The special experimental device and sulfuric acid electrolyte were adopted to study the influence of anodic oxidation heat on hard anodic film for 2024 aluminum alloy. Compared with the oxidation heat transferred to t...The special experimental device and sulfuric acid electrolyte were adopted to study the influence of anodic oxidation heat on hard anodic film for 2024 aluminum alloy. Compared with the oxidation heat transferred to the electrolyte through anodic film, the heat transferred to the coolant through aluminum substrate is more beneficial to the growth of anodic film. The film forming speed, film thickness, density and hardness are significantly increased as the degree of undercooling of the coolant increases. The degree of undercooling of the coolant, which is necessary for the growth of anodic film, is related to the degree of undercooling of the electrolyte, thickness of aluminum substrate, thickness of anodic film, natural parameters of bubble covering and current density. The microstructure and performance of the oxidation film could be controlled by the temperature of the coolant.展开更多
Aluminum capacitor foils with a tunnel etch structure were reacted with boiling water and then anodized at 530 V in boric acid solution or boric acid＋citric acid mixed solution.The microstructure and crystallinity of...Aluminum capacitor foils with a tunnel etch structure were reacted with boiling water and then anodized at 530 V in boric acid solution or boric acid＋citric acid mixed solution.The microstructure and crystallinity of the resulting anodized film were examined by TEM and XRD.The special capacitance,resistance and withstanding voltage of the film were explored with electrochemical impedance spectroscopy（EIS）,LCR meter and small-current charging.The results show that the high voltage anodized oxide film consists of an inner layer with high crystallinity and an outer layer with low crystallinity.However,the crystallinity of the film formed in boric acid＋citric acid mixed solution is higher than that of the film formed in only boric acid solution,leading to an increase in film＇s field strength and special capacitance.Meanwhile,there are more defects from phase transformation in the out layer of the film formed in boric acid＋citric acid mixed solution than in that of film formed in only boric acid solution,leading to a decrease in film＇s resistance and withstanding voltage.展开更多
Consumable carbon anodes are used in the electrowinning of aluminium by the Hall-Heroult process. Emissions of CO2 may be eliminated by introducing an inert oxygen evolving anode, which however will require a higher a...Consumable carbon anodes are used in the electrowinning of aluminium by the Hall-Heroult process. Emissions of CO2 may be eliminated by introducing an inert oxygen evolving anode, which however will require a higher anode potential. An alternative approach is to use a natural gas or hydrogen gas anode to reduce the CO2 emissions and lower the anode potential. Preliminary laboratory experiments were carried out in an alternative molten salt electrolyte consisting of CaCl2-CaO-NaCl at 680℃ Porous anodes of platinum and tin oxide were tested during electrolysis at constant current. The behaviour of inert anode candidate materials such as tin oxide and nickel ferrite were also studied.展开更多
The CaO-doped Cu/（NiFe2O4-10NiO） cermet inert anodes were prepared by the cold isostatie pressing-sintering process, and their corrosion resistance to Na3AlF6-K3AlF6-Al203 melt was studied. The results show that the...The CaO-doped Cu/（NiFe2O4-10NiO） cermet inert anodes were prepared by the cold isostatie pressing-sintering process, and their corrosion resistance to Na3AlF6-K3AlF6-Al203 melt was studied. The results show that the relative density of 5Cu/（NiFe2O4-10NiO） cermet sintered at 1 200 ℃ increases from 82.83% to 97.63% when 2% CaO （mass fraction） is added. During the electrolysis, the relative density of cermet inert anode descends owing to the chemical dissolution of additive CaO at ceramic grain boundary, which accelerates the penetration of electrolyte. Thus, the corrosion resistance to melts of Cu/（NiFe2O4-10NiO） cermet inert anode is reduced. To improve the corrosion resistance of the cermet inert anode, the content of CaO doped should be decreased and the technology of cleaning the ceramic grain boundary should be applied.展开更多
