期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Pt—C—PTFE疏水性催化剂的H_2O—H_2同位素交换研究 被引量:17
1
作者 毛世奇 郁婷婷 +1 位作者 李洪 高文尚 《核化学与放射化学》 CAS CSCD 北大核心 1990年第2期107-112,共6页
本文简要介绍了Pt-C-PTFE疏水性催化剂的制备方法,采用此种催化剂进行了T-H交换实验,得到催化活性与温度、氢气流速的关系。同时对气/液并流和气/汽并流交换实验作了比较,后者活性大大高于前者。此外,在疏水性催化济中加入适量亲水性载... 本文简要介绍了Pt-C-PTFE疏水性催化剂的制备方法,采用此种催化剂进行了T-H交换实验,得到催化活性与温度、氢气流速的关系。同时对气/液并流和气/汽并流交换实验作了比较,后者活性大大高于前者。此外,在疏水性催化济中加入适量亲水性载体,可以大大提高催化剂的交换效率。 展开更多
关键词 疏水性催化剂 Pt-C-PTFE 氚交换
下载PDF
新型疏水性固体酸SBA-15-SO_3H催化剂制备及其催化性能 被引量:9
2
作者 张明伟 王力 高登征 《工业催化》 CAS 2008年第5期28-30,共3页
采用水热法直接合成表面含丙磺酸基和不同烷基(如甲基、辛基和十六烷基)的疏水性介孔分子筛固体酸SBA-15-SO3H.实验表明,固体酸的硫质量分数为3.53%~4.255%,酸含量为(0.84~1.08)mmol·g^-1,相对润湿接触角θr(SBA-1... 采用水热法直接合成表面含丙磺酸基和不同烷基(如甲基、辛基和十六烷基)的疏水性介孔分子筛固体酸SBA-15-SO3H.实验表明,固体酸的硫质量分数为3.53%~4.255%,酸含量为(0.84~1.08)mmol·g^-1,相对润湿接触角θr(SBA-15SO3H)〈θr(CH3-SBA-15-SO3H)〈θr(C8H17-SBA-15-SO3H)〈θr(C16H33-SBA-15-SO3H).催化剂对冰醋酸和正丁醇的酯化反应转化率可达75.5%,转化率随相对润湿角的增大而增大。 展开更多
关键词 催化化学 SBA-15分子筛 水性固体酸催化剂 磺酸 乙酸正丁酯
下载PDF
疏水性空心SiO_2/TiO_2光催化剂的制备及性能研究
3
作者 刘秀宇 解博 +2 位作者 曾祥朋 王双飞 陈国宁 《材料导报》 EI CAS CSCD 北大核心 2016年第2期13-17,共5页
选取TiO_2为原料,经过空心化、SiO_2包覆、疏水性改性,制备了疏水性空心SiO_2/TiO_2光催化剂,并利用TEM和FTIR对其进行表征,对比研究了改性前后的催化剂。TEM图像显示制备的催化剂具有核-壳空心结构,且其表面均匀包覆一层物质;FTIR图谱... 选取TiO_2为原料,经过空心化、SiO_2包覆、疏水性改性,制备了疏水性空心SiO_2/TiO_2光催化剂,并利用TEM和FTIR对其进行表征,对比研究了改性前后的催化剂。TEM图像显示制备的催化剂具有核-壳空心结构,且其表面均匀包覆一层物质;FTIR图谱分析可知,其表面包覆层是SiO_2,且硅烷偶联剂KH-570与其成功产生化学键合;吸附实验时改性光催化剂漂浮在废水表面,提高了光照效率。以甲基橙模拟染料废水的降解率考察改性光催化剂的活性,初始甲基橙浓度为10mg/L、pH值为4时,对甲基橙的脱色率最佳,并且Langmuir和Freundlich等温模型均能较好地描述吸附过程。经动力学的一次拟合,说明该吸附是一个以化学吸附为主导作用的多因素控制过程。 展开更多
关键词 水性空心Si02/Ti02光催化剂催化降解 甲基橙
下载PDF
Stability of Pd-Cu-Cl_x/Al_2O_3 catalyst for CO oxidation 被引量:4
4
作者 LiWang XiaoqingLu +3 位作者 WeiWang WangchengZhan YanglongGuo YunGuo 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2018年第9期1560-1567,共8页
By taking advantage of silylanization, Al2O3 support was modified by organosilane and supported Pd-Cu-Clx/Al2O3 catalysts were prepared. The effects of hydrophobicity on catalyst stability during CO oxidation were inv... By taking advantage of silylanization, Al2O3 support was modified by organosilane and supported Pd-Cu-Clx/Al2O3 catalysts were prepared. The effects of hydrophobicity on catalyst stability during CO oxidation were investigated. The physicochemical properties and redox potential of the catalyst were characterized by N2 adsorption-desorption, XRD, H2-TPR, and XPS. In order to understand the relationship between the oxidation stability of CO and the presence of water, the CO oxidation mechanism was studied by in situ DRIFT. Support pretreatment markedly promoted catalyst stability during CO oxidation; CO conversion was 78% after 150 h at saturated humidity and freezing point. Modification led to an obvious decrease in chloride ion concentration and enhancement in hydrophobicity. The role of water in CO oxidation was complicated. The presence of water favored CO oxidation over active Pd~+ species and Pd0 reoxidation by Cu^(2+) species. Meanwhile, water also inhibited the formation of the active Pd~+ species and helped to produce carbonate species. Compared with the form of the carbonate species, the inhibition of water to produce active Pd~+ species played the main detrimental role in catalyst stability. 展开更多
关键词 CO oxidation STABILITY MOISTURE HYDROPHOBICITY SUPPORTED Wackercatalyst
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部