本软件系统是适用于第一款国产可编程逻辑器件FDP100K(FDP:FPGA for Data-Path)的实用软件开发系统.该软件系统中的各模块针对FDP100K硬件结构提出新的实现算法,尤其是后端的工艺映射和布局布线两个模块.经过完整软硬件协同测试表明:该...本软件系统是适用于第一款国产可编程逻辑器件FDP100K(FDP:FPGA for Data-Path)的实用软件开发系统.该软件系统中的各模块针对FDP100K硬件结构提出新的实现算法,尤其是后端的工艺映射和布局布线两个模块.经过完整软硬件协同测试表明:该软件系统各模块功能正确,与总控模块接口正确,与硬件对应接口正确,能高效正确地实现数据通路领域电路和其他类型电路的功能.展开更多
To meet the demands for different supply voltage levels on SOC required by digital modules like CPU core and analog modules,a novel dual-output charge pump is proposed. The charge pump can output a step-up and a step-...To meet the demands for different supply voltage levels on SOC required by digital modules like CPU core and analog modules,a novel dual-output charge pump is proposed. The charge pump can output a step-up and a step-down voltage simultaneously with a high driving capability. The multiple gain pair technique was introduced to enhance its efficiency. The proposed co-use technology for capacitors and switch arrays reduced its cost. The charge pump was designed and fabricated in a TSMC 0.35μm mixed-signal CMOS process. A group of analytical equations were derived to model its static characteristics. A state-space model was derived to describe its small-signal dynamic behavior. Analytical predictions were verified by Spectre simulation and testing. The consistency of simulated results as well as test results with analytical predictions demonstrated the high precision of the derived analytical equations and the developed models.展开更多
A monolithic voltage controlled oscillator （VCO） based on negative resistance principle is presented uti-lizing commercially available InGaP/GaAs hetero-junction bipolar transistor （HBT） technology. This VCO is de...A monolithic voltage controlled oscillator （VCO） based on negative resistance principle is presented uti-lizing commercially available InGaP/GaAs hetero-junction bipolar transistor （HBT） technology. This VCO is de-signed for 5GHz-band wireless applications. Except for bypass and decoupled capacitors,no external component is needed for real application. Its measured output frequency range is from 4.17 to 4.56GHz,which is very close to the simulation one. And the phase noise at an offset frequency of 1MHz is -112dBc/Hz. The VCO core dissipates 15.5mW from a 3.3V supply,and the output power ranges from 0 to 2dBm. To compare with other oscillators,the figure of merit is calculated,which is about -173.2dBc/Hz. Meanwhile, the principle and design method of nega-tive resistance oscillator are also discussed.展开更多
Two types of handshaking circuits are proposed to implement the asynchronous communication between two processing elements in the wavefront array processors. After correcting the flaws in the original design, these ci...Two types of handshaking circuits are proposed to implement the asynchronous communication between two processing elements in the wavefront array processors. After correcting the flaws in the original design, these circuits make the system more robust and flexible. These circuits have compact architectures and are of higher performance. Besides, compared with other handshaking circuits, these designs are more suitable for FPGA.展开更多
Novel accurate and efficient equivalent circuit trained artificial neural-network （EC-ANN） models,which inherit and improve upon EC model and EM-ANN models＇ advantages,are developed for coplanar waveguide （CPW） d...Novel accurate and efficient equivalent circuit trained artificial neural-network （EC-ANN） models,which inherit and improve upon EC model and EM-ANN models＇ advantages,are developed for coplanar waveguide （CPW） discontinuities. Modeled discontinuities include ： CPW step, interdigital capacitor, symmetric cross junction, and spiral inductor, for which validation tests are performed. These models allow for circuit design, simulation, and optimization within a CAD simulator. Design and realization of a coplanar lumped element band pass filter on GaAs using the developed CPW EC-ANN models are demonstrated.展开更多
Aiming at the application of a wireless sensor network to locating miners in underground mine,we design a wireless sensor network location node system,considering the communication performance and the intrinsic safety...Aiming at the application of a wireless sensor network to locating miners in underground mine,we design a wireless sensor network location node system,considering the communication performance and the intrinsic safety. The location node system consists of a mobile node,several fixed nodes,and a sink node,all of whose circuits were designed based on CC2430. A varistor and a RC circuit were used in the reset circuit of a sensor node to guarantee the intrinsic safety by reducing discharge energy,the theoretical analysis of the discharge energy shows that the reset circuit is an intrinsic safety one. The analysis and simulation about the performance of the location node system are discussed,such as network communication delay and packet loss rate,the results show that the highest network communication delay of the system is about 0.11 seconds,and the highest packet loss rate is about 0.13,which assures the location node system has a high reliability,and can locate miners in the underground mine.展开更多
