The commercial FEM software ANSYS was used to analyze the failure characteristics of overburden strata under the conditions of different lengths of mining faces. It was shown that the parameters of mining faces, espec...The commercial FEM software ANSYS was used to analyze the failure characteristics of overburden strata under the conditions of different lengths of mining faces. It was shown that the parameters of mining faces, especially the length was the important factor to the failure heights and shapes of overburden strata. Fuzzy mathematics and statistical methods were used to analyze the forecasting method of the failure height of overburden strata influenced by the parameters of mining face based on the measured data under the conditions of fully-mechanized mining of general hardness cover rocks. On the basis of these analyses, a new forecasting formula was gotten. The forecasting result conforms to the in situ measured value. The result has a very important application value in safe and high-efficient mining, and has a very important advancing function to theoretical studies.展开更多
Study of seismic activity in the Kuqa area enables us to infer some possible active faults in basement from the epicentral distribution on different profiles. The relations between active faults in the basement and su...Study of seismic activity in the Kuqa area enables us to infer some possible active faults in basement from the epicentral distribution on different profiles. The relations between active faults in the basement and surface structures are analyzed and the difference between sedimentary cover and basement in their deformation characteristics and the genesis are discussed. The following conclusions have been drawn: (1) the epicentral distribution indicates that, the east Qiulitag and south and north Qiulitag deep faults in the basement correspond to the east and west Qiulitag anticlines, respectively. Moreover, deep faults also exist beneath the Yiqiklik and Yaken anticlines. It indicates that the formation of surface structures is controlled by deep structures; (2) A NE-trending strike-slip fault develops along the line from the western termination of Yiqiklik structure to Dongqiu Well 5 and a NW-trending active fault on the western side of Baicheng. The two active faults across the tectonic strike are the main causes for tectonic segmentation of the Kuqa depression and possibly the cause for the middle segment (Kuqa-Baicheng) of the depression to be more shortened than both its eastern and western terminations; (3) The difference between the sedimentary cover and basement in their deformation characteristics depends mainly on the different properties of media between them. The lithospheric strength of the basement in the basin is fairly high, which determines the basement deformation to be mainly of brittle fracture——seismic activity. While the strength of sedimentary cover is low, where there exist weak thin layers, such as coal and gyps. Under the effect of strong tectonic compression, the sedimentary rocks may undergo strong viscous or plastic flow deformation; meanwhile, an aseismic detachment may take place along the weak layers.展开更多
Whitecapping plays an important role in many air-sea exchange and upper ocean processes.Traditionally,whitecap coverage is parameterized as a function of wind speed only.At present,the relative speed of ocean current ...Whitecapping plays an important role in many air-sea exchange and upper ocean processes.Traditionally,whitecap coverage is parameterized as a function of wind speed only.At present,the relative speed of ocean current to wind is considered to be important in the air-sea exchange parameterization which is the function of wind speed only.In this paper,the effects of ocean surface velocity (current velocity and wave induced velocity) and the wave parameters on whitecap coverage through relative speeds are investigated,by applying a 2-parameter whitecap coverage model to the Atlantic Ocean.It is found that the impacts of both current and wave on whitecap coverage are considerable in the most part of the Atlantic Ocean.It is interesting that the effect of wave is more significant than that of current.展开更多
The exchanges of NOx between snow and air have significant impact on the atmospheric components and photochemical processes in the overlying boundary layer. Such exchanges increase the oxidizing capacity of the atmosp...The exchanges of NOx between snow and air have significant impact on the atmospheric components and photochemical processes in the overlying boundary layer. Such exchanges increase the oxidizing capacity of the atmosphere and may have a crucial impact on the air signals that are retrieved from ice cores. In the recent years, sunlit snow and ice have been demonstrated to be important NOx sources in the polar atmospheric boundary layer. This paper makes a thorough review on the release of NOx from snow and ice, including field observations and experimental evidences, release mechanisms and influential parameters that affect such a release process, polar NOx concentrations and fluxes, and environmental impacts of the chemical processes of NOx in the polar atmospheric boundary layer. In the Tibetan Plateau, the released NOx observed recently in the sunlit snow/ice-cover is 1-order magnitude more than that in polar regions, but further scientific research is still needed to reveal its impact on the atmospheric oxidizing capacity.展开更多
