期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
电脉冲调质处理对齿套用35CrMo钢显微组织和力学性能的影响
1
作者 李东方 杨海波 +3 位作者 黄林波 林钰珍 巫少龙 徐文俊 《机械工程材料》 CAS CSCD 北大核心 2019年第12期52-56,61,共6页
在不同回火温度(550~640℃)、不同脉冲次数(1,2次)和脉冲持续时间(60~180ms)下对热轧态35CrMo钢分别进行传统淬火+传统回火、电脉冲淬火+传统回火、传统淬火+电脉冲回火处理,对比研究了处理后的显微组织和力学性能。结果表明:电脉冲淬火... 在不同回火温度(550~640℃)、不同脉冲次数(1,2次)和脉冲持续时间(60~180ms)下对热轧态35CrMo钢分别进行传统淬火+传统回火、电脉冲淬火+传统回火、传统淬火+电脉冲回火处理,对比研究了处理后的显微组织和力学性能。结果表明:电脉冲淬火+550℃传统回火、传统淬火+1次电脉冲回火以及传统淬火+2次电脉冲60ms回火处理后,试验钢的组织与传统淬火+传统回火处理后的相似,均由马氏体和碳化物组成;随着回火温度的升高,电脉冲淬火+传统回火处理后的组织中出现层片状索氏体,试验钢的抗拉强度和硬度降低,伸长率增大;电脉冲淬火或回火均能提高试验钢的强塑性,电脉冲淬火+580℃传统回火处理后的强塑性最佳。 展开更多
关键词 电脉冲淬火 脉冲回火 35CRMO钢 显微组织 强塑性
下载PDF
Analysis of process variations impact on the single-event transient quenching in 65 nm CMOS combinational circuits 被引量:2
2
作者 WANG TianQi XIAO LiYi +1 位作者 ZHOU Bin QI ChunHua 《Science China(Technological Sciences)》 SCIE EI CAS 2014年第2期322-331,共10页
Single-event transient pulse quenching (Quenching effect) is employed to effectively mitigate WSET (SET pulse width). It en- hanced along with the increased charge sharing which is norm for future advanced technol... Single-event transient pulse quenching (Quenching effect) is employed to effectively mitigate WSET (SET pulse width). It en- hanced along with the increased charge sharing which is norm for future advanced technologies. As technology scales, param- eter variation is another serious issue that significantly affects circuit's performance and single-event response. Monte Carlo simulations combined with TCAD (Technology Computer-Aided Design) simulations are conducted on a six-stage inverter chain to identify and quantify the impact of charge sharing and parameter variation on pulse quenching. Studies show that charge sharing induce a wider WSET spread range. The difference of WSET range between no quenching and quenching is smaller in NMOS (N-Channel Metal-Oxide-Semiconductor Field-Effect Transistor) simulation than that in PMOS' (P-Channel Met- N-Oxide-Semiconductor Field-Effect Transistor), so that from parameter variation view, quenching is beneficial in PMOS SET mitigation. The individual parameter analysis indicates that gate oxide thickness (TOXE) and channel length variation (XL) mostly affect SET response of combinational circuits. They bring 14.58% and 19.73% average WSET difference probabilities for no-quenching cases, and 105.56% and 123.32% for quenching cases. 展开更多
关键词 single-event transient (SET) parameter variation Monte Carlo simulation quenching effect charge share
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部