A low-power and high-speed 16:1 MUX IC designed for Optical fiber communication based on TSMC 0.25 μm CMOS technology is represented. A tree-type architecture was utilized. The output data bit rate is 2.5 Gb/s at inp...A low-power and high-speed 16:1 MUX IC designed for Optical fiber communication based on TSMC 0.25 μm CMOS technology is represented. A tree-type architecture was utilized. The output data bit rate is 2.5 Gb/s at input clock rate of 1.25 GHz. The simulation results show that the output signal has peak-to-peak amplitude of 400 mV, the power dissipation is less than 200 mW and the power dissipation of core circuit is less than 20 mW at the 2.5 Gb/s standard bit rate and supply voltage of 2.5 V. The chip area is （1.8） mm2.展开更多
Many modulated communication signals exhibit a cyclostationarity （or periodic correlation） property. To exploit the underlying periodicity of the modulated signal in the real-time recognition schcme of radio eilviro...Many modulated communication signals exhibit a cyclostationarity （or periodic correlation） property. To exploit the underlying periodicity of the modulated signal in the real-time recognition schcme of radio eilvironments, this letter introduces a spectral correlation method to identify the number and the direction of multi-path in the environment of frequency-selective fading channel. By simulation, the graphs of spatial spectra corresponding to a certain cycle frequency is presented to show the accuracy of spectral correlation method in multi-path environment recognition.展开更多
To study the influencing factors of traffic violations,this study investigated the effects of vehicle attribution,day of week,time of day,location of traffic violations,and weather on traffic violations based on the e...To study the influencing factors of traffic violations,this study investigated the effects of vehicle attribution,day of week,time of day,location of traffic violations,and weather on traffic violations based on the electronic enforcement data and historical weather data obtained in Shangyu,China.Ten categories of traffic violations were determined from the raw data.Then,chi-square tests were used to analyze the relationship between traffic violations and the potential risk factors.Multinomial logistic regression analyses were conducted to further estimate the effects of different risk factors on the likelihood of the occurrence of traffic violations.By analyzing the results of chi-square tests via SPSS,the five factors above were all determined as significant factors associated with traffic violations.The results of the multinomial logistic regression revealed the significant effects of the five factors on the likelihood of the occurrence of corresponding traffic violations.The conclusions are of great significance for the development of effective traffic intervention measures to reduce traffic violations and the improvement of road traffic safety.展开更多
A monolithic clock-recovery circuit used in 622 Mb/s optical communication system is designed,which is based on the phase-locked loop theory,and uses bipolar transistor model.It overcomes the shortcoming of clock reco...A monolithic clock-recovery circuit used in 622 Mb/s optical communication system is designed,which is based on the phase-locked loop theory,and uses bipolar transistor model.It overcomes the shortcoming of clock recovery method based on filter,and implements monolithic clock-recovery IC.The designed circuits include phase detector,voltage-controlled oscillator and loop filter.Among them,the voltage-control oscillator is a modified two-stage ring oscillator,which provides quadrature clock signals and presents wide voltage-controlled range and high voltage-controlling sensitivity.展开更多
Power line communication technology is used in various applications, from high voltage network to the low voltage network, as it is the only wired communication technology that is comparable with wireless communicatio...Power line communication technology is used in various applications, from high voltage network to the low voltage network, as it is the only wired communication technology that is comparable with wireless communication network. It works by injecting a modulated carrier wave into the electric cables from one transceiver to another. But still, the noise level and impedance mismatch are still the main concern of this technology, particularly in the low voltage network in residential area. Power line has additive non-white noise and extremely harsh environment for communication. At the same time, there is signal attenuation along the power line caused by the impedance mismatch in the power line network. Even though these problems can be controlled using a band-pass filter and an impedance matching circuit respectively, but the impedances in the power line are time and location variant and it is rather difficult to design a circuit that allows maximum power transfer in the system all the time. Thus in this paper, a new adaptive impedance matching circuits is proposed for narrowband power line communication. This methodology is derived based on the RLC band-pass filter circuit. This concept is designed to achieve simpler configuration and higher matching resolution.展开更多
