Most of the carbonates in the Tarim Basin in northwest China are low-porosity and low-permeability rocks. Owing to the complexity of porosity in carbonates, conventional rock- physics models do not describe the relati...Most of the carbonates in the Tarim Basin in northwest China are low-porosity and low-permeability rocks. Owing to the complexity of porosity in carbonates, conventional rock- physics models do not describe the relation between velocity and porosity for the Tarim Basin carbonates well. We propose the porous-grain-upper-boundary （PGU） model for estimating the relation between velocity and porosity for low-porosity carbonates. In this model, the carbonate sediments are treated as packed media of porous elastic grains, and the carbonate pores are divided into isolated and connected pores The PGU model is modified from the porous-grain-stiff-sand （PGST） model by replacing the critical porosity with the more practical isolated porosity. In the implementation, the effective elastic constants of the porous grains are calculated by using the differential effective medium （DEM） model. Then, the elastic constants of connected porous grains in dry rocks are calculated by using the modified upper Hashin-Shtrikman bound. The application to the Tarim carbonates shows that relative to other conventional effective medium models the PGU model matches the well log data well.展开更多
Seismic attributes, such as P- and S-wave velocity, Poisson＇s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The nonuniqueness can be largely reduced using Lame imp...Seismic attributes, such as P- and S-wave velocity, Poisson＇s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The nonuniqueness can be largely reduced using Lame impedances instead of acoustic impedances as additional constraints. We have followed this method to constitute a petrologic composition model of the upper crust in the Bohai Bay basin, China. We briefly review the seismic parameters used for discrimination of rock types and focus our attention on the sensitivity of different combinations of parameters to determine the composition of materials. Corrections for pressure and temperature are performed in order to compare elastic wave velocities and densities measured at room temperature and surface pressure in laboratory with those for representative rock parameters. In a second step, we find the rock classes in the tested area by contrasting known data to laboratory measurements on a variety of rock samples extracted in the area. The basic field data are P-wave velocity values collected along a seismic profile conducted in the Bozhong Depression. The different rock types belonging to a particular rock class are finally constrained by the seismic velocities, Poisson＇s ratio, density, acoustic impedance, and Lame imoedance related to the topmost 10 km of the Bohai Bav crust.展开更多
The methodology of catchment extraction especially from regular grid digital elevation models (DEMs) is briefly reviewed. Then an efficient algorithm, which combines vector process and traditional neighbourhood raster...The methodology of catchment extraction especially from regular grid digital elevation models (DEMs) is briefly reviewed. Then an efficient algorithm, which combines vector process and traditional neighbourhood raster process, is designed for extracting the catchments and subcatchments from depressionless DEMs. The catchment area of each river in the grid DEM data is identified and delineated, then is divided into subcatchments as required. Compared to traditional processes, this method for identifying catchments focuses on the boundaries instead of the area inside the catchments and avoids the boundary intersection phenomena. Last, the algorithm is tested with a set of DEMs of different sizes, and the result proves that the computation efficiency and accuracy are better than existent methods.展开更多
The reservoir conditions,oil and gas charge history and accumulation phases were studied for Yingshan Formation of Yuqi block,and an oil and gas accumulation model was established by using the techniques of reservoir ...The reservoir conditions,oil and gas charge history and accumulation phases were studied for Yingshan Formation of Yuqi block,and an oil and gas accumulation model was established by using the techniques of reservoir prediction,fluorescence thin section and fluid inclusion analysis under the guidance of the theories of oil and gas accumulation.The results indicate that the main rock types in Yingshan Formation are micrite and calcarenite.The carbonate reservoirs are of cave,fracture-pore and fracture types,and their physical properties are intermediate;there are at least four oil/gas charges,i.e.late Hercynian,Yanshanian,early Himalayan and middle Himalayan(Cenozoic).The most important charge periods are late Hercynian,early Himalayan and middle Himalayan;the oil and gas accumulation model is self source-lateral expulsion of hydrocarbon-multistage accumulation,or hydrocarbon sourced from and preserved in the same old rocks-long term expulsion of hydrocarbon-multistage accumulation.展开更多
Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reser...Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reservoir in Southern Qinshui Basin. Flow patterns of methane and water in pore-fracture system and hydraulic fracture were discussed by using limit method and average method. Based on the structure model and flow pattern of post-fracturing high-rank coal reservoir, flow patterns of methane and water were established. Results show that seepage pattern of methane in pore-fracture system is linked with pore diameter, fracture width, coal bed pressure and flow velocity. While in hydraulic fracture, it is controlled by fracture height, pressure and flow velocity. Seepage pattern of water in pore-fracture system is linked with pore diameter, fracture width and flow velocity. While in hydraulic fracture, it is controlled by fracture height and flow velocity. Pores and fractures in different sizes are linked up by ultramicroscopic fissures, micro-fissures and hydraulic fracture. In post-fracturing high-rank coal reservoir, methane has level-three flow and gets through triple medium to the wellbore; and water passes mainly through double medium to the wellbore which is level-two flow.展开更多
