电荷载作用下的功能梯度压电圆球的状态空间解

基于状态空间的研究受电荷载作用的功能梯度空心圆球,在平衡方程、热弹性方程、热传导方程和静电电荷方程的基础上,建立了状态方程,得到了状态空间解。考虑只受电荷载作用时的径向位移、电势和应力的变化,与相关文献进行了对比,同时考虑层合圆球不同材料作用时的径向应力、位移和电势的变化情况,得到了半解析解。相关算例分析表明,本文所用的方法用于电荷载作用的弹性问题时结果正确,且计算效率高,适用于求解受电荷载作用的功能梯度空心圆球。

功能梯度热释电材料平板柱形弯曲问题的精确解

采用状态空间法 ,假定材料常数沿厚度方向均按同一指数函数规律变化 ,获得了功能梯度热释电材料平板柱形弯曲问题的精确解。通过算例 ,分析了在机械荷载、电荷载和热荷载分别作用下 。

Buckling behavior of micro metal wire on polymer membrane under combined effect of electrical loading and mechanical loading

The buckling behavior of a typical structure consisting of a micro constantan wire and a polymer membrane under coupled electrical-mechanical loading was studied. The phenomenon that the constantan wire delaminates from the polymer membrane was observed after unloading. The interfacial toughness of the constantan wire and the polymer membrane was estimated. Moreover, several new instability modes of the constantan wire could be further triggered based on the buckle-driven delamination. After electrical loading and tensile loading, the constantan wire was likely to fracture based on buckling. After electrical loading and compressive loading, the constantan wire was easily folded at the top of the buckling region. On the occasion, the constantan wire buckled towards the inside of the polymer membrane under electrical-compressive loading. The mechanisms of these instability modes were analyzed.

FINITE ELEMENT MODELING OF MODERATELY THICK COMPOSITE PLATE WITH PIEZOELECTRIC SENSORS AND ACTUATORS

A rectangular finite element for laminated plate with bonded and/or embedded piezoelectric sensors and actuators is developed based on the variational principle and the first order shear deformation theory. The element has four-node, 20-degrees-of-freedom with one potential degree of freedom for each piezoelectric layer to represent the piezoelectric behavior. The higher order derivation of deflection is obtained by using the normal rotation expressions to take the effects of transverse shear deformation into considerations. The finite element can accurately simulate the deformation of both thin and moderately thick plates. A Fortran program is written and a number of benchmark tests are exercised to verify its effectiveness. Results are compared well with the existing data. The unbalanced composite with piezoelectric layers is then analyzed by using the model. Results show that the changes of the ratio between the thickness of positive angle layers and the negative angle layers have an effect on the deformation of the structure under the same electric loading.

Characterization of Oxide Charge During Hot-Carrier Degradation of Ultrathin Gate pMOSFETs--Investigated by Charge Pumping Technique

The generation of oxide charge for 4nm pMOSFETs under hot-carrier stress is investigated by the charge pumping measurements.Firstly,the direct experimental evidences of logarithmic time dependence of hole trapping is observed for pMOSFETs with different channel lengths under hot-carrier stress.Thus,the relationships of oxide charge generation,including electron trapping and hole trapping effects,with different stress voltages and channel lengths are analyzed.It is also found that there is a two-step process in the generation of oxide charge for pMOSFETs.For a short stress time,electron trapping is predominant,whereas for a long stress time,hole trapping dominates the generation of oxide charge.

Photocatalytic hydrogen evolution activity over MoS_2/ZnIn_2S_4 microspheres

MoS2/ZnIn2S4composites with MoS2anchored on the surface of ZnIn2S4microspheres were synthesized by a two‐step hydrothermal process.The obtained samples were characterized by X‐ray diffraction,field emission scanning electron microscopy,energy dispersive X‐ray spectroscopy,high‐resolution transmission electron microscopy,X‐ray photoelectron spectroscopy,Raman spectroscopy,ultraviolet–visible diffuse reflectance absorption spectroscopy,nitrogen adsorption–desorption measurements,photoluminescence spectroscopy,and photoelectrochemical tests.The influence of the loading of MoS2on the photocatalytic H2evolution activity was investigated using lactic acid as a sacrificial reagent.A H2evolution rate of343μmol/h was achieved under visible light irradiation over the1wt%MoS2/ZnIn2S4composite,corresponding to an apparent quantum efficiency of about3.85%at420nm monochromatic light.The marked improvement of the photocatalytic H2evolution activity compared with ZnIn2S4can be ascribed to efficient transfer and separation of photogenerated charge carriers and facilitation of the photocatalytic H2evolution reaction at the MoS2active sites.

Analytical solutions of simply supported magnetoelectroelastic circular plate under uniform loads

In this paper, the axisymmetric general solutions of transversely isotropic magnetoelectroelastic media are expressed with four harmonic displacement functions at first. Then, based on the solutions, the analytical three-dimensional solutions are provided for a simply supported magnetoelectroelastic circular plate subjected to uniform loads. Finally, the example of circular plate is presented.

