Based on the surface-gate and buried-gate structures,a novel buried-gate structure called the planar type buried-gate (PTBG) structure for static induction devices (SIDs) is proposed.An approach to realize a buried-ga...Based on the surface-gate and buried-gate structures,a novel buried-gate structure called the planar type buried-gate (PTBG) structure for static induction devices (SIDs) is proposed.An approach to realize a buried-gate type static induction transistor by conventional planar process technology is presented.Using this structure,it is successfully avoided the second epitaxy with a high degree of difficulty and the complicated mesa process in conventional buried gate.The experimental results demonstrate that this structure is desirable for application in power SIDs.Its advantages are high breakdown voltage and blocking gain.展开更多
The electrochemical synthesis silicon wires by electrorefining metallurgical grade silicon in thermally dried and pre-electrolyzed molten KF-NaF eutectic were studied at temperatures 800-900 ℃ using cyclic voltammetr...The electrochemical synthesis silicon wires by electrorefining metallurgical grade silicon in thermally dried and pre-electrolyzed molten KF-NaF eutectic were studied at temperatures 800-900 ℃ using cyclic voltammetry and ac impedance. One oxidation peak at -0.14 V could be attributed to the reaction of Si to Si4＋. A cathodic peak occurred at -0.56 V in the cyclic voltammogram and one response semicircle in the ac impedance spectrum was observed, supporting a one-step electrochemical reduction process of Si4＋-→Si. The electrochemical reaction of silicon was controlled by the diffusion process. The purity of electrorefined silicon wires was up to 99.999% by ICP-MS analysis.展开更多
The effects of a novel three-step aging process （T76＋T6） on the electrochemical corrosion behavior of 7150 extruded aluminum alloy were evaluated and compared with those of the conventional retrogression and re-agi...The effects of a novel three-step aging process （T76＋T6） on the electrochemical corrosion behavior of 7150 extruded aluminum alloy were evaluated and compared with those of the conventional retrogression and re-aging process （T77）. The open circuit potential （OCP）, cyclic polarization and electrochemical impedance spectra （EIS） of the A1 alloys were measured after treatment in three solutions （3.5% NaCl （mass fraction）; 10 mmol/L NaCl ＋ 0.1 mol/L Na2SO4; 4 mol/L NaCl ＋ 0.5 mol/L KNO3 ＋ 0.1 mol/L HNO3）. The parameters including the corrosion potential, pitting potential, pit transition potential and steepness, and potential differences were extensively discussed to evaluate the corrosion behavior of the Al alloys. The electrochemical and scanning electron microscopy （SEM） data show that compared with the 7150-T77 Al alloy, the T76 ＋ T6 aged 7150 A1 alloy exhibits better resistance to pitting corrosion, inter-granular corrosion （IGC） and exfoliation corrosion, which is attributed to further coarsening and inter-spacing of the grain boundary particles （GBPs） as revealed by transmission electron microscopy. Furthermore, the hardness tests indicate that an attractive combination of strength and corrosion resistance was obtained for the 7150 Al alloy with T76 ＋ T6 treatment.展开更多
To evaluate the geotechnical properties of coarse-grained soil affected by cyclic freeze-thaw,the electrical resistivity and mechanical tests are conducted.The soil specimens are prepared under different water content...To evaluate the geotechnical properties of coarse-grained soil affected by cyclic freeze-thaw,the electrical resistivity and mechanical tests are conducted.The soil specimens are prepared under different water contents,dry densities and exposed to 0?20 freeze-thaw cycles.As a result,the stress?strain behavior of the specimen(w=14.0%andρd=1.90 g/cm^3)changes from strain-hardening into strain-softening due to the freeze-thaw effect.The electrical resistivity of test specimen increases with the freeze-thaw cycles change,but the mechanical parameters(the unconfined compressive strength qu and the deformation modulus E)and brittleness index decrease considerably at the same conditions.All of them tend to be stable after 7?9 cycles.Moreover,both the dry density and the water content have reciprocal effects on the freeze-thaw actions.The failure and pore characteristics of specimens affected by freeze-thaw cycles are discussed by using the image analysis method.Then,an exponential function equation is developed to assess the electrical resistivity of specimens affected by the cyclic freeze-thaw.Linear relations between the mechanical parameters and the electrical resistivity of specimens are established to evaluate the geotechnical properties of the soil exposed to freeze-thaw actions through the corresponding electrical resistivity.展开更多
Ni–MgO nano‐composites were prepared on carbon anodes by electrodeposition from a nickel Watts bath in the presence of fine MgO reinforcement particles. Their performance as electrocata‐lysts for the oxidation of m...Ni–MgO nano‐composites were prepared on carbon anodes by electrodeposition from a nickel Watts bath in the presence of fine MgO reinforcement particles. Their performance as electrocata‐lysts for the oxidation of methanol and ethanol in alkaline medium was investigated and compared with that of carbon coated pure Ni （Ni/C）. The chemical composition, phase structure, and surface morphology of the deposited nano‐composites were studied by energy dispersive X‐ray spectros‐copy, X‐ray diffractometry, and scanning electron microscopy, respectively. Different electrochemi‐cal techniques were used to estimate the catalytic activity of the prepared electrocatalyst anodes, including cyclic voltammetry （CV）, chronoamperometry, and electrochemical impedance spectros‐copy （EIS）. The Ni/C electrocatalyst alone exhibited remarkably low catalytic activity and poor stability toward the electrooxidation process. The inclusion of MgO significantly promoted the cata‐lytic activity of the Ni catalyst for the alcohol electrooxidation and enhanced its poisoning re‐sistance. The EIS results confirmed those of CV and revealed a lower charge transfer resistance and enhanced roughness for the Ni–MgO/C nano‐composite electrodes compared with those of Ni/C.展开更多
文摘Based on the surface-gate and buried-gate structures,a novel buried-gate structure called the planar type buried-gate (PTBG) structure for static induction devices (SIDs) is proposed.An approach to realize a buried-gate type static induction transistor by conventional planar process technology is presented.Using this structure,it is successfully avoided the second epitaxy with a high degree of difficulty and the complicated mesa process in conventional buried gate.The experimental results demonstrate that this structure is desirable for application in power SIDs.Its advantages are high breakdown voltage and blocking gain.
