The stoichiometric ratios and related regimes, which can promote anti-flooding of polymer electrolyte membrane fuel cell （PEMFC） with in-plate adverse-flow flow-field （IPAF）, were investigated. Two flow combinatio...The stoichiometric ratios and related regimes, which can promote anti-flooding of polymer electrolyte membrane fuel cell （PEMFC） with in-plate adverse-flow flow-field （IPAF）, were investigated. Two flow combinations, which are the simple and complex adverse-flow between plates （ABP） that can be realized by IPAF, were employed. Constant stoichiometric ratios examination indicates that the complex ABP could improve anti-flooding of PEMFC better in the medium （greater than 200 mA/cm2 and less than 1 000 mA/cm2） and high （greater than 1 000 mA/cm2） current densities than the simple ABP. More stoichiometric ratios were introduced to find the cathode critical stoichiometry. Under the condition of cathode critical stoichiometry, the maximal local relative humidity of both electrodes of complex ABP is equal to 100% and below while the anti-flooding of the cathode of simple ABP is not satisfactory in the medium and high current densities. Further study shows that the mechanism of fuel cell, which is the imerdependence between the electrodes effect, can make significant contribution to anti-flooding.展开更多
To improve the corrosion resistance of titanium(Ti)bipolar plate,titanium nitride(TiN)film was prepared on the surface of commercial TA1 pure titanium by magnetron reactive sputtering and pulse laser deposition(PLD)te...To improve the corrosion resistance of titanium(Ti)bipolar plate,titanium nitride(TiN)film was prepared on the surface of commercial TA1 pure titanium by magnetron reactive sputtering and pulse laser deposition(PLD)techniques,and the film prepared under different process parameters were evaluated.Results show that dense and complete TiN film can be obtained on TA1 surface under different preparation processes,and the corrosion current density of Ti substrate significantly increases.However,the composition of the film prepared by magnetron reactive sputtering is affected by the oxygen competition reaction,and its homogeneity is inferior to that of the film prepared by PLD.The comprehensive performance of the PLD-prepared film shows excellent characteristics in the terms of low corrosion current density(0.025μA·cm^(−2)),moderate corrosion overpotential(−0.106 V),and good hydrophobicity.展开更多
基金Project(20976095) supported by the National Natural Science Foundation of ChinaProject(2012CB215500) supported by the National Basic Research Program of China+1 种基金Project(20090002110074) supported by the Specialized Research Fund for the Doctoral Program of Higher Education, ChinaProjects(2012AA1106012, 2012AA053402) supported by the National Hi-tech Research and Development Program of China
文摘The stoichiometric ratios and related regimes, which can promote anti-flooding of polymer electrolyte membrane fuel cell （PEMFC） with in-plate adverse-flow flow-field （IPAF）, were investigated. Two flow combinations, which are the simple and complex adverse-flow between plates （ABP） that can be realized by IPAF, were employed. Constant stoichiometric ratios examination indicates that the complex ABP could improve anti-flooding of PEMFC better in the medium （greater than 200 mA/cm2 and less than 1 000 mA/cm2） and high （greater than 1 000 mA/cm2） current densities than the simple ABP. More stoichiometric ratios were introduced to find the cathode critical stoichiometry. Under the condition of cathode critical stoichiometry, the maximal local relative humidity of both electrodes of complex ABP is equal to 100% and below while the anti-flooding of the cathode of simple ABP is not satisfactory in the medium and high current densities. Further study shows that the mechanism of fuel cell, which is the imerdependence between the electrodes effect, can make significant contribution to anti-flooding.
基金National Key Research and Development Program of China(2022YFB4002100)。
文摘To improve the corrosion resistance of titanium(Ti)bipolar plate,titanium nitride(TiN)film was prepared on the surface of commercial TA1 pure titanium by magnetron reactive sputtering and pulse laser deposition(PLD)techniques,and the film prepared under different process parameters were evaluated.Results show that dense and complete TiN film can be obtained on TA1 surface under different preparation processes,and the corrosion current density of Ti substrate significantly increases.However,the composition of the film prepared by magnetron reactive sputtering is affected by the oxygen competition reaction,and its homogeneity is inferior to that of the film prepared by PLD.The comprehensive performance of the PLD-prepared film shows excellent characteristics in the terms of low corrosion current density(0.025μA·cm^(−2)),moderate corrosion overpotential(−0.106 V),and good hydrophobicity.