Multiple objective particle swarm optimization technique for economic load dispatch

A multi-objective particle swarm optimization (MOPSO) approach for multi-objective economic load dispatch problem in power system is presented in this paper. The economic load dispatch problem is a non-linear constrained multi-objective optimization problem. The proposed MOPSO approach handles the problem as a multi-objective problem with competing and non-commensurable fuel cost, emission and system loss objectives and has a diversity-preserving mechanism using an external memory (call “repository”) and a geographically-based approach to find widely different Pareto-optimal solutions. In addition, fuzzy set theory is employed to extract the best compromise solution. Several optimization runs of the proposed MOPSO approach were carried out on the standard IEEE 30-bus test system. The results revealed the capabilities of the proposed MOPSO approach to generate well-distributed Pareto-optimal non-dominated solutions of multi-objective economic load dispatch. Com- parison with Multi-objective Evolutionary Algorithm (MOEA) showed the superiority of the proposed MOPSO approach and confirmed its potential for solving multi-objective economic load dispatch.

Spin-Polarized Carriers Injection from Ferromagnetic Metal into Organic Semiconductor

Charge carriers in organic semiconductor are different from that of traditional inorganic semiconductor. Based on three-current model, considering electrical field effect, we present a theoretical model to discuss spin-polarized injection from ferromagnetic electrode into organic semiconductor by analyzing electrochemical potential both in ferromagnetic electrode and organic semiconductors. The calculated result of this model shows effects of electrode＇s spin polarization, equilibrium value of polarons ratio, interracial conductance, bulk conductivity of materials and electrical field. It is found that we could get decent spin polarization with common ferromagnetic electrode by increasing equilibrium value of polarons ratio. We also find that large and matched bulk conductivity of organic semiconductor and electrode, small spin-dependent interracial conductance, and enough large electrical field are critical factors for increasing spin polarization.

Study on longitudinal wind load calculation method of cables for cable-stayed bridge

Along with the expanding of span of cable-stayed bridge,wind load becomes a more and more important controlling factor for bridge the design.A very large proportion of the wind load acting on cables has exceeded that acting on deck.There was not any detailed prescript in Chinese code for calculation of longitudinal wind load on cables due to lack of theoretical research and experiment,and conservative simplified calculation was adopted during design,which leads to conservative and uneconomical design of structures.To resolve this problem,cable force experiment was carried out during the design of Sutong Bridge.By comparing with international research results,the calculation formula of longitudinal wind drag coefficient for cables was advanced to fill the blank of bridge wind resistant code of China,and has already been adopted in the Highway Bridge Wind Resistant Design Code(JTG/T D60-01-2004)with great significance for bridge engineering.

Polarons in Bi12.47Al0.53O19.5

Electrical conductivity and dielectric properties of bismuth aluminate, Bi12.47Al0.53O19.5 （BAO）, were investigated in the frequency range from 1 Hz to 1 MHz in the temperature range from 420 K to 5 K. In the temperature range from 360 K to 220 K the real part of the complex ac electrical conductivity and dielectric constant follow the universal dielectric response （UDR）, being typical for hopping or tunneling of localized charge carriers. A detailed analysis of the temperature dependence of the UDR parameter s in terms of the theoretical model for tunneling of small polarons revealed that below 360 K this mechanism governs the charge transport in this material. The characteristic parameters for polarons, W∞, ιo, and ι0 were determined.

A method for real power transfer allocation using multivariable regression analysis

A multivariable regression(MVR) approach is proposed to identify the real power transfer between generators and loads.Based on solved load flow results,it first uses modified nodal equation method(MNE) to determine real power contribution from each generator to loads.Then,the results of MNE method and load flow information are utilized to determine suitable regression coefficients using MVR model to estimate the power transfer.The 25-bus equivalent system of south Malaysia is utilized as a test system to illustrate the effectiveness of the MVR output compared to that of the MNE method.The error of the estimate of MVR method ranges from 0.001 4 to 0.007 9.Furthermore,when compared to MNE method,MVR method computes generator contribution to loads within 26.40 ms whereas the MNE method takes 360 ms for the calculation of same real power transfer allocation.Therefore,MVR method is more suitable for real time power transfer allocation.

Influences on Generation of White Etching Crack Networks in Rolling Bearings

In rare cases rolling bearings fail by WEC （white etching crack） damage before reaching their calculated rating life, if so called additional loads are applied on the bearing in addition to the normal Hertzian stress （PHz）. A number of additional loads have been identified by means of tests with rolling bearings. These can be small direct currents as a result of electrostatic charge or large alternating currents from inverter-fed drives that unintentionally flow through the bearing. WEC damages can also be initiated by a pure mechanical additional load which is dependent on factors including the bearing kinematics but also on the dynamics of the drive train. The current state of knowledge on this subject is presented and taken as the basis for developing a hypothesis on the WEC damage mechanism. If load situations critical for WEC cannot be avoided, the risk of WEC can be considerably reduced by the selection of suitable materials and coatings as well as, in some cases, of suitable lubricants.