A novel Ti-based Ti-Mn composite anode used for electrolytic manganese dioxide(EMD) fabrication was developed by a two-step heating manganizing technique.The effects of sintering temperature on the manganized microstr...A novel Ti-based Ti-Mn composite anode used for electrolytic manganese dioxide(EMD) fabrication was developed by a two-step heating manganizing technique.The effects of sintering temperature on the manganized microstructure and the performance of the composite anode were studied by scanning electron microscopy(SEM),mechanical properties tests at room temperature and electrochemical methods.The results show that the thickness of the diffusion layer increases with the increase of sintering temperature up to 1 100 °C;whereas,the surface Mn content increases and reaches the maximum at 1 000 °C and then decreases thereafter.Lower surface Mn content is beneficial for the enhanced corrosion resistance and lowered open cell voltage in electrolytic process.The new anode prepared under the optimized conditions has been applied in industry and exhibits superior economic benefits to conventional Ti anodic materials.展开更多
Solar-driven photoelectrochemical(PEC) water splitting is a promising technology for sustainable hydrogen production, which relies on the development of efficient and stable photoanodes for water oxidation reaction. T...Solar-driven photoelectrochemical(PEC) water splitting is a promising technology for sustainable hydrogen production, which relies on the development of efficient and stable photoanodes for water oxidation reaction. The thickness and microstructure of semiconductor films are generally crucial to their PEC properties. Herein, three-dimensional(3D) interconnected nanoporous Ta3N5 film photoanodes with controlled thickness were successfully fabricated via galvanostatic anodization and NH3 nitridation. The porous Ta3N5 nanoarchitectures(NAs) of 900 nm in thickness showed the highest PEC performance due to the optimal lightharvesting and charge separation. Compared with the holeinduced photocorrosion, the electrochemical oxidation at high anodic potentials resulted in severer performance degradation of Ta3N5. Although the surface oxide layer on deteriorated Ta3N5 photoanodes could be removed by NH3 re-treatment,the PEC performance was only partially recovered. As an alternative, anchoring a dual-layer Co(OH)x/Co OOH co-catalyst shell on the porous Ta3N5 NAs demonstrated substantially enhanced PEC performance and stability. Overall, this work provides reference to controllably fabricate 3D nanoporous Ta3N5-based photoanodes for efficient and stable PEC water splitting via optimizing the light absorption, hole extraction,charge separation and utilization.展开更多
基金supported by the National Natural Science Foundation of China(50771092,21073162)Science and Technology Commission of Shanghai Municipality,China(08JC1421600)Science and Technology Bureau of J iaxing Municipality,China(2008AZ2018)~~
基金Project (SBZDPY-11-17) supported by the Fund on Key Laboratory Project for Hydrodynamic Force, Ministry of Education, China Project (SZD0502-09-0) supported by Key Disciplines of Materials Processing Engineering of Sichuan Province, China
文摘The special experimental device and sulfuric acid electrolyte were adopted to study the influence of anodic oxidation heat on hard anodic film for 2024 aluminum alloy. Compared with the oxidation heat transferred to the electrolyte through anodic film, the heat transferred to the coolant through aluminum substrate is more beneficial to the growth of anodic film. The film forming speed, film thickness, density and hardness are significantly increased as the degree of undercooling of the coolant increases. The degree of undercooling of the coolant, which is necessary for the growth of anodic film, is related to the degree of undercooling of the electrolyte, thickness of aluminum substrate, thickness of anodic film, natural parameters of bubble covering and current density. The microstructure and performance of the oxidation film could be controlled by the temperature of the coolant.
基金Project supported by University New Materials Disciplines Construction Program of Beijing Region
文摘Aluminum capacitor foils with a tunnel etch structure were reacted with boiling water and then anodized at 530 V in boric acid solution or boric acid＋citric acid mixed solution.The microstructure and crystallinity of the resulting anodized film were examined by TEM and XRD.The special capacitance,resistance and withstanding voltage of the film were explored with electrochemical impedance spectroscopy（EIS）,LCR meter and small-current charging.The results show that the high voltage anodized oxide film consists of an inner layer with high crystallinity and an outer layer with low crystallinity.However,the crystallinity of the film formed in boric acid＋citric acid mixed solution is higher than that of the film formed in only boric acid solution,leading to an increase in film＇s field strength and special capacitance.Meanwhile,there are more defects from phase transformation in the out layer of the film formed in boric acid＋citric acid mixed solution than in that of film formed in only boric acid solution,leading to a decrease in film＇s resistance and withstanding voltage.
