Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning el...Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning electron microscopy. The fracture behavior, infiltration and oxidation mechanism were further discussed. The results indicated that NiAl alloy exhibited good wettability on the C/C preform because a TiC reaction layer formed at the interface. Multi-layer（PyC/TiC/NiAl＋TiC） coating evenly and compactly distributed on the surface of the carbon fiber in tubular form. The penetration depth of molten NiAl alloys depended on the reaction between the PyC and titanium. The impact fracture was inclined to along the interface between the NiAl permeability layer and C/C matrix. Al_2TiO_5 and TiO_2 formed on the surface, while the interior multi-layer tubular structure partially remained after oxidation at 1773 K for 30 min.展开更多
The interfacial interaction existing in the Ni ZrO 2 composite plating has been investigated. The experimental results show that no new phases were formed in the interfacial regions between matrix Ni and ZrO 2 part...The interfacial interaction existing in the Ni ZrO 2 composite plating has been investigated. The experimental results show that no new phases were formed in the interfacial regions between matrix Ni and ZrO 2 particles, but an orbital interaction through the mutual overlap of the d orbits does exist in the interfacial regions between Ni atoms and Zr 3+ ions.展开更多
Based on the building of a theoretical model for the large eddy structure, the nonlinear effect of the local rough wall on the large eddy structure in the boundary layer is studied by direct numerical simulation. Nume...Based on the building of a theoretical model for the large eddy structure, the nonlinear effect of the local rough wall on the large eddy structure in the boundary layer is studied by direct numerical simulation. Numerical results show that factors of the local rough feature, the distributing structure and the intensity, etc. play an important role in the evolution of the large eddy structure in the boundary layer.展开更多
Sum frequency generation vibrational spectroscopy(SFG-VS)is a powerful technique for determining molecular structures at both buried interface and air surface.Distinguishing the contribution of SFG signals from buried...Sum frequency generation vibrational spectroscopy(SFG-VS)is a powerful technique for determining molecular structures at both buried interface and air surface.Distinguishing the contribution of SFG signals from buried interface and air surface is crucial to the applications in devices such as microelectronics and bio-tips.Here we demonstrate that the SFG spectra from buried interface and air surface can be differentiated by controlling the film thickness and employment of surface-plasmon enhancement.Using substrate-supported PMMA(poly(methyl methacrylate))films as a model,we have visualized the variations in the contribution of SFG signals from buried interface and air surface.By monitoring carbonyl and C-H stretching groups,we found that SFG signals are dominated by the moieties(-CH2,-CH3,-OCH3 and C=O)segregated at the PMMA/air surface for the thin films while they are mainly contributed by the groups(-OCH3 and C=O)at the substrate/PMMA buried interface for the thick films.At the buried interface,the tilt angle of C=O decreases from65°to 43°as the film preparation concentration increases;in contrast,the angles at the air surface fall in the range from 38°to 21°.Surface plasmon generated by gold nanorods can largely enhance SFG signals,particularly the signals from the buried interface.展开更多
This paper introduces the architecture and implementation of an industrial robot control system based on Windows NT. This robot control system, which is based on a single-processor structure, can run on general indust...This paper introduces the architecture and implementation of an industrial robot control system based on Windows NT. This robot control system, which is based on a single-processor structure, can run on general industrial computers. Owing to using Windows NT's real-time extension RTX, the control system can achieve good realtime performance and friendly user interface in one general-purpose operating system. A three layer hierarchical architecture of control software is proposed to make the system more scalable and flexible. Furthermore a communication and configuration system is implemented to enable modules to communicate with each other, which make the control system scalable and flexible.展开更多
基金Project(2011CB605804) supported by the National Basic Research Development Program of ChinaProject(2015JJ3167) supported by the Natural Science Foundation of Hunan Province,ChinaProject(2013M531810) supported by the Postdoctoral Science Foundation of China
文摘Carbon/carbon composites modified by NiAl alloy were prepared using vacuum reactive melt infiltration methods with NiAl and titanium mixed powders as raw materials. The microstructures were investigated by scanning electron microscopy. The fracture behavior, infiltration and oxidation mechanism were further discussed. The results indicated that NiAl alloy exhibited good wettability on the C/C preform because a TiC reaction layer formed at the interface. Multi-layer（PyC/TiC/NiAl＋TiC） coating evenly and compactly distributed on the surface of the carbon fiber in tubular form. The penetration depth of molten NiAl alloys depended on the reaction between the PyC and titanium. The impact fracture was inclined to along the interface between the NiAl permeability layer and C/C matrix. Al_2TiO_5 and TiO_2 formed on the surface, while the interior multi-layer tubular structure partially remained after oxidation at 1773 K for 30 min.
文摘The interfacial interaction existing in the Ni ZrO 2 composite plating has been investigated. The experimental results show that no new phases were formed in the interfacial regions between matrix Ni and ZrO 2 particles, but an orbital interaction through the mutual overlap of the d orbits does exist in the interfacial regions between Ni atoms and Zr 3+ ions.
基金the National Natural Science Foundation of China(10672052)the Natural Science Foundation of Jiangsu Province(BK2007178)~~
文摘Based on the building of a theoretical model for the large eddy structure, the nonlinear effect of the local rough wall on the large eddy structure in the boundary layer is studied by direct numerical simulation. Numerical results show that factors of the local rough feature, the distributing structure and the intensity, etc. play an important role in the evolution of the large eddy structure in the boundary layer.
基金supported by the National Key Research and Development Program of China(No.2018YFA0208700 and No.2017YFA0303500)the National Natural Science Foundation of China(No.21925302,No.21633007,and No.21873090)Anhui Initiative in Quantum Information Technologies(AHY090000)。
文摘Sum frequency generation vibrational spectroscopy(SFG-VS)is a powerful technique for determining molecular structures at both buried interface and air surface.Distinguishing the contribution of SFG signals from buried interface and air surface is crucial to the applications in devices such as microelectronics and bio-tips.Here we demonstrate that the SFG spectra from buried interface and air surface can be differentiated by controlling the film thickness and employment of surface-plasmon enhancement.Using substrate-supported PMMA(poly(methyl methacrylate))films as a model,we have visualized the variations in the contribution of SFG signals from buried interface and air surface.By monitoring carbonyl and C-H stretching groups,we found that SFG signals are dominated by the moieties(-CH2,-CH3,-OCH3 and C=O)segregated at the PMMA/air surface for the thin films while they are mainly contributed by the groups(-OCH3 and C=O)at the substrate/PMMA buried interface for the thick films.At the buried interface,the tilt angle of C=O decreases from65°to 43°as the film preparation concentration increases;in contrast,the angles at the air surface fall in the range from 38°to 21°.Surface plasmon generated by gold nanorods can largely enhance SFG signals,particularly the signals from the buried interface.
基金Supported by National Natural Science foundation of China (No. 69975014)
文摘This paper introduces the architecture and implementation of an industrial robot control system based on Windows NT. This robot control system, which is based on a single-processor structure, can run on general industrial computers. Owing to using Windows NT's real-time extension RTX, the control system can achieve good realtime performance and friendly user interface in one general-purpose operating system. A three layer hierarchical architecture of control software is proposed to make the system more scalable and flexible. Furthermore a communication and configuration system is implemented to enable modules to communicate with each other, which make the control system scalable and flexible.
