Based on the fundamental relationship among the circuit power, the circuit delay and the supply voltage, four theorems associated with the application of dynamic voltage scaling （DVS） policies are proposed and prove...Based on the fundamental relationship among the circuit power, the circuit delay and the supply voltage, four theorems associated with the application of dynamic voltage scaling （DVS） policies are proposed and proved. First, the existence characteristics of the optimal supply voltage for a single task are proved, which suggests that the optimal supply voltage for the single task should be selected only within a one-dimensional term, and the corresponding task end time by the optimal supply voltage should be identical with its deadline. Then, it is pointed out that the minimum energy consumption that the DVS policy can obtain when completing a single task is certainly lower than that of the dynamic power management （DPM） policy or the combined DVS＋DPM policy under the same conditions. Finally, the theorem of energy consumption minimization for a multi-task group is proposed, which declares that it is necessary to keep the processor in the execution state during the whole task period to obtain the minimum energy consumption, while satisfying the deadline constraints of any task.展开更多
The improved current-doubler-rectifier zero-voltage-switching PWM full-bridge converter (CDR ZVS PWM FB converter) achieves ZVS for the switches in a wide load range with the use of the energy stored in the output fil...The improved current-doubler-rectifier zero-voltage-switching PWM full-bridge converter (CDR ZVS PWM FB converter) achieves ZVS for the switches in a wide load range with the use of the energy stored in the output filter inductances, and the rectifier diodes commute naturally, therefore no oscillation and voltage spike occurs. The transformer needs no special manufacture method to limit the leakage inductance. The ZVS achievement and the design considerations for the output filter inductances and the blocking capacitor are discussed for the improved CDR ZVS PWM FB converter. A 540 W prototype converter is built in the lab to verify the operational principle and design considerations for the improved converter, the experimental results are also included.展开更多
A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperatur...A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperature characteristic of feedback capacitor on the switching circuit output is analyzed based on the acquisition and measurement system in this paper.The characteristics of different filters are analyzed,and the corresponding filter circuit is configured according to the actual sensor bandwidth.Experiments show that the circuit can effectively filter out noises among the vibration signal and obtain vibration signal accurately.展开更多
For the high resolution required in a digital interface circuit of an accelerometer used in feeble gravity measurement, a switched-capacitor （SC） sigma-delta modulator （SDM） is proposed. Based on the principle and...For the high resolution required in a digital interface circuit of an accelerometer used in feeble gravity measurement, a switched-capacitor （SC） sigma-delta modulator （SDM） is proposed. Based on the principle and the topology structure of the SDMs, the influence of oversampling ratio, bits of an internal quantizer and the cascaded structure on weak signal detecting precision is analyzed, and an ideal low-distortion SDM with a second-order 1-bit structure satisfying the high- resolution interface circuit of an accelerometer is designed. With the research on non-idealities of each SDM block in the SC circuit implementation and their impacts on power consumption, the realized parameters of low-power SDMs based on different bandwidths are devised and the power consumption of each SDM is estimated. Time-domain behavioral simulation is explored based on Simulink. The results demonstrate that a 21- bit resolution of the designed SDMs can be achieved on the premise of low power, and the parameters for the circuit implementation can be directed to the transistor-level circuit design.展开更多
Based on the characteristics of field-programmable gate array(FPGA) such as multi-task,high-speed,parallelity,etc,a filtering algorithm is presented to filter the output signal of laser gyr o with high-speed and high ...Based on the characteristics of field-programmable gate array(FPGA) such as multi-task,high-speed,parallelity,etc,a filtering algorithm is presented to filter the output signal of laser gyr o with high-speed and high accuracy.The filter is composed of basic logic cell s,multipliers an d memory inside FPGA.By using an multiplication decomposition method and design ing reliable time-sequence,the filter is realized,which is easy to be transpl anted and of low cost.Furthermore,all the signal demodulation algorithms of t he laser gyr oscope can be integrated in only one FPGA,which reduces the cost and complexity of the system.展开更多
A Y-band frequency doubler is analyzed and designed with GaAs planar Schottky diode, which is flip-chip solded into a 50 μm thick quartz substrate. Diode embedding impedance is found by full- wave analysis with lumpe...A Y-band frequency doubler is analyzed and designed with GaAs planar Schottky diode, which is flip-chip solded into a 50 μm thick quartz substrate. Diode embedding impedance is found by full- wave analysis with lumped port to model the nonlinear junction for impedance matching without the need of diode equivalent circuit model. All the matching circuit is designed ＂on-chip＂ and the mul- tiplier is self-biasing. To the doubler, a conversion efficiency of 6.1% and output power of 5.4mW are measured at 214GHz with input power of 88mW, and the typical measured efficiency is 4.5% in 200 - 225 GHz.展开更多
Based on an analysis of the misunderstandings and problems concerning wind power development, this paper summarizes the experiences of the coordinated development of wind power and power grids in foreign countries, an...Based on an analysis of the misunderstandings and problems concerning wind power development, this paper summarizes the experiences of the coordinated development of wind power and power grids in foreign countries, and proposes principles and strategies for the coordinated development of wind power and power grids, and related measures and suggestions for large scale development of wind power in China.展开更多
DC regulated power has play a decisive role status in the modem enterprise production and family life. With the development of science and technology, all kinds of computer simulation technology is increasingly rising...DC regulated power has play a decisive role status in the modem enterprise production and family life. With the development of science and technology, all kinds of computer simulation technology is increasingly rising, the paper simulate and compare common DC regulated power with adjustable DC regulated power by Altium Designer software, intuitively demonstrates the stabilizing effect of the circuit, and introduces the characteristics of adjustable DC regulated power. Using AD13 software simulate and design DC stabilized power supply circuit, calculated the main parameters of the circuit, simulated and analyzed the circuit working simulation process and the working state of the circuit, it can visually verify the results of the theoretical analysis, and get relevant conclusions.展开更多
文摘Based on the fundamental relationship among the circuit power, the circuit delay and the supply voltage, four theorems associated with the application of dynamic voltage scaling （DVS） policies are proposed and proved. First, the existence characteristics of the optimal supply voltage for a single task are proved, which suggests that the optimal supply voltage for the single task should be selected only within a one-dimensional term, and the corresponding task end time by the optimal supply voltage should be identical with its deadline. Then, it is pointed out that the minimum energy consumption that the DVS policy can obtain when completing a single task is certainly lower than that of the dynamic power management （DPM） policy or the combined DVS＋DPM policy under the same conditions. Finally, the theorem of energy consumption minimization for a multi-task group is proposed, which declares that it is necessary to keep the processor in the execution state during the whole task period to obtain the minimum energy consumption, while satisfying the deadline constraints of any task.