文摘The electrochemical synthesis silicon wires by electrorefining metallurgical grade silicon in thermally dried and pre-electrolyzed molten KF-NaF eutectic were studied at temperatures 800-900 ℃ using cyclic voltammetry and ac impedance. One oxidation peak at -0.14 V could be attributed to the reaction of Si to Si4＋. A cathodic peak occurred at -0.56 V in the cyclic voltammogram and one response semicircle in the ac impedance spectrum was observed, supporting a one-step electrochemical reduction process of Si4＋-→Si. The electrochemical reaction of silicon was controlled by the diffusion process. The purity of electrorefined silicon wires was up to 99.999% by ICP-MS analysis.
基金Projects(51134007,51201186)supported by the National Natural Science Foundation of ChinaProject(51327902)supported by the Major Research Equipment Development,China+1 种基金Projects(2012CB619502,2010CB731701)supported by the National Basic Research Program of ChinaProject(12JJ6040)supported by the Natural Science Foundation of Hunan Province,China
文摘The effects of a novel three-step aging process （T76＋T6） on the electrochemical corrosion behavior of 7150 extruded aluminum alloy were evaluated and compared with those of the conventional retrogression and re-aging process （T77）. The open circuit potential （OCP）, cyclic polarization and electrochemical impedance spectra （EIS） of the A1 alloys were measured after treatment in three solutions （3.5% NaCl （mass fraction）; 10 mmol/L NaCl ＋ 0.1 mol/L Na2SO4; 4 mol/L NaCl ＋ 0.5 mol/L KNO3 ＋ 0.1 mol/L HNO3）. The parameters including the corrosion potential, pitting potential, pit transition potential and steepness, and potential differences were extensively discussed to evaluate the corrosion behavior of the Al alloys. The electrochemical and scanning electron microscopy （SEM） data show that compared with the 7150-T77 Al alloy, the T76 ＋ T6 aged 7150 A1 alloy exhibits better resistance to pitting corrosion, inter-granular corrosion （IGC） and exfoliation corrosion, which is attributed to further coarsening and inter-spacing of the grain boundary particles （GBPs） as revealed by transmission electron microscopy. Furthermore, the hardness tests indicate that an attractive combination of strength and corrosion resistance was obtained for the 7150 Al alloy with T76 ＋ T6 treatment.
基金Project(2016ZGHJ/XZHTL-YQSC-26)supported by the Key Scientific Research Project of China Gold GroupProject(SQ2019QZKK2806)supported by the Second Tibetan Plateau Scientific Expedition and Research(STEP)Program,China+1 种基金Project(300102268716)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(LHKA-G201701)supported by the Science and Technology Project of Yalong River Hydropower Development Company,China。
文摘To evaluate the geotechnical properties of coarse-grained soil affected by cyclic freeze-thaw,the electrical resistivity and mechanical tests are conducted.The soil specimens are prepared under different water contents,dry densities and exposed to 0?20 freeze-thaw cycles.As a result,the stress?strain behavior of the specimen(w=14.0%andρd=1.90 g/cm^3)changes from strain-hardening into strain-softening due to the freeze-thaw effect.The electrical resistivity of test specimen increases with the freeze-thaw cycles change,but the mechanical parameters(the unconfined compressive strength qu and the deformation modulus E)and brittleness index decrease considerably at the same conditions.All of them tend to be stable after 7?9 cycles.Moreover,both the dry density and the water content have reciprocal effects on the freeze-thaw actions.The failure and pore characteristics of specimens affected by freeze-thaw cycles are discussed by using the image analysis method.Then,an exponential function equation is developed to assess the electrical resistivity of specimens affected by the cyclic freeze-thaw.Linear relations between the mechanical parameters and the electrical resistivity of specimens are established to evaluate the geotechnical properties of the soil exposed to freeze-thaw actions through the corresponding electrical resistivity.
文摘Ni–MgO nano‐composites were prepared on carbon anodes by electrodeposition from a nickel Watts bath in the presence of fine MgO reinforcement particles. Their performance as electrocata‐lysts for the oxidation of methanol and ethanol in alkaline medium was investigated and compared with that of carbon coated pure Ni （Ni/C）. The chemical composition, phase structure, and surface morphology of the deposited nano‐composites were studied by energy dispersive X‐ray spectros‐copy, X‐ray diffractometry, and scanning electron microscopy, respectively. Different electrochemi‐cal techniques were used to estimate the catalytic activity of the prepared electrocatalyst anodes, including cyclic voltammetry （CV）, chronoamperometry, and electrochemical impedance spectros‐copy （EIS）. The Ni/C electrocatalyst alone exhibited remarkably low catalytic activity and poor stability toward the electrooxidation process. The inclusion of MgO significantly promoted the cata‐lytic activity of the Ni catalyst for the alcohol electrooxidation and enhanced its poisoning re‐sistance. The EIS results confirmed those of CV and revealed a lower charge transfer resistance and enhanced roughness for the Ni–MgO/C nano‐composite electrodes compared with those of Ni/C.