文摘Consumable carbon anodes are used in the electrowinning of aluminium by the Hall-Heroult process. Emissions of CO2 may be eliminated by introducing an inert oxygen evolving anode, which however will require a higher anode potential. An alternative approach is to use a natural gas or hydrogen gas anode to reduce the CO2 emissions and lower the anode potential. Preliminary laboratory experiments were carried out in an alternative molten salt electrolyte consisting of CaCl2-CaO-NaCl at 680℃ Porous anodes of platinum and tin oxide were tested during electrolysis at constant current. The behaviour of inert anode candidate materials such as tin oxide and nickel ferrite were also studied.
基金Project(2005CB623703) supported by the Major State Basic Research and Development Program of ChinaProject(2008AA030503) supported by Hi-Tech Research and Development Program of China
文摘The CaO-doped Cu/（NiFe2O4-10NiO） cermet inert anodes were prepared by the cold isostatie pressing-sintering process, and their corrosion resistance to Na3AlF6-K3AlF6-Al203 melt was studied. The results show that the relative density of 5Cu/（NiFe2O4-10NiO） cermet sintered at 1 200 ℃ increases from 82.83% to 97.63% when 2% CaO （mass fraction） is added. During the electrolysis, the relative density of cermet inert anode descends owing to the chemical dissolution of additive CaO at ceramic grain boundary, which accelerates the penetration of electrolyte. Thus, the corrosion resistance to melts of Cu/（NiFe2O4-10NiO） cermet inert anode is reduced. To improve the corrosion resistance of the cermet inert anode, the content of CaO doped should be decreased and the technology of cleaning the ceramic grain boundary should be applied.
基金Projects(20476106,50721003 and 20636020) supported by the National Natural Science Foundation of ChinaProject(50825102) supported by the National Natural Science Funds for Distinguished Young Scholar of China+1 种基金Project(2006AA03Z511) supported by the National High Technology Research and Development Program of ChinaProject supported by the 111 Program of Chinese Ministry of Education
文摘A novel Ti-based Ti-Mn composite anode used for electrolytic manganese dioxide(EMD) fabrication was developed by a two-step heating manganizing technique.The effects of sintering temperature on the manganized microstructure and the performance of the composite anode were studied by scanning electron microscopy(SEM),mechanical properties tests at room temperature and electrochemical methods.The results show that the thickness of the diffusion layer increases with the increase of sintering temperature up to 1 100 °C;whereas,the surface Mn content increases and reaches the maximum at 1 000 °C and then decreases thereafter.Lower surface Mn content is beneficial for the enhanced corrosion resistance and lowered open cell voltage in electrolytic process.The new anode prepared under the optimized conditions has been applied in industry and exhibits superior economic benefits to conventional Ti anodic materials.
基金financially supported by the National Natural Science Foundation of China (51774145,51872317 and 21835007)China Postdoctoral Science Foundation (2019M661644)China Scholarship Council (CSC) for financial support。
文摘Solar-driven photoelectrochemical(PEC) water splitting is a promising technology for sustainable hydrogen production, which relies on the development of efficient and stable photoanodes for water oxidation reaction. The thickness and microstructure of semiconductor films are generally crucial to their PEC properties. Herein, three-dimensional(3D) interconnected nanoporous Ta3N5 film photoanodes with controlled thickness were successfully fabricated via galvanostatic anodization and NH3 nitridation. The porous Ta3N5 nanoarchitectures(NAs) of 900 nm in thickness showed the highest PEC performance due to the optimal lightharvesting and charge separation. Compared with the holeinduced photocorrosion, the electrochemical oxidation at high anodic potentials resulted in severer performance degradation of Ta3N5. Although the surface oxide layer on deteriorated Ta3N5 photoanodes could be removed by NH3 re-treatment,the PEC performance was only partially recovered. As an alternative, anchoring a dual-layer Co(OH)x/Co OOH co-catalyst shell on the porous Ta3N5 NAs demonstrated substantially enhanced PEC performance and stability. Overall, this work provides reference to controllably fabricate 3D nanoporous Ta3N5-based photoanodes for efficient and stable PEC water splitting via optimizing the light absorption, hole extraction,charge separation and utilization.