Calculation of the groundwater recoverable resource is the main part of groundwater resource evaluation. The three-dimensional groundwater flow model in Linfen Basin was established by GMS software. Then the numerical...Calculation of the groundwater recoverable resource is the main part of groundwater resource evaluation. The three-dimensional groundwater flow model in Linfen Basin was established by GMS software. Then the numerical model was calibrated by observed groundwater level from February to December in 2 000. Based on the calibrated model, the groundwater recoverable resource is calculated. The simulation result shows that under the given value of the groundwater recoverable resource, the groundwater level would decrease significantly in the first 1 000 days, while the water level would drop slowly in 1 000 to 2 000 days, and the water level change tend to be stable after 2000 days.展开更多
Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses...Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses show that the oil shale has a homologous organic matter source,with a mix of plankton and advanced plants.U/Th and V/Ni ratios suggest that the redox condition is dominated by a reducing condition,and the degree of anoxia in the Tongchuan area is higher than that of the Xunyi area.Sr/Ba ratios illustrate that the oil shale is deposited in fresh water and the paleosalinity in the Tongchuan area is slightly higher.Fe/Ti ratios imply that the Tongchuan area underwent obvious hydrothermal fluid activities.Sr/Cu ratios show warm and humid paleoclimate in both areas.As assessed by(La/Yb)NASC,the deposition rate in the Tongchuan area is relatively lower.Fe/Co and Th/U ratios suggest that the paleo-water-depth in the Tongchuan area is deeper.The source rock could have the advance plants source,which must have close relationship with the Qinling orogeny.Comparing the paleoenvironment,the Tongchuan area has better depositional conditions,and is the key oil shale exploration area in the southern Ordos Basin.展开更多
Knowledge of the spatial distribution of permafrost and the effects of climate on ground temperature are important for land use and infrastructure development on the Qinghai-Tibet Plateau(QTP). Different permafrost mo...Knowledge of the spatial distribution of permafrost and the effects of climate on ground temperature are important for land use and infrastructure development on the Qinghai-Tibet Plateau(QTP). Different permafrost models have been developed to simulate the ground temperature and active layer thickness(ALT). In this study, Temperature at Top of Permafrost(TTOP) model, Kudryavtsev model and modified Stefan solution were evaluated against detailed field measurements at four distinct field sites in the Wudaoliang Basin to better understand the applicability of permafrost models. Field data from 2012 to 2014 showed that there were notable differences in observed ground temperatures and ALTs within and among the sites. The TTOP model is relatively simple, however, when driven by averaged input values, it produced more accurate permafrost surface temperature(Tps) than the Kudryavtsev model. The modified Stefan solution resulted in a satisfactory accuracy of 90%, which was better than the Kudryavtsev model for estimating ALTs. The modified Stefan solution had the potential of being applied to climate-change studies in the future. Furthermore, additional field investigations over longer periods focusing on hydrology, which has significant influence on permafrost thaw, are necessary. These efforts should employ advanced measurement techniques to obtain adequate and extensive local parameters that will help improve model accuracy.展开更多
Formation and evolution of sedimentary basin is the clue for oil-and-gas generation zones of sedimentary cover that makes the problem of sedimentary basins geodynamics of great importance one. Geodynamics of relief is...Formation and evolution of sedimentary basin is the clue for oil-and-gas generation zones of sedimentary cover that makes the problem of sedimentary basins geodynamics of great importance one. Geodynamics of relief is defined by deep mantle movements. Mechanical-mathematical model of the lithosphere dynamics gives possibility to link the basin parameters with mantle diaper upwelling. Analysis of geophysical fields gives opportunity to evaluate the astenosphere upwelling, and the elaborated self-conjugated thermo-gravimetric model makes this evaluation reliable and trustworthy one.展开更多
基金supported by the National Basic Research Program of China(2013CB228602)the National High Technology Research Program of China(2013AA064202)the National Science and Technology Major Project of China(Grant No.2011ZX05004-003)
文摘Most of the carbonates in the Tarim Basin in northwest China are low-porosity and low-permeability rocks. Owing to the complexity of porosity in carbonates, conventional rock- physics models do not describe the relation between velocity and porosity for the Tarim Basin carbonates well. We propose the porous-grain-upper-boundary （PGU） model for estimating the relation between velocity and porosity for low-porosity carbonates. In this model, the carbonate sediments are treated as packed media of porous elastic grains, and the carbonate pores are divided into isolated and connected pores The PGU model is modified from the porous-grain-stiff-sand （PGST） model by replacing the critical porosity with the more practical isolated porosity. In the implementation, the effective elastic constants of the porous grains are calculated by using the differential effective medium （DEM） model. Then, the elastic constants of connected porous grains in dry rocks are calculated by using the modified upper Hashin-Shtrikman bound. The application to the Tarim carbonates shows that relative to other conventional effective medium models the PGU model matches the well log data well.