The orientation control of graphene overlayers on metal surface is an important issue which remains as a challenge in graphene growth on Ni surface. Here we have demonstrated that epitaxial graphene overlayers can be ...The orientation control of graphene overlayers on metal surface is an important issue which remains as a challenge in graphene growth on Ni surface. Here we have demonstrated that epitaxial graphene overlayers can be obtained by annealing a nickel carbide covered Ni（111） surface using in situ surface imaging techniques. Epitaxial graphene islands nucleate and grow via segregation of dissolved carbon atoms to the top surface at about 400 ℃. This is in contrast to a mixture of epitaxial and non-epi- taxial graphene domains grown directly on Ni（111） at 540 ℃. The different growth behaviors are related to the nucleation dynamics which is controlled by local carbon densities in the near surface region.展开更多
By using the first-principles calculations,we have systematically investigated the adsorption of atomic oxygen on Cu(111) surface for a wide range of coverages Θ(from 0.11 to 1.00 ML) and adsorption sites.We found th...By using the first-principles calculations,we have systematically investigated the adsorption of atomic oxygen on Cu(111) surface for a wide range of coverages Θ(from 0.11 to 1.00 ML) and adsorption sites.We found that the fcc-hollow site is the most stable site for oxygen adsorption.The adsorption energy decreases with increasing oxygen coverage due to the increasing repulsive interaction in the overlayer O adatoms.Except for coverage of 1.00 ML,the oxygen-induced lateral relaxations and bucklings are found in the outermost three Cu layers,and the hillock-like as well as ridge-like bucklings are also found for Θ=0.25 ML and Θ=0.75 ML as well as Θ=0.50 ML,respectively.With an increasing oxygen coverage,the work function increases and the surface dipole moment decreases.Electron transfer from the first layer Cu atoms to O adatoms indicates the O-Cu bond having some degree of ionic character,while the hybridization between O 2p and Cu 3d orbitals implies that it also has some degree of covalence character.Moreover,with the increasing oxygen coverage,more Cu 3d and O 2p states are empty thus weakening the binding of O/Cu(111) system,but increase in the PDOS at the Fermi level.This implies an enhancement in the metallic character of the O/Cu(111) system.展开更多
文摘The commercial FEM software ANSYS was used to analyze the failure characteristics of overburden strata under the conditions of different lengths of mining faces. It was shown that the parameters of mining faces, especially the length was the important factor to the failure heights and shapes of overburden strata. Fuzzy mathematics and statistical methods were used to analyze the forecasting method of the failure height of overburden strata influenced by the parameters of mining face based on the measured data under the conditions of fully-mechanized mining of general hardness cover rocks. On the basis of these analyses, a new forecasting formula was gotten. The forecasting result conforms to the in situ measured value. The result has a very important application value in safe and high-efficient mining, and has a very important advancing function to theoretical studies.
文摘Study of seismic activity in the Kuqa area enables us to infer some possible active faults in basement from the epicentral distribution on different profiles. The relations between active faults in the basement and surface structures are analyzed and the difference between sedimentary cover and basement in their deformation characteristics and the genesis are discussed. The following conclusions have been drawn: (1) the epicentral distribution indicates that, the east Qiulitag and south and north Qiulitag deep faults in the basement correspond to the east and west Qiulitag anticlines, respectively. Moreover, deep faults also exist beneath the Yiqiklik and Yaken anticlines. It indicates that the formation of surface structures is controlled by deep structures; (2) A NE-trending strike-slip fault develops along the line from the western termination of Yiqiklik structure to Dongqiu Well 5 and a NW-trending active fault on the western side of Baicheng. The two active faults across the tectonic strike are the main causes for tectonic segmentation of the Kuqa depression and possibly the cause for the middle segment (Kuqa-Baicheng) of the depression to be more shortened than both its eastern and western terminations; (3) The difference between the sedimentary cover and basement in their deformation characteristics depends mainly on the different properties of media between them. The lithospheric strength of the basement in the basin is fairly high, which determines the basement deformation to be mainly of brittle fracture——seismic activity. While the strength of sedimentary cover is low, where there exist weak thin layers, such as coal and gyps. Under the effect of strong tectonic compression, the sedimentary rocks may undergo strong viscous or plastic flow deformation; meanwhile, an aseismic detachment may take place along the weak layers.