Microstructure and Mechanical Properties of Ti-4Al-1.5Mn Resistance Spot Welding Joints

Ti-4Al-1.5Mn dual phase titanium alloy sheet was spot welded by pneumatic resistance spot welder.The effects of different welding parameters on shear load and nugget diameter were studied.The results show that the maximum shear load of solder joint increases first and then decreases with the increase of electrode pressure and welding current,while the nugget diameter increases with the increase of electrode pressure and welding current.Electrode pressure of 0.20 MPa and welding current of 46 A are the optimal process parameters,under which the maximum shear load of solder joint reaches 8.80 kN.The microstructure of nugget zone is coarse acicular martensite,and the solder joints fail in a mixed mode of intergranular brittle-ductile fracture.

Measurement-based approach for identification of static load model of electric power system

The validity of electric power system simulation or prediction models depends on static load model. Measurement- based approach is the unique method to identify them adequately. The measured power depends on both load reaction to supply voltage alteration and random process of load alteration Basically, there is no any universal method that can single out the inherent static load model from experimental data. The paper offers a proprietary technique which is the particular solution of the task. The technique considers the selection of neighboring measurement pairs with the supply voltage altering significantly be-tween them, the exclusion of selected pairs by load power factor and subsequent selection of the inherent static load model presented as the polynomial load model. The usage of the technique to identify static load model at “Fenster” industrial enterprise （in Borisov city） is presented. The ideas considered in the paper can be used for future development of static load model identification methods with the data obtained during both active experiment and in other operating models of electric power systems.

Wavelet time series MPARIMA modeling for power system short term load forecasting

The wavelet power system short term load forecasting(STLF) uses a mulriple periodical autoregressive integrated moving average(MPARIMA) model to model the mulriple near periodicity, nonstationarity and nonlinearity existed in power system short term quarter hour load time series, and can therefore accurately forecast the quarter hour loads of weekdays and weekends, and provide more accurate results than the conventional techniques, such as artificial neural networks and autoregressive moving average(ARMA) models test results. Obtained with a power system networks in a city in Northeastern part of China confirm the validity of the approach proposed.

An Experimental Study for Inverse Load Reconstruction

This paper performs an experimental study for inverse load reconstruction. By measuring and analyzing the load characteristics of different home and office electric devices, the author shows that a reconstruction of the individual power consumption of different loads from the total measurement of a single power meter is possible.

Elastic stability of shallow pin-ended parabolic arches subjected to step loads

Buckling could be induced when shallow arches were subjected to vertical step loads. In-plane static and dynamic buckling of shallow pin-ended parabolic arches with a horizontal cable was investigated. Based on the equations of motion derived from Hamilton's principle, nonlinear equilibrium equations and static buckling equilibrium equations were deduced. Through the pseudo-static analysis, approximate solutions to the lower and upper dynamic buckling loads under step loads were obtained, for shallow parabolic arches. The results show that dynamic buckling and snap-through buckling are impossible when modified slenderness ratio λ<λc and λ>λs, where λc and λs denote critical slenderness ratios of bucking and snap-through buckling, respectively; effects of the stiffness of the horizontal cable on the dynamic buckling are significant; and the dynamic buckling loads under a equivalent central concentrated step load are lower than the loads under a distributed load appreciably.

风荷载作用下输电线电塔边坡稳定性分析

该文以镇江长江沿岸五峰山输电线电塔边坡为例,用毕肖普法讨论了在输电线电塔风荷载竖向力与水平力作用下,土体性质改变对边坡稳定性的影响。根据桩基布设位置、滑动面位置和桩端持力层的不同,风荷载作用下输电线电塔对边坡稳定性的影响分为三种模式:桩基础在计算产生的滑坡体内,产生的塑性区未接触到滑动面;桩基础在计算产生的滑坡体内,产生的塑性区接触到了滑动面;桩基础不在计算产生的滑坡体内。并对这三种模式进行了分析和评价。

A Viable Megawatt-Class Space Power Plant under Rankine Cycle

The aim of the article concerns to the achieved research results regarding the viability of a megawatt-class space power plant based on the Rankine cycle for which the main objectives are to highlight the key issues responsible for improving the Rankine cycle efficiency. Two working fluids are studied （water and ammonia） on the basis of its well known characteristics. Cycles operating under top and bottom temperatures approaching the state of the art technology associated to cooling fluid reservoirs are key to improve the efficiency. With such strategy, the achieved thermal efficiency increases more than 20% with respect to conventional power plants. Mentioned benefits associated to the strategy based on the reduction of the required payload capacity, the condenser radiation surface and the power plant mass represent the main advantages of the proposed innovation techniques.