The protection of distribution networks is facing new challenges from an increasing amount of DG （distributed generation）. Even though current technology provides satisfactory solutions to manage this new situation,...The protection of distribution networks is facing new challenges from an increasing amount of DG （distributed generation）. Even though current technology provides satisfactory solutions to manage this new situation, LOM （loss-of-mains protection） is still considered problematic. The solution proposed in this paper focuses on the use of a line differential protection relay. It inherently contains a suitable communication channel and provides absolutely selective protection for the feeder. Furthermore, it prevents the feeder relays from false tripping for faults on the neighboring feeder. The present trend in protection communication points towards the use of fiber optics. For line differential protection, this means a fast and high-capacity communication link which enables the implementation of many advanced protection functions. In addition, a solid foundation for such a communication link is offered by the new IEC 61850 standard and Ethernet technologies. The basic functionality of the line differential protection enables the operation of both the feeder protection and the DG protection for any fault on the feeder. Furthermore, basic LOM protection methods can be applied as backup protection for failures on the communication link.展开更多
文摘本软件系统是适用于第一款国产可编程逻辑器件FDP100K(FDP:FPGA for Data-Path)的实用软件开发系统.该软件系统中的各模块针对FDP100K硬件结构提出新的实现算法,尤其是后端的工艺映射和布局布线两个模块.经过完整软硬件协同测试表明:该软件系统各模块功能正确,与总控模块接口正确,与硬件对应接口正确,能高效正确地实现数据通路领域电路和其他类型电路的功能.
文摘To meet the demands for different supply voltage levels on SOC required by digital modules like CPU core and analog modules,a novel dual-output charge pump is proposed. The charge pump can output a step-up and a step-down voltage simultaneously with a high driving capability. The multiple gain pair technique was introduced to enhance its efficiency. The proposed co-use technology for capacitors and switch arrays reduced its cost. The charge pump was designed and fabricated in a TSMC 0.35μm mixed-signal CMOS process. A group of analytical equations were derived to model its static characteristics. A state-space model was derived to describe its small-signal dynamic behavior. Analytical predictions were verified by Spectre simulation and testing. The consistency of simulated results as well as test results with analytical predictions demonstrated the high precision of the derived analytical equations and the developed models.
文摘A monolithic voltage controlled oscillator （VCO） based on negative resistance principle is presented uti-lizing commercially available InGaP/GaAs hetero-junction bipolar transistor （HBT） technology. This VCO is de-signed for 5GHz-band wireless applications. Except for bypass and decoupled capacitors,no external component is needed for real application. Its measured output frequency range is from 4.17 to 4.56GHz,which is very close to the simulation one. And the phase noise at an offset frequency of 1MHz is -112dBc/Hz. The VCO core dissipates 15.5mW from a 3.3V supply,and the output power ranges from 0 to 2dBm. To compare with other oscillators,the figure of merit is calculated,which is about -173.2dBc/Hz. Meanwhile, the principle and design method of nega-tive resistance oscillator are also discussed.
文摘Two types of handshaking circuits are proposed to implement the asynchronous communication between two processing elements in the wavefront array processors. After correcting the flaws in the original design, these circuits make the system more robust and flexible. These circuits have compact architectures and are of higher performance. Besides, compared with other handshaking circuits, these designs are more suitable for FPGA.
文摘Novel accurate and efficient equivalent circuit trained artificial neural-network （EC-ANN） models,which inherit and improve upon EC model and EM-ANN models＇ advantages,are developed for coplanar waveguide （CPW） discontinuities. Modeled discontinuities include ： CPW step, interdigital capacitor, symmetric cross junction, and spiral inductor, for which validation tests are performed. These models allow for circuit design, simulation, and optimization within a CAD simulator. Design and realization of a coplanar lumped element band pass filter on GaAs using the developed CPW EC-ANN models are demonstrated.
基金Projects 20070411065 supported by the China Postdoctoral Science Foundation0801028B by the Jiangsu Postdoctoral Science Research Foundation
文摘Aiming at the application of a wireless sensor network to locating miners in underground mine,we design a wireless sensor network location node system,considering the communication performance and the intrinsic safety. The location node system consists of a mobile node,several fixed nodes,and a sink node,all of whose circuits were designed based on CC2430. A varistor and a RC circuit were used in the reset circuit of a sensor node to guarantee the intrinsic safety by reducing discharge energy,the theoretical analysis of the discharge energy shows that the reset circuit is an intrinsic safety one. The analysis and simulation about the performance of the location node system are discussed,such as network communication delay and packet loss rate,the results show that the highest network communication delay of the system is about 0.11 seconds,and the highest packet loss rate is about 0.13,which assures the location node system has a high reliability,and can locate miners in the underground mine.