文摘The improved current-doubler-rectifier zero-voltage-switching PWM full-bridge converter (CDR ZVS PWM FB converter) achieves ZVS for the switches in a wide load range with the use of the energy stored in the output filter inductances, and the rectifier diodes commute naturally, therefore no oscillation and voltage spike occurs. The transformer needs no special manufacture method to limit the leakage inductance. The ZVS achievement and the design considerations for the output filter inductances and the blocking capacitor are discussed for the improved CDR ZVS PWM FB converter. A 540 W prototype converter is built in the lab to verify the operational principle and design considerations for the improved converter, the experimental results are also included.
文摘A piezoelectric sensor charge/voltage conversion circuit is designed based on the principle that piezoelectric sensor can convert the vibration or shock acceleration into the charge proportionally.Effect of temperature characteristic of feedback capacitor on the switching circuit output is analyzed based on the acquisition and measurement system in this paper.The characteristics of different filters are analyzed,and the corresponding filter circuit is configured according to the actual sensor bandwidth.Experiments show that the circuit can effectively filter out noises among the vibration signal and obtain vibration signal accurately.
基金The National High Technology Research and Development Program of China (863 Program) ( No. 2006AA12Z302)
文摘For the high resolution required in a digital interface circuit of an accelerometer used in feeble gravity measurement, a switched-capacitor （SC） sigma-delta modulator （SDM） is proposed. Based on the principle and the topology structure of the SDMs, the influence of oversampling ratio, bits of an internal quantizer and the cascaded structure on weak signal detecting precision is analyzed, and an ideal low-distortion SDM with a second-order 1-bit structure satisfying the high- resolution interface circuit of an accelerometer is designed. With the research on non-idealities of each SDM block in the SC circuit implementation and their impacts on power consumption, the realized parameters of low-power SDMs based on different bandwidths are devised and the power consumption of each SDM is estimated. Time-domain behavioral simulation is explored based on Simulink. The results demonstrate that a 21- bit resolution of the designed SDMs can be achieved on the premise of low power, and the parameters for the circuit implementation can be directed to the transistor-level circuit design.
文摘Based on the characteristics of field-programmable gate array(FPGA) such as multi-task,high-speed,parallelity,etc,a filtering algorithm is presented to filter the output signal of laser gyr o with high-speed and high accuracy.The filter is composed of basic logic cell s,multipliers an d memory inside FPGA.By using an multiplication decomposition method and design ing reliable time-sequence,the filter is realized,which is easy to be transpl anted and of low cost.Furthermore,all the signal demodulation algorithms of t he laser gyr oscope can be integrated in only one FPGA,which reduces the cost and complexity of the system.
基金Supported by the 12th Five-year Defense Pre-research Fund of China(No.51308030509)
文摘A Y-band frequency doubler is analyzed and designed with GaAs planar Schottky diode, which is flip-chip solded into a 50 μm thick quartz substrate. Diode embedding impedance is found by full- wave analysis with lumped port to model the nonlinear junction for impedance matching without the need of diode equivalent circuit model. All the matching circuit is designed ＂on-chip＂ and the mul- tiplier is self-biasing. To the doubler, a conversion efficiency of 6.1% and output power of 5.4mW are measured at 214GHz with input power of 88mW, and the typical measured efficiency is 4.5% in 200 - 225 GHz.
文摘Based on an analysis of the misunderstandings and problems concerning wind power development, this paper summarizes the experiences of the coordinated development of wind power and power grids in foreign countries, and proposes principles and strategies for the coordinated development of wind power and power grids, and related measures and suggestions for large scale development of wind power in China.
文摘DC regulated power has play a decisive role status in the modem enterprise production and family life. With the development of science and technology, all kinds of computer simulation technology is increasingly rising, the paper simulate and compare common DC regulated power with adjustable DC regulated power by Altium Designer software, intuitively demonstrates the stabilizing effect of the circuit, and introduces the characteristics of adjustable DC regulated power. Using AD13 software simulate and design DC stabilized power supply circuit, calculated the main parameters of the circuit, simulated and analyzed the circuit working simulation process and the working state of the circuit, it can visually verify the results of the theoretical analysis, and get relevant conclusions.