基金Supported by Ministry of Science and Technology of China (Nos.2005CB422307 and 2006BAC03B01)National Natural Science Foundation of China (No.40830959)
文摘Whitecapping plays an important role in many air-sea exchange and upper ocean processes.Traditionally,whitecap coverage is parameterized as a function of wind speed only.At present,the relative speed of ocean current to wind is considered to be important in the air-sea exchange parameterization which is the function of wind speed only.In this paper,the effects of ocean surface velocity (current velocity and wave induced velocity) and the wave parameters on whitecap coverage through relative speeds are investigated,by applying a 2-parameter whitecap coverage model to the Atlantic Ocean.It is found that the impacts of both current and wave on whitecap coverage are considerable in the most part of the Atlantic Ocean.It is interesting that the effect of wave is more significant than that of current.
基金supported by the Fund of Polar Scientific Research(No.20080216) of State Ocean Administration, Chinaby Chinese Natural Science Foundation(No. 20407001,No.40701170)
文摘The exchanges of NOx between snow and air have significant impact on the atmospheric components and photochemical processes in the overlying boundary layer. Such exchanges increase the oxidizing capacity of the atmosphere and may have a crucial impact on the air signals that are retrieved from ice cores. In the recent years, sunlit snow and ice have been demonstrated to be important NOx sources in the polar atmospheric boundary layer. This paper makes a thorough review on the release of NOx from snow and ice, including field observations and experimental evidences, release mechanisms and influential parameters that affect such a release process, polar NOx concentrations and fluxes, and environmental impacts of the chemical processes of NOx in the polar atmospheric boundary layer. In the Tibetan Plateau, the released NOx observed recently in the sunlit snow/ice-cover is 1-order magnitude more than that in polar regions, but further scientific research is still needed to reveal its impact on the atmospheric oxidizing capacity.
基金Acknowledgments This work was supported by the National Natural Science Foundation of China （21373208, 91545204, and 21321002）, the National Basic Research Program of China （2016YFA0200200, 2013CB834603, and 2013CB933100）, and the Strategic Priority Research Program of the Chinese Academy of Sciences （XDB 17020200）. The authors are grateful for the support for Nano-X from Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences （SINANO）.
文摘The orientation control of graphene overlayers on metal surface is an important issue which remains as a challenge in graphene growth on Ni surface. Here we have demonstrated that epitaxial graphene overlayers can be obtained by annealing a nickel carbide covered Ni（111） surface using in situ surface imaging techniques. Epitaxial graphene islands nucleate and grow via segregation of dissolved carbon atoms to the top surface at about 400 ℃. This is in contrast to a mixture of epitaxial and non-epi- taxial graphene domains grown directly on Ni（111） at 540 ℃. The different growth behaviors are related to the nucleation dynamics which is controlled by local carbon densities in the near surface region.
基金supported by the National Natural Science Foundation of China (Grant No. 51071098)the State Key Development for Basic Research of China (Grant No. 2010CB631002)
文摘By using the first-principles calculations,we have systematically investigated the adsorption of atomic oxygen on Cu(111) surface for a wide range of coverages Θ(from 0.11 to 1.00 ML) and adsorption sites.We found that the fcc-hollow site is the most stable site for oxygen adsorption.The adsorption energy decreases with increasing oxygen coverage due to the increasing repulsive interaction in the overlayer O adatoms.Except for coverage of 1.00 ML,the oxygen-induced lateral relaxations and bucklings are found in the outermost three Cu layers,and the hillock-like as well as ridge-like bucklings are also found for Θ=0.25 ML and Θ=0.75 ML as well as Θ=0.50 ML,respectively.With an increasing oxygen coverage,the work function increases and the surface dipole moment decreases.Electron transfer from the first layer Cu atoms to O adatoms indicates the O-Cu bond having some degree of ionic character,while the hybridization between O 2p and Cu 3d orbitals implies that it also has some degree of covalence character.Moreover,with the increasing oxygen coverage,more Cu 3d and O 2p states are empty thus weakening the binding of O/Cu(111) system,but increase in the PDOS at the Fermi level.This implies an enhancement in the metallic character of the O/Cu(111) system.