文摘A low-power and high-speed 16:1 MUX IC designed for Optical fiber communication based on TSMC 0.25 μm CMOS technology is represented. A tree-type architecture was utilized. The output data bit rate is 2.5 Gb/s at input clock rate of 1.25 GHz. The simulation results show that the output signal has peak-to-peak amplitude of 400 mV, the power dissipation is less than 200 mW and the power dissipation of core circuit is less than 20 mW at the 2.5 Gb/s standard bit rate and supply voltage of 2.5 V. The chip area is （1.8） mm2.
文摘Many modulated communication signals exhibit a cyclostationarity （or periodic correlation） property. To exploit the underlying periodicity of the modulated signal in the real-time recognition schcme of radio eilvironments, this letter introduces a spectral correlation method to identify the number and the direction of multi-path in the environment of frequency-selective fading channel. By simulation, the graphs of spatial spectra corresponding to a certain cycle frequency is presented to show the accuracy of spectral correlation method in multi-path environment recognition.
基金The National Key Research and Development Program of China(No.2019YFB1600200).
文摘To study the influencing factors of traffic violations,this study investigated the effects of vehicle attribution,day of week,time of day,location of traffic violations,and weather on traffic violations based on the electronic enforcement data and historical weather data obtained in Shangyu,China.Ten categories of traffic violations were determined from the raw data.Then,chi-square tests were used to analyze the relationship between traffic violations and the potential risk factors.Multinomial logistic regression analyses were conducted to further estimate the effects of different risk factors on the likelihood of the occurrence of traffic violations.By analyzing the results of chi-square tests via SPSS,the five factors above were all determined as significant factors associated with traffic violations.The results of the multinomial logistic regression revealed the significant effects of the five factors on the likelihood of the occurrence of corresponding traffic violations.The conclusions are of great significance for the development of effective traffic intervention measures to reduce traffic violations and the improvement of road traffic safety.
文摘A monolithic clock-recovery circuit used in 622 Mb/s optical communication system is designed,which is based on the phase-locked loop theory,and uses bipolar transistor model.It overcomes the shortcoming of clock recovery method based on filter,and implements monolithic clock-recovery IC.The designed circuits include phase detector,voltage-controlled oscillator and loop filter.Among them,the voltage-control oscillator is a modified two-stage ring oscillator,which provides quadrature clock signals and presents wide voltage-controlled range and high voltage-controlling sensitivity.
文摘Power line communication technology is used in various applications, from high voltage network to the low voltage network, as it is the only wired communication technology that is comparable with wireless communication network. It works by injecting a modulated carrier wave into the electric cables from one transceiver to another. But still, the noise level and impedance mismatch are still the main concern of this technology, particularly in the low voltage network in residential area. Power line has additive non-white noise and extremely harsh environment for communication. At the same time, there is signal attenuation along the power line caused by the impedance mismatch in the power line network. Even though these problems can be controlled using a band-pass filter and an impedance matching circuit respectively, but the impedances in the power line are time and location variant and it is rather difficult to design a circuit that allows maximum power transfer in the system all the time. Thus in this paper, a new adaptive impedance matching circuits is proposed for narrowband power line communication. This methodology is derived based on the RLC band-pass filter circuit. This concept is designed to achieve simpler configuration and higher matching resolution.
文摘The protection of distribution networks is facing new challenges from an increasing amount of DG （distributed generation）. Even though current technology provides satisfactory solutions to manage this new situation, LOM （loss-of-mains protection） is still considered problematic. The solution proposed in this paper focuses on the use of a line differential protection relay. It inherently contains a suitable communication channel and provides absolutely selective protection for the feeder. Furthermore, it prevents the feeder relays from false tripping for faults on the neighboring feeder. The present trend in protection communication points towards the use of fiber optics. For line differential protection, this means a fast and high-capacity communication link which enables the implementation of many advanced protection functions. In addition, a solid foundation for such a communication link is offered by the new IEC 61850 standard and Ethernet technologies. The basic functionality of the line differential protection enables the operation of both the feeder protection and the DG protection for any fault on the feeder. Furthermore, basic LOM protection methods can be applied as backup protection for failures on the communication link.
