44MnO2 nanorods obtained via the hydrothermal treatment at 200℃for 16 h show the best electrochemical properties,which deliver the high initial discharge capacity of 110.7 mA·h/g at 50 mA/g in potential window 2.0-4.0 V.To further improve their electrochemical properties,a ball milling process with graphene has been carried out to obtain Na0.44MnO2/graphene composite.The initial discharge capacity of Na0.44MnO2/graphene composite is 106.9 mA·h/g at a current density of 50 mA/g.After 100 cycles,the residual discharge capacity is 91.8 mA·h/g and the capacity retention rate is 85.9%,which is much higher than that of pristine Na0.44MnO2 nanorods(74.7%)at the same condition.What is more,when the current density reaches 500 and 1000 mA/g,the corresponding discharge capacities of Na0.44MnO2/graphene composite are about 89 and 78 mA·h/g,respectively,indicating outstanding rate capability.

Hydrothermal synthesis and energy storage performance of ultrafine Ce2Sn2O7 nanocubes

Ultrafine cube-shape Ce2Sn2O7 nanoparticles crystallized in pure pyrochlore phase with a size of about 10 nm have been successfully synthesized by a facile hydrothermal method.Conditional experiments have been conducted to optimize the processing parameters including temperature,pH,reaction duration,precipitator types to obtain phase-pure Ce2Sn2O7.The crystal structure,morphology and sizes and specific surface area have been characterized by X-ray diffractometer(XRD),Raman spectrum,transmission electron microscope(TEM),high resolution transmission electron microscope(HRTEM),and Brunauer-Emmett-Teller(BET).The as-synthesized Ce2Sn2O7 ultrafine nanocubes have been evaluated as electrode materials for pseudo-capacitors and lithium ion batteries.When testing as supercapacitors,a high specific capacitance of 222 F/g at 0.1 A/g and a good cycling stability with a capacitance retention of higher than 86%after 5000 cycle have been achieved.When targeted for anode material for lithium ion batteries,the nanocubes deliver a high specific reversible capacity of more than 900 mA·h/g at 0.05C rate.The rate capability and cycling performance is also very promising as compared with the traditional graphite anode.

Oxygen ionic conductivity of a composite electrolyte SDC-LSGM prepared via glycine-nitrate process

Ce0.8Sm0.2O1.9-δ-La0.9Sr0.1Ga0.8Mg0.2O3-δ（SDC-LSGM）is prepared by the glycine-nitrate process（GNP）.SDC-LSGM composite electrolyte samples with different weight ratios are prepared by the co-combustion method so as to obtain homogeneous nano-sized precursor powders. The X-ray diffraction （XRD） and the scan electron microscope （SEM） are used to investigate the phases and microstructures. The measurements and analyses of oxygen ionic conductivity of SDC-LSGM are carried out through the four-terminal direct current （DC） method and the electrochemical impendence spectroscopy, respectively. The optimum weight ratio of SDC-LSGM is 8∶2, of which the ionic conductivity is 0.113 S/cm at 800℃ and the conductivity activation energy is 0.620 eV. The impendence spectra shows that the grain boundary resistance becomes the main barrier for the ionic conductivity of electrolyte at lower temperatures. The appropriate introduction of LSGM to the electrolyte SDC can not only decrease the electronic conductivity but also improve the conditions of the grain and grain boundary, which is advantageous to cause an increase in oxygen ionic conductivity.

Effect of porosity and interface structures on thermal and mechanical properties of SiC_p/6061Al composites with high volume fraction of SiC

50 vol.% SiCp/Al composites with high thermal and mechanical properties were successfully produced by spark plasma sintering technique. The influences of sintering temperature on the thermal conductivity, coefficient of thermal expansion and bending strength of the SiCp/Al composites were carefully investigated. The results show that the SiCp/Al composites sintered at 520℃ exhibits a thermal conductivity of 189 W/(m·K), a coefficient of thermal expansion (50.200℃) of 10.03×10^-6 K^-1 and a bending strength of 649 MPa. The high thermal and mechanical properties can be ascribed to the nearly full density and the well interfacial bonding between the alloy matrix and the SiC particles. This work provides a promising pathway for producing materials to meet the needs of high performance electronic packaging.

Effect of Si content on microstructure and properties of Si/Al composites

Si/Al composites with different Si contents for electronic packaging were prepared by spark plasma sintering （SPS） technique. Properties of the composites were investigated, including density, thermal conductivity, coefficient of thermal expansion and flexural strength. The effects of the Si content on microstructure and thermal and mechanical properties of the composites were studied. The results show that the Si/Al composites consist of Si and Al components and Al uniformly distributes among Si grains. The relative density of the Si/Al composites gradually increases with the decrease of Si content and reaches 98.0% when the Si content is 50%. The thermal conductivity, the coefficient of thermal expansion and the flexural strength of the composite all decrease with the increase of the Si content, and an optimal matching of them is obtained when the Si content is 60%（volume fraction）.