The effects of different Zn contents in Al-Mg alloy on the microstructure characterizations were observed by advanced electron microscopy and the corrosion properties were investigated by the inter-granular corrosion ...The effects of different Zn contents in Al-Mg alloy on the microstructure characterizations were observed by advanced electron microscopy and the corrosion properties were investigated by the inter-granular corrosion tests,the exfoliation corrosion tests,and the Potentiodynamic polarizaion tests.The τ phase(Mg_(32)(Al,Zn)_(49)) forms on the pre-existing Mn-rich particles and at the grain boundaries.According to the theory of binding energy,the formation of τ phase is much easier than that of β phase(Al_3Mg_2),somehow replacing β phase and reducing the possibility of β phase precipitation.This change dramatically decreases the susceptibility of corrosion.The Zn addition increases the corrosion resistance of Al-Mg alloy with an optimal value of 0.31%.When the Zn addition is increased to 0.78%,however,the corrosion resistance of alloy decreases once again but it is still better than that of the alloy without Zn addition.展开更多
Ni-CNT (carbon nanotube) composite coatings were processed by electrodeposition and their hardness and corrosion characteristics were investigated with variations of CNT concentration in an electrolyte solution and el...Ni-CNT (carbon nanotube) composite coatings were processed by electrodeposition and their hardness and corrosion characteristics were investigated with variations of CNT concentration in an electrolyte solution and electrodeposition current density. With increasing the CNT concentration in the electrodeposition bath and the current density, more CNTs are incorporated into Ni matrix. Hardness values of the Ni-CNT coatings are irrelevant to the CNT concentration in the solution, the current density, and current mode, implying poor adhesion of CNTs to Ni matrix. With increasing the CNT content in the coating, the corrosion resistance of the Ni-CNT composite coating becomes inferior due to the porous microstructure.展开更多
基金Project(2011-006)supported by the State Administration of Science,Technology and Industry for National Defence,China
文摘The effects of different Zn contents in Al-Mg alloy on the microstructure characterizations were observed by advanced electron microscopy and the corrosion properties were investigated by the inter-granular corrosion tests,the exfoliation corrosion tests,and the Potentiodynamic polarizaion tests.The τ phase(Mg_(32)(Al,Zn)_(49)) forms on the pre-existing Mn-rich particles and at the grain boundaries.According to the theory of binding energy,the formation of τ phase is much easier than that of β phase(Al_3Mg_2),somehow replacing β phase and reducing the possibility of β phase precipitation.This change dramatically decreases the susceptibility of corrosion.The Zn addition increases the corrosion resistance of Al-Mg alloy with an optimal value of 0.31%.When the Zn addition is increased to 0.78%,however,the corrosion resistance of alloy decreases once again but it is still better than that of the alloy without Zn addition.
基金supported by the Center for Electronic Packaging Materials of Korea Science Engineering Foundation
文摘Ni-CNT (carbon nanotube) composite coatings were processed by electrodeposition and their hardness and corrosion characteristics were investigated with variations of CNT concentration in an electrolyte solution and electrodeposition current density. With increasing the CNT concentration in the electrodeposition bath and the current density, more CNTs are incorporated into Ni matrix. Hardness values of the Ni-CNT coatings are irrelevant to the CNT concentration in the solution, the current density, and current mode, implying poor adhesion of CNTs to Ni matrix. With increasing the CNT content in the coating, the corrosion resistance of the Ni-CNT composite coating becomes inferior due to the porous microstructure.
