利用ZnS…Cu电致发光粉末与环氧树脂胶混合,设计制作了一种梯形电极结构的电压传感单元,实现了电致发光电压传感器输出信号的温度漂移补偿。电致发光电压传感信号通过2根塑料光纤传输到2个硅光电探测器,并选择其开路电压作为传感器的输...利用ZnS…Cu电致发光粉末与环氧树脂胶混合,设计制作了一种梯形电极结构的电压传感单元,实现了电致发光电压传感器输出信号的温度漂移补偿。电致发光电压传感信号通过2根塑料光纤传输到2个硅光电探测器,并选择其开路电压作为传感器的输出信号。在同一外加电压条件下,梯形电极区域内的电场分布是不均匀的,因而不同场点的发光亮度不同。通过测量梯形电极区域内2个不同发光点的发光强度随外加电压的变化,并对两路输出电压传感信号进行数据拟合与计算,可获知被测电压的有效值,并可实现对输出信号温度漂移的补偿。在-40~60℃范围内,采用上述温度漂移补偿方法测量了有效值在0.7~1.5 k V范围内的工频电压,传感器输出信号的非线性误差低于1.6%,验证了该温度漂移补偿方法的有效性。展开更多
A transparent 3-mercaptopropyl trimethoxysilane(MPTMS)/Ag/MoO3 composite anode is introduced to fabricate green organic light-emitting diodes(OLEDs). Effects of the composite anode on brightness and operating voltage ...A transparent 3-mercaptopropyl trimethoxysilane(MPTMS)/Ag/MoO3 composite anode is introduced to fabricate green organic light-emitting diodes(OLEDs). Effects of the composite anode on brightness and operating voltage of OLEDs are researched. By optimizing the thickness of each layer of the MPTMS/Ag/MoO3 structure, the transmittance of MPTMS/Ag(8 nm)/Mo O3(30 nm) reaches over 75% at about 520 nm. The sheet resistance is 3.78 ?/□, corresponding to this MPTMS/Ag(8 nm)/MoO3(30 nm) structure. For the OLEDs with the optimized anode, the maximum electroluminescence(EL) current efficiency reaches 4.5 cd/A, and the maximum brightness is 37 036 cd/m2. Moreover, the OLEDs with the optimized anode exhibit a very low operating voltage(2.6 V) for obtaining brightness of 100 cd/m2. We consider that the improved device performance is mainly attributed to the enhanced hole injection resulting from the reduced hole injection barrier height. Our results indicate that employing the MPTMS/Ag/MoO3 as a composite anode can be a simple and promising technique in the fabrication of low-operating voltage and high-brightness OLEDs.展开更多
文摘利用ZnS…Cu电致发光粉末与环氧树脂胶混合,设计制作了一种梯形电极结构的电压传感单元,实现了电致发光电压传感器输出信号的温度漂移补偿。电致发光电压传感信号通过2根塑料光纤传输到2个硅光电探测器,并选择其开路电压作为传感器的输出信号。在同一外加电压条件下,梯形电极区域内的电场分布是不均匀的,因而不同场点的发光亮度不同。通过测量梯形电极区域内2个不同发光点的发光强度随外加电压的变化,并对两路输出电压传感信号进行数据拟合与计算,可获知被测电压的有效值,并可实现对输出信号温度漂移的补偿。在-40~60℃范围内,采用上述温度漂移补偿方法测量了有效值在0.7~1.5 k V范围内的工频电压,传感器输出信号的非线性误差低于1.6%,验证了该温度漂移补偿方法的有效性。
基金supported by the National Natural Science Foundation of China(No.21174036)the National High Technology Research and Development Program of China(863 Program)(No.2012AA011901)the National Basic Research Program of China(973 Program)(No.2012CB723406)
文摘A transparent 3-mercaptopropyl trimethoxysilane(MPTMS)/Ag/MoO3 composite anode is introduced to fabricate green organic light-emitting diodes(OLEDs). Effects of the composite anode on brightness and operating voltage of OLEDs are researched. By optimizing the thickness of each layer of the MPTMS/Ag/MoO3 structure, the transmittance of MPTMS/Ag(8 nm)/Mo O3(30 nm) reaches over 75% at about 520 nm. The sheet resistance is 3.78 ?/□, corresponding to this MPTMS/Ag(8 nm)/MoO3(30 nm) structure. For the OLEDs with the optimized anode, the maximum electroluminescence(EL) current efficiency reaches 4.5 cd/A, and the maximum brightness is 37 036 cd/m2. Moreover, the OLEDs with the optimized anode exhibit a very low operating voltage(2.6 V) for obtaining brightness of 100 cd/m2. We consider that the improved device performance is mainly attributed to the enhanced hole injection resulting from the reduced hole injection barrier height. Our results indicate that employing the MPTMS/Ag/MoO3 as a composite anode can be a simple and promising technique in the fabrication of low-operating voltage and high-brightness OLEDs.
