期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
各种节流装置界限雷诺数图
1
作者 李亚魁 《炼油化工自动化》 1990年第3期47-48,共2页
作者根据各个不同时期的文献,将各种节流装置的界限雷诺数绘制在同一张图中,使得在同一张图中即可查到许多节流装置的界限雷诺数,亦可根据被测介质的性质和测量环境选择较理想的节流装置,用于生产过程的测量控制,方便了设计和计算。
关键词 节流装置 界限雷诺数
下载PDF
阀门流量系数的测量原理与方法研究 被引量:1
2
作者 宋延勇 苏明旭 王子安 《自动化仪表》 CAS 2022年第10期28-32,38,共6页
国内相关标准对阀门流量系数基本概念、测量原理与方法等缺少全面的描述或表述不统一,导致工程技术人员在应用中不易理解和正确使用。目前,流量系数通常在实验室条件下采用不可压缩流体(水)进行测量。研究了流量系数的测量原理和方法。... 国内相关标准对阀门流量系数基本概念、测量原理与方法等缺少全面的描述或表述不统一,导致工程技术人员在应用中不易理解和正确使用。目前,流量系数通常在实验室条件下采用不可压缩流体(水)进行测量。研究了流量系数的测量原理和方法。分析了不同阀门流动状态判定与雷诺数的计算方法差异。基于影响流量系数修正的雷诺数系数与阀门雷诺数的关系,提出典型阀门界限雷诺数值。进一步分析了不同阀门雷诺数与压差要求对测量结果的影响,对流通能力特别大或特别小的阀门,提出了在保证测试流量点的阀门雷诺数大于界限雷诺数的条件下,可根据测试装置性能调整差压要求。该研究可为阀门研发、测试和使用中正确运用阀门流量系数提供参考。 展开更多
关键词 阀门 流量系数 流通能力 阀门雷诺数 界限雷诺数 雷诺数系数
下载PDF
桥电锅炉冷炉试验
3
作者 罗峻 《青海电力》 1995年第2期33-34,共2页
桥电锅炉冷炉试验青海省电力试验研究所罗峻1概述冷炉试验即锅炉冷态空气动力场试验,就是在模型或真型炉膛内以冷态气流模拟热态气流,测量炉膛中的气流分布。煤粉炉运行的可靠性和经济性,在很大程度上取决于燃烧器及炉膛内的空气动... 桥电锅炉冷炉试验青海省电力试验研究所罗峻1概述冷炉试验即锅炉冷态空气动力场试验,就是在模型或真型炉膛内以冷态气流模拟热态气流,测量炉膛中的气流分布。煤粉炉运行的可靠性和经济性,在很大程度上取决于燃烧器及炉膛内的空气动力工况,因此,近两年来,桥头发电厂... 展开更多
关键词 电锅炉 二次风 冷炉试验 燃烧器 界限雷诺数 空气动力场试验 锅炉燃烧 风速 空气温度 烟花示踪
下载PDF
Numerical computations of the flow in a finite diverging channel
4
作者 Zhao-sheng YU Xue-ming SHAO Jian-zhong LIN 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2010年第1期50-60,共11页
The flow in a finite diverging channel opening into a large space and resembling the experimental prototype of Putkaradze and Vorobieff (2006) was numerically investigated. The effects of the Reynolds number,initial c... The flow in a finite diverging channel opening into a large space and resembling the experimental prototype of Putkaradze and Vorobieff (2006) was numerically investigated. The effects of the Reynolds number,initial condition,intersection angle,length of the wedge edges,and the outer boundary condition were examined. The numerical results showed that the flow in the wedge undergoes a change from symmetrical flow to unsymmetrical flow with a weak backflow,then a vortical (circulation) flow and finally an unsteady jet flow as the Reynolds number is increased for an intersection angle of 32° and a wedge edge of length 30 times the width of the inlet slit. For the unsteady flow,the jet attached to one side of the wedge constantly loses stability and rolls up into a mushroom-shaped vortex-pair near the outlet of the wedge. As the intersection angle is increased to 50°,a stable jet flow is observed as a new regime between the vortex and unsteady regimes. Both the intersection angle and the wedge length have negative effects on the stability of the flow,although the effect of the wedge length on the critical Reynolds number for the symmetry-breaking instability is not pronounced. The outer boundary condition was found not to affect the flow patterns inside the wedge significantly. At a certain Re regime above the onset of symmetry-breaking instability,the flows evolve into steady state very slowly except for the initial stage in the case of decreasing flow flux. Two different solutions can be observed within the normal observation time for the experiment,providing a possible explanation for the hysteresis phenomenon in the experiment. 展开更多
关键词 Diverging channel Flow structures BIFURCATION Fictitious domain
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部