As one of the key boundary conditions during casting solidification process, the interfacial heat transfer coefficient (IHTC) affects the temperature variation and distribution. Based on the improved nonlinear estimat...As one of the key boundary conditions during casting solidification process, the interfacial heat transfer coefficient (IHTC) affects the temperature variation and distribution. Based on the improved nonlinear estimation method (NEM), thermal measurements near both bottom and lateral metal-mold interfaces throughout A356 gravity casting process were carried out and applied to solving the inverse heat conduction problem (IHCP). Finite element method (FEM) is employed for modeling transient thermal fields implementing a developed NEM interface program to quantify transient IHTCs. It is found that IHTCs at the lateral interface become stable after the volumetric shrinkage of casting while those of the bottom interface reach the steady period once a surface layer has solidified. The stable value of bottom IHTCs is 750 W/(m^2·℃), which is approximately 3 times that at the lateral interface. Further analysis of the interplay between spatial IHTCs and observed surface morphology reveals that spatial heat transfer across casting-mold interfaces is the direct result of different interface evolution during solidification process.展开更多
Dual-phase lag (DPL) model is used to describe the non-Fourier heat conduction in a finite medium where the boundary at x=0 is heated by a rectangular pulsed energy source and the other boundary is tightly contactal w...Dual-phase lag (DPL) model is used to describe the non-Fourier heat conduction in a finite medium where the boundary at x=0 is heated by a rectangular pulsed energy source and the other boundary is tightly contactal with another medium and satisfies the continuous boundary condition. Numerical solution of thes kind of non-Fourier heat conduction is presented in this paper. The results are compared with those predicted by the hyperbolic heat conduction (HHC) equation.展开更多
基金Project(TC160A310-10-01)supported by the National Industry Base Enhanced Program,ChinaProjects(2015B090926002,2013A090100002)supported by Science and Technology of Guangdong Province,ChinaProject(2016AG100932)supported by Key Technology Program of Foshan,China
文摘As one of the key boundary conditions during casting solidification process, the interfacial heat transfer coefficient (IHTC) affects the temperature variation and distribution. Based on the improved nonlinear estimation method (NEM), thermal measurements near both bottom and lateral metal-mold interfaces throughout A356 gravity casting process were carried out and applied to solving the inverse heat conduction problem (IHCP). Finite element method (FEM) is employed for modeling transient thermal fields implementing a developed NEM interface program to quantify transient IHTCs. It is found that IHTCs at the lateral interface become stable after the volumetric shrinkage of casting while those of the bottom interface reach the steady period once a surface layer has solidified. The stable value of bottom IHTCs is 750 W/(m^2·℃), which is approximately 3 times that at the lateral interface. Further analysis of the interplay between spatial IHTCs and observed surface morphology reveals that spatial heat transfer across casting-mold interfaces is the direct result of different interface evolution during solidification process.
文摘Dual-phase lag (DPL) model is used to describe the non-Fourier heat conduction in a finite medium where the boundary at x=0 is heated by a rectangular pulsed energy source and the other boundary is tightly contactal with another medium and satisfies the continuous boundary condition. Numerical solution of thes kind of non-Fourier heat conduction is presented in this paper. The results are compared with those predicted by the hyperbolic heat conduction (HHC) equation.