基金supported by the National Natural Science Foundation of China (Grant 20930140)the Chinese Academy of Sciences and the sponsors of the Centre for Reservoir Geophysics of the Imperial College
文摘Seismic attributes, such as P- and S-wave velocity, Poisson＇s ratio, and acoustic impedances, all generally can be used for distinguishing different rock types. The nonuniqueness can be largely reduced using Lame impedances instead of acoustic impedances as additional constraints. We have followed this method to constitute a petrologic composition model of the upper crust in the Bohai Bay basin, China. We briefly review the seismic parameters used for discrimination of rock types and focus our attention on the sensitivity of different combinations of parameters to determine the composition of materials. Corrections for pressure and temperature are performed in order to compare elastic wave velocities and densities measured at room temperature and surface pressure in laboratory with those for representative rock parameters. In a second step, we find the rock classes in the tested area by contrasting known data to laboratory measurements on a variety of rock samples extracted in the area. The basic field data are P-wave velocity values collected along a seismic profile conducted in the Bozhong Depression. The different rock types belonging to a particular rock class are finally constrained by the seismic velocities, Poisson＇s ratio, density, acoustic impedance, and Lame imoedance related to the topmost 10 km of the Bohai Bav crust.
文摘The methodology of catchment extraction especially from regular grid digital elevation models (DEMs) is briefly reviewed. Then an efficient algorithm, which combines vector process and traditional neighbourhood raster process, is designed for extracting the catchments and subcatchments from depressionless DEMs. The catchment area of each river in the grid DEM data is identified and delineated, then is divided into subcatchments as required. Compared to traditional processes, this method for identifying catchments focuses on the boundaries instead of the area inside the catchments and avoids the boundary intersection phenomena. Last, the algorithm is tested with a set of DEMs of different sizes, and the result proves that the computation efficiency and accuracy are better than existent methods.
基金Project(P05009) supported by the Item of Science and Technology and Development of SINOPEC Stock Limited Company of China
文摘The reservoir conditions,oil and gas charge history and accumulation phases were studied for Yingshan Formation of Yuqi block,and an oil and gas accumulation model was established by using the techniques of reservoir prediction,fluorescence thin section and fluid inclusion analysis under the guidance of the theories of oil and gas accumulation.The results indicate that the main rock types in Yingshan Formation are micrite and calcarenite.The carbonate reservoirs are of cave,fracture-pore and fracture types,and their physical properties are intermediate;there are at least four oil/gas charges,i.e.late Hercynian,Yanshanian,early Himalayan and middle Himalayan(Cenozoic).The most important charge periods are late Hercynian,early Himalayan and middle Himalayan;the oil and gas accumulation model is self source-lateral expulsion of hydrocarbon-multistage accumulation,or hydrocarbon sourced from and preserved in the same old rocks-long term expulsion of hydrocarbon-multistage accumulation.
