Laser spark obtained by using a conical optics is much more appropriate to form conducting channels in atmosphere. Only two types of lasers are actively considered to be used in forming high-conductivity channels in a...Laser spark obtained by using a conical optics is much more appropriate to form conducting channels in atmosphere. Only two types of lasers are actively considered to be used in forming high-conductivity channels in atmosphere, controlled by laser spark： pulsed sub-microsecond gas and chemical lasers （CO2, DF （deuterium fluoride））, short pulse solid-state and UV （ultraviolet） lasers. Main advantage of short pulse lasers is their ability in forming of super long ionized channels with a characteristic diameter of- 100 mm in atmosphere along the beam propagation direction. At estimated electron densities below 1,016 cm3 in these filaments and laser wavelengths in the range of 0.5-1.0 mm, the plasma barely absorbs laser radiation. In this case, the length of the track composed of many filaments is determined by the laser intensity and may reach many kilometers at a femtosecond pulse energy of-100 mJ. However, these lasers could not be used to form high-conductivity long channels in atmosphere. The ohmic resistance of this type a conducting channels turned out to be very high, and the gas in the channels could not be strongly heated （〈 1 J）. An electric breakdown controlled by radiation of femtosecond solid-state laser was implemented in only at a length of 3 m with a voltage of 2 MV across the discharge gap （670 kV/m）. Not so long ago scientific group from P.N. Lebedev physical institute has improved that result, the discharge gap （-1m） had been broken under KrF laser irradiation when switching high-voltage （up to 390 kV/m） electric discharge by 100-ns UV pulses. Our previous result -16 m long conducting channel controlled by a laser spark at the voltage -3 MV was obtained more than 20 years ago in Russia and Japan by using pulsed CO2 laser with energy -0.5 kJ. An average electric field strength was 〈 190 kV/m. It is still too much for efficient applications.展开更多
Micro-displacement measurement based on self-mixing interference using a fiber laser system was demonstrated. The sinusoidal phase modulation technique was introduced into the fiber laser self-mixing interference meas...Micro-displacement measurement based on self-mixing interference using a fiber laser system was demonstrated. The sinusoidal phase modulation technique was introduced into the fiber laser self-mixing interference measurement system to improve the measurement resolution. The phase could be demodulated by the Fourier analysis method. Error sources were evaluated in detail, and the system was experimentally applied to reconstruct the motion of a high-precision commercial piezoelectric ceramic transducer （PZT）. The displacement measurement resolution was well beyond a half-wavelength. It provides a practical solution for displacement measurement based on all optical-fiber sensing applications with high precision.展开更多
文摘Laser spark obtained by using a conical optics is much more appropriate to form conducting channels in atmosphere. Only two types of lasers are actively considered to be used in forming high-conductivity channels in atmosphere, controlled by laser spark： pulsed sub-microsecond gas and chemical lasers （CO2, DF （deuterium fluoride））, short pulse solid-state and UV （ultraviolet） lasers. Main advantage of short pulse lasers is their ability in forming of super long ionized channels with a characteristic diameter of- 100 mm in atmosphere along the beam propagation direction. At estimated electron densities below 1,016 cm3 in these filaments and laser wavelengths in the range of 0.5-1.0 mm, the plasma barely absorbs laser radiation. In this case, the length of the track composed of many filaments is determined by the laser intensity and may reach many kilometers at a femtosecond pulse energy of-100 mJ. However, these lasers could not be used to form high-conductivity long channels in atmosphere. The ohmic resistance of this type a conducting channels turned out to be very high, and the gas in the channels could not be strongly heated （〈 1 J）. An electric breakdown controlled by radiation of femtosecond solid-state laser was implemented in only at a length of 3 m with a voltage of 2 MV across the discharge gap （670 kV/m）. Not so long ago scientific group from P.N. Lebedev physical institute has improved that result, the discharge gap （-1m） had been broken under KrF laser irradiation when switching high-voltage （up to 390 kV/m） electric discharge by 100-ns UV pulses. Our previous result -16 m long conducting channel controlled by a laser spark at the voltage -3 MV was obtained more than 20 years ago in Russia and Japan by using pulsed CO2 laser with energy -0.5 kJ. An average electric field strength was 〈 190 kV/m. It is still too much for efficient applications.
基金This work was supported by the National Natural Science Foundation of China （Grant No. 91123015, 51405240）, the Specialized Research Fund for the Doctoral Program of Higher Education （20113207110004）, and the Natural Science Foundation of Jiangsu Province（BK20140925）. Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author（s） and source are credited.
文摘Micro-displacement measurement based on self-mixing interference using a fiber laser system was demonstrated. The sinusoidal phase modulation technique was introduced into the fiber laser self-mixing interference measurement system to improve the measurement resolution. The phase could be demodulated by the Fourier analysis method. Error sources were evaluated in detail, and the system was experimentally applied to reconstruct the motion of a high-precision commercial piezoelectric ceramic transducer （PZT）. The displacement measurement resolution was well beyond a half-wavelength. It provides a practical solution for displacement measurement based on all optical-fiber sensing applications with high precision.