基金Projects(41330638,41272154)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),ChinaProject(2014M551705)supported by the China Postdoctoral Science Foundation
文摘Field geological work, field engineering monitoring, laboratory experiments and numerical simulation were used to study the development characteristics of pore-fracture system and hydraulic fracture of No.3 coal reservoir in Southern Qinshui Basin. Flow patterns of methane and water in pore-fracture system and hydraulic fracture were discussed by using limit method and average method. Based on the structure model and flow pattern of post-fracturing high-rank coal reservoir, flow patterns of methane and water were established. Results show that seepage pattern of methane in pore-fracture system is linked with pore diameter, fracture width, coal bed pressure and flow velocity. While in hydraulic fracture, it is controlled by fracture height, pressure and flow velocity. Seepage pattern of water in pore-fracture system is linked with pore diameter, fracture width and flow velocity. While in hydraulic fracture, it is controlled by fracture height and flow velocity. Pores and fractures in different sizes are linked up by ultramicroscopic fissures, micro-fissures and hydraulic fracture. In post-fracturing high-rank coal reservoir, methane has level-three flow and gets through triple medium to the wellbore; and water passes mainly through double medium to the wellbore which is level-two flow.
基金National Basic Research Program of China (No. G1999043606)
文摘Calculation of the groundwater recoverable resource is the main part of groundwater resource evaluation. The three-dimensional groundwater flow model in Linfen Basin was established by GMS software. Then the numerical model was calibrated by observed groundwater level from February to December in 2 000. Based on the calibrated model, the groundwater recoverable resource is calculated. The simulation result shows that under the given value of the groundwater recoverable resource, the groundwater level would decrease significantly in the first 1 000 days, while the water level would drop slowly in 1 000 to 2 000 days, and the water level change tend to be stable after 2000 days.
基金Projects(41173055,41772118)supported by the National Natural Science Foundation of China
文摘Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses show that the oil shale has a homologous organic matter source,with a mix of plankton and advanced plants.U/Th and V/Ni ratios suggest that the redox condition is dominated by a reducing condition,and the degree of anoxia in the Tongchuan area is higher than that of the Xunyi area.Sr/Ba ratios illustrate that the oil shale is deposited in fresh water and the paleosalinity in the Tongchuan area is slightly higher.Fe/Ti ratios imply that the Tongchuan area underwent obvious hydrothermal fluid activities.Sr/Cu ratios show warm and humid paleoclimate in both areas.As assessed by(La/Yb)NASC,the deposition rate in the Tongchuan area is relatively lower.Fe/Co and Th/U ratios suggest that the paleo-water-depth in the Tongchuan area is deeper.The source rock could have the advance plants source,which must have close relationship with the Qinling orogeny.Comparing the paleoenvironment,the Tongchuan area has better depositional conditions,and is the key oil shale exploration area in the southern Ordos Basin.
基金funded by the State Key Development Program of Basic Research of China(973 Plan,Grant No.2012CB026101)the National Science and Technology Support Plan(Grant Nos.2014BAG05B01,2014BAG05B05)
文摘Knowledge of the spatial distribution of permafrost and the effects of climate on ground temperature are important for land use and infrastructure development on the Qinghai-Tibet Plateau(QTP). Different permafrost models have been developed to simulate the ground temperature and active layer thickness(ALT). In this study, Temperature at Top of Permafrost(TTOP) model, Kudryavtsev model and modified Stefan solution were evaluated against detailed field measurements at four distinct field sites in the Wudaoliang Basin to better understand the applicability of permafrost models. Field data from 2012 to 2014 showed that there were notable differences in observed ground temperatures and ALTs within and among the sites. The TTOP model is relatively simple, however, when driven by averaged input values, it produced more accurate permafrost surface temperature(Tps) than the Kudryavtsev model. The modified Stefan solution resulted in a satisfactory accuracy of 90%, which was better than the Kudryavtsev model for estimating ALTs. The modified Stefan solution had the potential of being applied to climate-change studies in the future. Furthermore, additional field investigations over longer periods focusing on hydrology, which has significant influence on permafrost thaw, are necessary. These efforts should employ advanced measurement techniques to obtain adequate and extensive local parameters that will help improve model accuracy.
文摘Formation and evolution of sedimentary basin is the clue for oil-and-gas generation zones of sedimentary cover that makes the problem of sedimentary basins geodynamics of great importance one. Geodynamics of relief is defined by deep mantle movements. Mechanical-mathematical model of the lithosphere dynamics gives possibility to link the basin parameters with mantle diaper upwelling. Analysis of geophysical fields gives opportunity to evaluate the astenosphere upwelling, and the elaborated self-conjugated thermo-gravimetric model makes this evaluation reliable and trustworthy one.
